journal article·2020-12

Asymmetric ITIC acceptor for asymmetric benzodithiophene polymer solar cells

Kun Zhu, Yaqian Zhong, Xiangkun Wang, Feng Li, Liangmin Yu, Lei Chu, Mingliang Sun

Dyes and Pigments· Volume 183
Publisher page

Abstract

Abstract In this work, one novel asymmetric non-fullerene acceptor ITIC-3T was designed and synthesized. ITIC-3T molecule shows 1.58 eV Eg, with −3.95 eV LUMO level. Utilizing P3 (one asymmetric 2D conjugated benzodithiophene polymer) as donor material, bulk heterojunction solar cells were fabricated. The optimal device yields a PCE of 6.47% with a VOC of 0.64 V, a FF of 55.5% and a high JSC of 18.18 mA cm−2, which may be attributed to the complementary optical absorption of active blend (P3 and ITIC-3T). In general, this work demonstrates that asymmetric polymer donor and non-fullerene acceptor active layer blend is potential for fabricating efficient photovoltaic cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
2. The future of organic photovoltaics10.1039/C4CS00227J ↗
3. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
4. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
5. Nonfullerene acceptors based on extended fused rings flanked with benzothiadiazolylmethylenemalononitrile for polymer solar cells10.1039/C5TA05901A ↗
6. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
7. Recent development of efficient A-D-A type fused-ring electron acceptors for organic solar10.1016/j.solener.2018.09.008 ↗
8. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
9. Fullerene‐free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
10. Efficient post-treatment-free polymer solar cells from indacenodithiophene and fluorinated quinoxaline-based conjugated polymers10.1016/j.dyepig.2018.02.050 ↗
11. The regulation of π-bridge of indacenodithiophene-based donor-π-acceptor conjugated polymers toward efficient polymer solar cells10.1016/j.dyepig.2018.10.008 ↗
12. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
13. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
14. High‐performance as‐cast nonfullerene polymer solar cells with thicker active layer and large area exceeding 11% power conversion efficiency10.1002/adma.201704546 ↗
15. Design, synthesis, and structural characterization of the first dithienocyclopentacarbazole-based n-type organic semiconductor and its application in non-fullerene polymer solar cells10.1039/C7TA01143A ↗
16. Recent progress in molecular design of fused ring electron acceptors for organic solar cells10.1002/smll.201900134 ↗
17. Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors10.1039/C8EE01700J ↗
18. Fuse the π-bridge to acceptor moiety of donor-π-acceptor conjugated polymer: enabling an all-round enhancement in photovoltaic parameters of nonfullerene organic solar cells10.1021/acsami.9b09486 ↗
19. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
20. Heteroheptacene-cored semiconducting molecules for non-fullerene organic solar cells10.1016/j.dyepig.2017.05.026 ↗
21. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
22. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
23. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
24. Efficient semitransparent organic solar cells with tunable color enabled by an ultralow‐bandgap nonfullerene acceptor10.1002/adma.201703080 ↗
25. Tuning the optoelectronic properties of vinylene linked perylenediimide dimer by ring annulation at the inside or outside bay positions for fullerene-free organic solar cells10.1016/j.jechem.2019.03.007 ↗
26. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
27. Extension of indacenodithiophene backbone conjugation enables efficient asymmetric A–D–A type non-fullerene acceptors10.1039/C8TA07334A ↗
28. Fusion or non-fusion of quasi-two-dimensional fused perylene diimide acceptors: the importance of molecular geometry for fullerene-free organic solar cells10.1039/C9TA10174H ↗
29. A novel quasi-two-dimensional fused-perylenediimide electron acceptor for solvent additive-free non-fullerene organic solar cells10.1016/j.dyepig.2019.108119 ↗
30. Manipulating polymer donors toward a high-performance polymer acceptor based on a fused perylenediimide building block with a built-in twisting configuration10.1021/acsami.9b07067 ↗
31. An electron acceptor based on indacenodithiophene and 1, 1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
32. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
33. Fused‐ring acceptors with asymmetric side chains for high‐performance thick‐film organic solar cells10.1002/adma.201703527 ↗
34. Length evolution of fused-ring electron acceptors toward optimal blend morphology in polymer solar cells incorporating asymmetric benzodithiophene-based donors10.1039/C8TA11363G ↗
35. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
36. Asymmetric indenothiophene-based nonfullerene acceptors for binary-and ternary-blend polymer solar cells10.1016/j.dyepig.2019.107555 ↗
37. Asymmetrically noncovalently fused-ring acceptor for high-efficiency organic solar cells with reduced voltage loss and excellent thermal stability10.1016/j.nanoen.2020.104861 ↗
38. Over 15% efficiency polymer solar cells enabled by conformation tuning of newly designed asymmetric small-molecule acceptors10.1002/adfm.202000383 ↗
39. A non‐fullerene acceptor with chlorinated thienyl conjugated side chains for high‐performance polymer solar cells via toluene processing10.1002/cjoc.201900495 ↗
40. Asymmetrical vs symmetrical selenophene-annulated fused perylenediimide acceptors for efficient non-fullerene polymer solar cells10.1021/acsaem.8b01484 ↗
41. A nonfullerene acceptor utilizing a novel asymmetric multifused-ring core unit for highly efficient organic solar cells10.1039/C8TC01229F ↗
42. High‐performance eight‐membered indacenodithiophene‐based asymmetric A‐D‐A type non‐fullerene acceptors10.1002/solr.201800246 ↗
43. A small molecular electron acceptor based on asymmetric hexacyclic core of thieno [1, 2-b] indaceno [5, 6-b′] thienothiophene for efficient fullerene-free polymer solar cells10.1016/j.scib.2018.05.025 ↗
44. Designing an asymmetrical isomer to promote the LUMO energy level and molecular packing of a non-fullerene acceptor for polymer solar cells with 12.6% efficiency10.1039/C8SC02018C ↗
45. Design and properties of intermediate-sized narrow band-gap conjugated molecules relevant to solution-processed organic solar cells10.1021/ja413144u ↗
46. Narrow-band-gap conjugated chromophores with extended molecular lengths10.1021/ja310483w ↗
47. Fluorination of polythiophene derivatives for high performance organic photovoltaics10.1021/cm502229k ↗
48. Asymmetrical small molecule acceptor enabling nonfullerene polymer solar cell with fill factor Approaching 79%10.1021/acsenergylett.8b00825 ↗
49. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
50. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
51. Implication of fluorine atom on electronic properties, ordering structures, and photovoltaic performance in naphthobisthiadiazole-based semiconducting polymers10.1021/jacs.6b05418 ↗
52. Synthesis of PCDTBT-based fluorinated polymers for high open-circuit voltage in organic photovoltaics: towards an understanding of relationships between polymer energy levels engineering and ideal morphology control10.1021/am500891z ↗
53. Modifying the morphology via employing rigid phenyl side chains achieves efficient nonfullerene polymer solar cells10.1002/pola.29264 ↗
54. Critical role of molecular electrostatic potential on charge generation in organic solar cells10.1002/cjoc.201800015 ↗
55. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗