journal article·2021-10

Effects of brominated terminal groups on the performance of fused-ring electron acceptors in organic solar cells

Yang Liu, Yong Zhao, Shujing Lu, Kun Zhu, Quanliang Wang, Xiao Kang, Liangmin Yu, Shuixing Dai, Mingliang Sun

Dyes and Pigments· Volume 194
Publisher page

Abstract

Abstract We synthesize three fused-ring electron acceptors (m-ITBr, o-ITBr and IT-2Br) based on indacenodithieno[3,2-b]thiophene as the core unit and 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile with 1 or 2 bromine substituents as the end-capped unit. The effects of bromine atom number and substituted position on molecular film absorption, energy level, photovoltaic performance, charge transport and film morphology are systematically carried out. Compared with ITIC, m-ITBr, o-ITBr and IT-2Br all show red-shifted film absorption (550–750 nm) and downshifted highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energy levels. The PM6:IT-2Br based devices exhibit power conversion efficiency (PCE) of up to 12.92%, which is much higher than the reference devices based on ITIC (8.98%). In addition, all three brominated devices achieve high efficiency over 11% (11.84% for m-ITBr devices and 11.14% for o-ITBr devices). Herein, it is also concluded that bromination on terminal groups plays a vital role in enhancing the photovoltaic performance of IDTT-based FREAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Recent advances in molecular design of functional conjugated polymers for high-performance polymer solar cells10.1016/j.progpolymsci.2019.101175 ↗
4. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
5. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
6. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
7. Fused-ring electron acceptors for organic solar cells
8. Fine-tuning of side-chain orientations on nonfullerene acceptors enables organic solar cells with 17.7% efficiency10.1039/D0EE03506H ↗
9. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
10. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
11. Asymmetric electron acceptors for high-efficiency and low-energy-loss organic photovoltaics10.1002/adma.202001160 ↗
12. Highly efficient non-fullerene organic solar cells enabled by a delayed processing method using a non-halogenated solvent10.1039/D0EE02034F ↗
13. Layer-by-layer processed ternary organic photovoltaics with efficiency over 18%10.1002/adma.202007231 ↗
14. Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies10.1038/s41467-020-20580-8 ↗
15. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
16. Enhancing the performance of the electron acceptor ITIC-Th via tailoring its end groups10.1039/C7QM00547D ↗
17. Realizing small energy loss of 0.55 eV, high open-circuit voltage >1 V and high efficiency >10% in fullerene-free polymer solar cells via energy driver10.1002/adma.201605216 ↗
18. Effect of the mode of fixation of the thienyl rings on the electronic properties of electron acceptors based on indacenodithiophene (IDT)10.1016/j.dyepig.2020.109116 ↗
19. High-performance fluorinated fused-ring electron acceptor with 3D stacking and exciton/charge transport10.1002/adma.202000645 ↗
20. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
21. Nonfullerene acceptors from thieno[3,2-b]thiophene-fused naphthalene donor core with six-member-ring connection for efficient organic solar cells10.1016/j.dyepig.2020.108892 ↗
22. Effect of core size on performance of fused-ring electron acceptors10.1021/acs.chemmater.8b02222 ↗
23. Enhancing the performance of polymer solar cells via core engineering of NIR-absorbing electron acceptors10.1002/adma.201706571 ↗
24. Naphthodithiophene-based nonfullerene acceptor for high-performance organic photovoltaics: effect of extended conjugation10.1002/adma.201704713 ↗
25. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
26. Exploration of syntheses and functions of higher ladder-type π-conjugated heteroacenes10.1016/j.chempr.2018.12.013 ↗
27. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
28. Effects of fluorination position on fused‐ring electron acceptors10.1002/sstr.202000006 ↗
29. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
30. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
31. Halogenated conjugated molecules for ambipolar field-effect transistors and non-fullerene organic solar cells10.1039/C7QM00025A ↗
32. Effects of the number of bromine substitution on photovoltaic efficiency and energy Loss of benzo[1,2‐b:4,5‐b′]diselenophene-based narrow-bandgap multibrominated nonfullerene acceptors10.1002/solr.201800250 ↗
33. Bromination of the small-molecule acceptor with fixed position for high-performance solar cells10.1021/acs.chemmater.9b02501 ↗
34. A halogenation strategy for over 12% efficiency nonfullerene organic solar cells10.1002/aenm.201702870 ↗
35. Effects of halogenated end groups on the performance of nonfullerene acceptors10.1021/acsami.0c17598 ↗
36. Constructing a strongly absorbing low-bandgap polymer acceptor for high-performance all-polymer solar cells10.1002/anie.201707678 ↗
37. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗
38. High-performance nonfullerene polymer solar cells based on a fluorinated wide bandgap copolymer with a high open-circuit voltage of 1.04 V10.1039/C7TA07785H ↗
39. Halogenation on terminal groups of ITIC based electron acceptors as an effective strategy for efficient polymer solar cells10.1016/j.solener.2019.11.074 ↗
40. The discovery, design and synthesis of potent agonists of adenylyl cyclase type 2 by virtual screening combining biological evaluation10.1016/j.ejmech.2020.112115 ↗
41. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
42. Fluorination effects on indacenodithienothiophene acceptor packing and electronic structure, end-group redistribution, and solar cell photovoltaic response10.1021/jacs.8b13653 ↗