journal article·2022-01

Improved photovoltaic properties of copolymer donors by regulating alkyl and alkylsilyl side chains

Wenjing Xu, Miao Zi, Min Zhang, Ruofei Hao, Ping Shen, Bin Zhao, Songting Tan

Dyes and Pigments· Volume 197
Publisher page

Abstract

Abstract By changing the ratio of alkyl and tripropylsilyl side chain of the donor unit, a series of copolymer donor materials, named PBT1, PBT10Si, PBT20Si, PBT30Si and PBDB-Si, are synthesized and applied in polymer solar cells (PSCs). All copolymers exhibit complementary absorption spectra and matched energy levels with small molecular acceptor Y6. Grazing incidence wide angle X-ray scattering (GIWAXS) measurements demonstrate that all copolymer pure films and blend films show distinct face-on orientations. Whereas, the blend film based on PBT20Si:Y6 manifests appropriate phase separation and less bimolecular recombination, which is in favor of effective exciton disintegration and charge transfer. As a result, the PBT20Si-based device exhibits a relatively high hole mobility (μh) value of 4.99 × 10−4 cm2 V−1 s−1, and obtains the highest power conversion efficiency (PCE) of 13.06%. These results indicate that the moderate introduction of tripropylsilyl side chains into polymer donors can improve the molecular aggregation and suppress bimolecular recombination of the photoactive layer, which is an effective strategy worthy of further research to promote the device performances.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Molecular understanding of organic solar cells: the challenges10.1021/ar900099h ↗
2. Organic photovoltaics: a chemical approach10.1039/c003088k ↗
3. Non-conjugated polymers as thickness-insensitive electron transport materials in high-performance inverted organic solar cells10.1016/j.jechem.2019.12.011 ↗
4. Effects of monohalogenated terminal units of non-fullerene acceptors on molecular aggregation and photovoltaic performance10.1016/j.solener.2020.07.100 ↗
5. Simultaneously improving the photovoltaic parameters of organic solar cells via isomerization of benzo[b]benzo[4,5]thieno[2,3-d]thiophene-based octacyclic non-fullerene acceptors10.1039/D0TA00451K ↗
6. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
7. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
8. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
9. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
10. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
11. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
12. Additive-free non-fullerene organic solar cells with random copolymers as donors over 9% power conversion efficiency10.1016/j.cclet.2019.04.029 ↗
13. Random polymer donor for high-performance polymer solar cells with efficiency over 14%10.1021/acsami.9b14133 ↗
14. Synthesis and photovoltaic properties of the copolymers based on carbazole with tetrathiophene porphyrin side chains linked by a flexible alkyl-interval10.1002/cjoc.201700804 ↗
15. Subtle side-chain engineering of random terpolymers for high-performance organic solar cells10.1021/acs.chemmater.8b00510 ↗
16. Improved performance of non-fullerene polymer solar cells using wide-bandgap random terpolymers10.1016/j.orgel.2018.03.005 ↗
17. Improved photovoltaic properties of PM6-based terpolymer donors containing benzothiadiazole with a siloxane-terminated side chain10.1039/D0PY00890G ↗
18. Synthesis and properties of dithienometallole-pyridinochalcogenadiazole alternate polymers10.1038/pj.2013.13 ↗
19. Synthesis and characterization of copolymers based on benzotriazoles and different atom-bridged dithiophenes for efficient solar cells10.1039/c3py21099e ↗
20. Synthesis and applications of cyano-vinylene-based polymers containing cyclopentadithiophene and dithienosilole units for photovoltaic cells10.1002/pola.24779 ↗
21. The enhanced performance of fluorinated quinoxaline-containing polymers by replacing carbon with silicon bridging atoms on the dithiophene donor skeleton10.1039/C4PY01622J ↗
22. Conjugated oligomers and polymers containing dithienosilole units10.1002/macp.200900180 ↗
23. Benzobis(silolothiophene)-based low bandgap polymers for efficient polymer solar cells10.1021/cm1020228 ↗
24. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
25. Effect of alkylsilyl side-chain structure on photovoltaic properties of conjugated polymer donors10.1002/aenm.201702324 ↗
26. Impact of P3HT regioregularity and molecular weight on the efficiency and stability of perovskite solar cells10.1021/acssuschemeng.0c09015 ↗
27. Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells10.1002/adma.200702438 ↗
28. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
29. A facile method to fine-tune polymer aggregation properties and blend morphology of polymer solar cells using donor polymers with randomly distributed alkyl chains10.1002/aenm.201701895 ↗
30. Tuning aggregation behavior of polymer donor via molecular-weight control for achieving 17.1% efficiency inverted polymer solar cells10.1002/cjoc.202100112 ↗
31. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
32. Isoindigo-based conjugated polymer for high-performance organic solar cell with a high VOC of 1.06 V as processed from non-halogenated solvent10.1016/j.dyepig.2018.09.048 ↗
33. Bromination: an alternative strategy for non-Fullerene small molecule acceptors