Elevated photovoltaic performance of A-A′-A type built-in vinylene fused perylenediimide-based dimeric acceptors enabled by monofluorinating middle benzo[c][1,2,5]thiadiazole linker
Source abstract
Abstract
Acceptor-acceptor′-acceptor (A-A′-A) type perylene diimide (PDI)-based non-fullerene electron acceptors (NFEAs) have gained increasing attention. However, exploring the built-in vinylene fused perylene diimide (FPDI)-based acceptors still met the challenge. In this contribution, two A-A′-A type FPDI-based dimeric acceptors, DTBT-(FPDI-HD)2 and DTFBT-(FPDI-HD)2, featuring two vinylene-bridge cored FPDI-HD moieties with four 2-hexyldecyl (HD) flexible chains at the imide position as two wings, were designed and developed. Two studied FPDI-based acceptors owned the excellent solution state photostability and the significantly different absorption profile with unfused counterpart DTBT-(PDI-HD)2. Monofluorinating the central electron-deficient linker gave rise to the slightly red-shifted absorption with 0.78 time increased absorption coefficient, stronger molecular stacking, slightly up-shifted ELUMO and the larger natural dipole moment. Accordingly, monofluorination made PTB7-Th:DTFBT-(FPDI-HD)2-based device acquire the 0.01 V increased VOC from 0.71 V to 0.72 V, the 8.31% improved JSC from 10.83 mA cm‐2 to 11.73 mA cm‐2 and the 5.49% improved FF from 60.63% to 63.96%, collectively contributing to the 15.67% elevated PCE from 4.66% 5.39%. This improvement was mainly due to the raised ELUMO, the improved absorption, 3.25-times elevated electron mobility, the suppressed charge recombination and more advantageous morphology as result of incorporating one large electronegative fluorine atom into central electron-deficient benzothiadiazole linker. Furthermore, in comparison with the unfused analogue DTBT-(PDI-HD)2, vinylene-fusion strategy made DTBT-(FPDI-HD)2 obtain the 3.52-time increased PCE from 1.03% to 4.66%. These findings suggested that not only vinylene fusion strategy could improve the absorption and charge mobility by enlarging the π-conjugated system, but also monofluorinating the central linker strategy could affect the absorption, aggregation, energy level, molecular configuration, aimed at achieving the elevated photovoltaic performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Synthesis and Properties of Aromatic Compounds · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Advances in stretchable organic photovoltaics: flexible transparent electrodes and deformable active layer design10.1002/adma.202311170 ↗
2. Recent progress in flexible-wearable solar cells for self-powered electronic devices10.1039/C9EE03046H ↗
3. Semi-transparent organic photovoltaics10.1039/D3CS00233K ↗
4. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
5. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
6. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
7. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
8. A vinylene-bridged perylenediimide- based polymeric acceptor enabling efficient all-polymer solar cells processed under ambient conditions10.1002/adma.201602387 ↗
9. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
10. Giant rylene imide-based electron acceptors for organic photovoltaics10.1021/acs.accounts.0c00677 ↗
11. Progress in perylene diimides for organic solar cell applications10.1039/D1RA08484D ↗
12. Perylene-diimide derived organic photovoltaic materials10.1007/s11426-021-1171-4 ↗
13. Perylene-diimide for organic solar cells: current scenario and prospects in molecular geometric, functionalization, and optoelectronic properties10.1039/D3TA04925F ↗
14. Recent advancements in perylene diimide as an electron acceptor in organic solar cells10.1039/D3TC04054B ↗
15. A perylene diimide- containing acceptor enables high fill factor in organic solar cells10.1039/D0CC04297H ↗
16. Achieving 20.8% organic solar cells via additive-assisted layer-by-layer fabrication with bulk p-i-n structure and improved optical management10.1016/j.joule.2024.08.001 ↗
17. Tuning of the polymeric nanofibril geometry via side-chain interaction toward 20.1% efficiency of organic solar cells10.1021/jacs.4c15266 ↗
18. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
19. Efficient organic solar cells based on non-fullerene acceptors with two planar thiophene-fused perylene diimide units10.1021/acsami.9b22927 ↗
20. Fusion or non-fusion of quasi-two-dimensional fused perylene diimide acceptors: the importance of molecular geometry for fullerene-free organic solar cells10.1039/C9TA10174H ↗
21. Boosting solar cell performance during highly thermo- and photo-stable asymmetric perylene diimide dimeric acceptors by selenium-annulation at the outside bay position10.1039/D4TC01986E ↗
22. Synthesis and properties of ethylene-annulated di(perylene diimides)10.1021/ol302434y ↗
23. Helical ribbons for molecular electronics10.1021/ja503533y ↗
24. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
25. Spiro-fused perylene diimide arrays10.1021/jacs.7b09140 ↗
26. Asymmetrical vs symmetrical selenophene-annulated fused perylenediimide acceptors for efficient non-fullerene polymer solar cells10.1021/acsaem.8b01484 ↗
27. Novel star-shaped helical perylene diimide electron acceptors for efficient additive-free nonfullerene organic solar cells10.1021/acsami.8b06126 ↗
28. Seleno twisted benzodiperylenediimides: facile synthesis and excellent electron acceptors for additive-free organic solar cells10.1039/C8CC09367A ↗
29. Fused perylene diimide-based polymeric acceptors for all-polymer solar cells with high open-circuit voltage10.1039/D2TC05248B ↗
30. Thiophene-fused perylenediimide-based polymer acceptors for high-performance all-polymer solar cells10.1021/acs.macromol.0c02558 ↗
31. Conjugated polymer acceptors based on fused perylene bisimides with twisted backbone for non-fullerene solar cells10.1039/C7PY00444C ↗
32. Fused perylene diimide-based polymeric acceptors with different π-conjugation and molecular conformation in all polymer solar cells10.1016/j.dyepig.2022.110462 ↗
33. Extended π-conjugated perylene diimide dimers toward efficient organic solar cells10.1016/j.dyepig.2020.108736 ↗
34. A perylene diimide electron acceptor with a triphenylamine core: promoting photovoltaic performance via hot spin-coating10.1039/C9TC05713G ↗
35. Fused perylenediimide dimer as nonfullerene acceptor for high-performance organic solar cells10.1016/j.dyepig.2021.109269 ↗
36. Structural symmetry-breaking of a perylene diimide acceptor at the N-position for enhanced photovoltaic performance10.1039/D2NJ01429G ↗
37. Unfused vs fused thienoazacoronene-cored perylene diimide oligomer based acceptors for non-fullerene organic solar cells10.1016/j.dyepig.2021.109833 ↗
38. π-Extension, selenium incorporation, and trimerization: “Three in One” for efficient perylene diimide oligomer-based organic solar cells10.1021/acsami.9b21929 ↗
39. Simply complex: the efficient synthesis of an intricate molecular acceptor for high-performance air-processed and air-tested fullerene-free organic solar cells10.1021/acs.chemmater.6b04862 ↗
40. Highly thermo- and photo-stable acceptor-acceptor′-acceptor type perylenediimide dimeric acceptors: role of monofluorinating the central benzo[c][1,2,5]thiadiazole linking core
41. Acceptor-acceptor′-acceptor type N-annulated perylenediimide dimeric acceptors at the outside-bay position: synthesis and role of asymmetric 4,7-di(thien-2-yl)-5-fluoro- benzothiadiazole linker10.1016/j.optmat.2024.116386 ↗
42. A-A'-A structured methoxy-modified perylenediimide dimeric acceptors at the outside-bay position: synthesis, spectroscopic property and photovoltaic application
43. A perylenediimide dimer containing an asymmetric π-bridge and its fused derivative for fullerene-free organic solar cells10.1039/C8TC00089A ↗
44. Role of the conjugation length of the central linker in asymmetric perylene diimide dimeric acceptors10.1039/D5CP04573H ↗
45. Effect of ether chain length in the perylenediimide-based dimeric acceptors with asymmetric 6-(thien-2-yl)benzo[b]thiophene linker10.1016/j.jphotochem.2025.116589 ↗
46. Asymmetric perylenediimide-based dimeric acceptor for organic solar cells: synthesis and effect of monofluorination10.1016/j.dyepig.2025.113448 ↗
47. Impact of fluorination on photovoltaic performance in high thermo- and photo-stability perylene diimide-based nonfullerene small molecular acceptors10.1016/j.optmat.2021.111593 ↗
48. Unraveling the origin of improved photovoltaic performance in acceptor-acceptor-structured perylene-diimide-based polymeric acceptors through partially fluorinating benzo[c][1,2,5]thiadiazole10.1039/D3TC00696D ↗
49. Stille polycondensation for synthesis of functional materials10.1021/cr100320w ↗
50. Improved performance of all-polymer solar cells enabled by naphthodiperylenetetraimide-based polymer acceptor10.1002/adma.201700309 ↗
51. Donor-acceptor type built-in vinylene fused perylene diimide-based polymeric acceptors: synthesis and role of electron-rich moiety10.1016/j.polymer.2026.129887 ↗
52. Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells10.1021/ja201131h ↗
53. Effects of alkyl side chain length of low bandgap naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole-based copolymers on the optoelectronic properties of polymer solar cells10.1002/pola.29166 ↗
54. Efficient two layer LEDs on a polymer blend basis10.1002/adma.19950070608 ↗
55. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
56. Frisch · 2016
57. Alkoxyl side chain substituted thieno[3,4-c]pyrrole-4,6-dione to enhance photovoltaic performance with low steric hindrance and high dipole moment10.1021/acs.macromol.6b00927 ↗
58. Outside-bay methoxy-modified perylenediimide dimeric acceptors: synthesis and importance of central vinylene linker
59. Naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole-based conjugated polymers consisting of oligothiophenes for efficient polymer solar cells10.1016/j.polymer.2017.06.023 ↗
60. Enhanced organic photovoltaic performance through modulating vertical composition distribution and promoting crystallinity of the photoactive layer by diphenyl sulfide additives10.1021/acsami.8b20466 ↗
61. Self-doping n-type polymer as a cathode interface layer enables efficient organic solar cells by increasing built-in electric field and boosting interface contact10.1039/C9TC03506K ↗
62. Highly photostable N-annulated perylene-diimide-based dimeric acceptors: synthesis and role of linking core10.1016/j.dyepig.2024.112038 ↗
63. Miscibility control by tuning electrostatic interactions in bulk heterojunction for efficient organic solar cells10.1021/acsmaterialslett.1c00328 ↗
64. Insights into excitonic dynamics of terpolymer-based high-efficiency nonfullerene polymer solar cells: enhancing the yield of charge separation states10.1021/acsami.9b20364 ↗
65. Morphology optimization of photoactive layers in organic solar cells
66. Over 19% efficiency organic solar cells by regulating multidimensional intermolecular interactions10.1002/adma.202208986 ↗