Enhanced photovoltaic properties of di(dodecylthiophene)-alt-2,3-di(3-octoxylphenyl)-5,8-dithieno[3,2-b]thiophene 6,7-difluoroquinoxaline copolymer by fluorination
Source abstract
Abstract
Abstract A novel di(dodecylthiophene)- alt -2,3-di(3-octoxylphenyl)-5,8-dithieno[3,2- b ]thiophene-6,7-difluoroquinoxaline copolymer (PBT-TTQ-F) and its counterpart of PBT-TTQ-H without the substituted fluorine atom were designed and synthesized. Significant effect of the attaching fluorine atoms in the polymer backbone on photovoltaic properties of copolymers was observed. In the optimized bulk hetero-junction polymer solar cells with a structure of ITO/PEDOT: PSS/copolymers: PC 71 BM (1:2, w/w )/Ca/Al, PBT-TTQ-F exhibited a higher power conversion efficiency (PCE) of 3.05% with a short-circuit current ( J sc ) of 9.48 mA/cm 2 and a fill factor ( FF ) of 48.6% under an illumination of AM 1.5, 100 mW/cm 2 . The PCE, J sc and FF values are 1.2–1.7 times higher than those of the PBT-TTQ-H-based devices. Our results demonstrated that photovoltaic properties could be significantly enhanced by copolymeric fluorination in PCSc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Rational design of high performance conjugated polymers fo organic solar cells10.1021/ma201648t ↗
3. Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
4. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Research progress on polymer heterojunction solar cells10.1016/j.solmat.2011.10.003 ↗
7. Polymer solar cells: recent development and possible routes for improvement in the performance10.1016/j.solmat.2009.10.005 ↗
8. Donor–acceptor type low band gap polymers: polysquaraines and related systems10.1039/B204251G ↗
9. Side-chain architectures of 2,7-carbazole and quinoxaline-based polymers for efficient polymer solar cells10.1021/ma102783d ↗
10. Synthesis and photovoltaic performances of benzo[1,2-b:4,5-b′]dithiophene-alt-2,3-diphenylquino-xaline copolymers pending functional groups in phenyl rings10.1002/pola.26477 ↗
11. Development of naphtha-lene and quinoxaline-based donor–acceptor conjugated copolymers for delivering high open-circuit voltage in photovoltaic devices10.1002/pola.26567 ↗
12. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
13. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells10.1021/ja1112595 ↗
14. Increased open circuit voltage in a fluorinated quinoxaline-based alternating conjugated polymer10.1039/C2PY20798B ↗
15. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7% efficiency10.1002/anie.201005451 ↗
16. Effect of fluorination on the properties of a donor–acceptor copolymer for use in photo-voltaic cells and transistors10.1021/cm301910t ↗
17. Novel benzo[1,2-b:4,5-b′] dithiophene-benzothiadiazole derivatives with variable side chains for high-performance solar cells10.1002/adma.201101933 ↗
18. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells10.1021/ja406220a ↗
19. Isoindigo fluorination to enhance photovoltaic performance of donor–acceptor conjugated copolymers10.1039/C3CC47677D ↗
20. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
21. Fluorine substitution enhanced photovoltaic performance of a D–A1–D–A2 copolymer10.1039/c3cc44931a ↗
22. Improved photovoltaic performance of two-dimensional low band-gap conjugated polymers with thieno[3,2-b]thiophene and diketopyrrolo-pyrrole units by altering pendent position of conjugated side chain10.1016/j.dyepig.2014.04.041 ↗
23. Synthesis and characterization of benzodithiophene–isoindigo polymers for solar cells10.1039/C1JM14940G ↗
24. Synthesis and applications of difluorobenzothiadiazole based conjugated polymers for organic photovoltaics10.1039/c0jm04166a ↗
25. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated Polymers for solar cell applications10.1002/adma.201004554 ↗
26. Silaindacenodithiophene-based low band gap polymers – the effect of fluorine substitution on device performances and film morphologies10.1002/adfm.201102941 ↗
27. Synthesis and photovoltaic properties of a D–A copolymer of dithienosilole and fluorinated-benzotriazole10.1039/C2PY20982A ↗
28. Improved efficiency of solution processed small molecules organic solar cells using thermal annealing10.1016/j.orgel.2013.03.006 ↗