Systematic investigation of methyl substitution effect on physicochemical properties and photovoltaic performance in nonfullerene small-molecule electron acceptors
Source abstract
Abstract
Abstract Two new n-type organic semiconductor (n-OS) acceptors IDTPC-Me and IDTPC-DMe were designed and synthesized, which were based on a five-ring fused core (IDT) and thiophene-fused ending groups with one or two methyl substitution. The introduction of the methyl group significantly elevated the lowest unoccupied molecular orbital (LUMO) level and affected the intermolecular interaction of acceptors. Photovoltaic performance of the acceptors was investigated by fabricating the polymer solar cells (PSCs) with using a medium bandgap conjugated polymer PTQ10 as donor. With the increase of the number of methyl substituent on the end groups, from IDTPC without methyl substituent, to IDTPC-Me with one methyl substituent and to IDTPC-DMe with two methyl substituents, open circuit voltage (Voc) increased while the short-circuit current (Jsc) and fill factor (FF) decreased for the corresponding PSCs. As a result, the IDTPC-DMe-based polymer solar cells (PSCs) delivered maximum power conversion efficiency (PCE) of 9.3% with a high Voc of 1.02 V, which is slightly higher than that (9.2%) of the IDTPC-Me-based device. The results demonstrate that the ordinary methyl group as well as the number of methyl has a great impact on electron energy level tuning, intermolecular interaction and intrinsic properties of acceptors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
2. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
3. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
4. Ternary nonfullerene polymer solar cells with 12.16% efficiency by introducing one acceptor with cascading energy level and complementary absorption10.1002/adma.201703005 ↗
5. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
6. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
7. Single-Junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
8. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
9. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
10. Insertion of double bond π-bridges of A-D-A acceptors for high performance near-infrared polymer solar cells10.1039/C7TA07049G ↗
11. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
12. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
13. Side group engineering of small molecular acceptors for high-performance fullerene-free polymer solar cells: thiophene being superior to selenophene10.1002/adfm.201702194 ↗
14. Effect of non-fullerene acceptors' side chains on the morphology and photovoltaic performance of organic solar cells10.1021/acsami.7b09915 ↗
15. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers10.1002/adma.201703973 ↗
16. Ladder-type dithienonaphthalene-based small-molecule acceptors for efficient nonfullerene organic solar cells10.1021/acs.chemmater.7b02887 ↗
17. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
18. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
19. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
20. A fused-ring based electron acceptor for efficient non-fullerene polymer solar cells with small HOMO offset10.1016/j.nanoen.2016.07.019 ↗
21. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with > 1 V open circuit voltages10.1039/C6EE02598F ↗
22. New wide band gap donor for efficient fullerene-free all-small-molecule organic solar cells10.1021/jacs.6b11612 ↗
23. Manipulation of the open-circuit voltage of organic solar cells by desymmetrization of the structure of acceptor-donor-acceptor molecules10.1002/adfm.201101508 ↗
24. IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells10.1039/c3ee24512h ↗
25. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
26. High efficiency small molecular acceptors based on novel O-functionalized ladder-type dipyran building block10.1016/j.nanoen.2017.12.030 ↗
27. Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors10.1039/C8EE01700J ↗
28. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
29. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
30. Enhancing the performance of a fused-ring electron acceptor via extending benzene to naphthalene10.1039/C7TC04520D ↗
31. Molecular consideration for small molecular acceptors based on ladder-type dipyran: influences of O-functionalization and π-bridges10.1002/adfm.201705927 ↗
32. Fused-ring acceptors with asymmetric side chains for high-performance thick-film organic solar cells10.1002/adma.201703527 ↗
33. Significant influence of the methoxyl substitution position on optoelectronic properties and molecular packing of small-molecule electron acceptors for photovoltaic cells10.1002/aenm.201700183 ↗
34. Enhancing the performance of polymer solar cells via core engineering of NIR-absorbing electron acceptors10.1002/adma.201706571 ↗
35. Small-molecule electron acceptors for efficient non-fullerene organic solar cells
36. A halogenation strategy for over 12% efficiency nonfullerene organic solar cells10.1002/aenm.201702870 ↗
37. Nonfullerene acceptor with “Donor-Acceptor combined π-bridge” for organic photovoltaics with large open-circuit voltage10.1021/acsami.8b04541 ↗
38. An alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
39. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
40. The physics of small molecule acceptors for efficient and stable bulk heterojunction solar cells10.1002/aenm.201703298 ↗
41. Aromatic end-capped acceptor effects on molecular stacking and the photovoltaic performance of solution-processable small molecules10.1039/C8TA04102D ↗
42. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
43. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
44. A novel thiophene-fused ending group enabling an excellent small molecule acceptor for high-performance fullerene-free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
45. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
46. Side-chain impact on molecular orientation of organic semiconductor acceptors: high performance nonfullerene polymer solar cells with thick active layer over 400 nm10.1002/aenm.201800856 ↗
47. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
48. Photocurrent generation in polymer-fullerene bulk heterojunctions10.1103/PhysRevLett.93.216601 ↗
49. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
50. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
51. Efficient ternary polymer solar cells with two well-compatible donors and one ultranarrow bandgap nonfullerene acceptor10.1002/aenm.201702854 ↗
52. Determining the role of polymer molecular weight for high-performance all-polymer solar cells: its effect on polymer aggregation and phase separation10.1021/ja5123182 ↗
53. Control of miscibility and aggregation via the material design and coating process for high-performance polymer blend solar cells10.1002/adma.201303170 ↗
54. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗