Spirobifluorene-based non-fullerene acceptors for the environmentally benign process
Source abstract
Abstract
Abstract Spirobifluorene based non-fullerene acceptors (NFAs) having meta-ethylhexyl oxy (m-OEh) substituents (PBDB-T: spiro-bridged NFAs) were synthesized. The orthogonal molecular structure of the m-OEh-substituted spirobifluorene with different end groups provided high solubility and kept the stable morphology between donor-acceptor. Organic Photovoltaic (OPV) device performance was not significantly affected by switching the processing solvent from a chlorinated solvent to an environmentally benign solvent, because suitable morphology and crystallinity were retained. The ITO/ZnO/PBDB-T:spiro-bridged NFA/MoOx/Ag OPV devices prepared using a chlorobenzene as the processing solvent displayed maximum efficiency in the range of 6.44–5.78%, while the devices made using xylene as the processing solvent had a lower maximum efficiency ranging from 6.14–4.66%. The OPV performance of the devices made using chlorobenzene decreased in the order of sp-mOEh-ITIC > sp-mOEh-ITIC-M > sp-mOEh-ITIC-F > sp-mOEh-ITIC-Cl because an electron donating end group increased open-circuit voltage (Voc), while the electron withdrawing end group increased the short-circuit current density (Jsc). Although the OPV performance of the four spiro-bridged derivatives by xylene was showed to be similar order of that by chlorobenzene solvent processing, the efficiency drop from chlorobenzene solvent to xylene solvent showed following order sp-mOEh-ITIC
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Role of renewable energy sources in environmental protection, A review10.1016/j.rser.2010.11.037 ↗
2. End-group tuning of DTBDT-based small molecules for organic photovoltaics10.1016/j.dyepig.2018.04.026 ↗
3. 5,10- A novel small molecule based on dithienophosphole oxide for bulk heterojunction solar cells without pre- or post-treatments10.1016/j.dyepig.2017.04.007 ↗
4. New conjugated polymers for plastic solar cells10.1039/c1ee01072g ↗
5. Effects of backbone planarity and tightly packed alkyl chains in the donor−acceptor polymers for high photostability10.1021/acs.macromol.6b01580 ↗
6. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
7. Understanding Structure−Property relationships in all-small-molecule solar cells incorporating a fullerene or nonfullerene acceptor10.1021/acsami.8b14020 ↗
8. Effective molecular engineering approach for employing a halogen-free solvent for the fabrication of solution-processed small-molecule solar cells10.1021/acsami.8b14888 ↗
9. Molecular design through computational simulation on the benzo[2,1-b3,4-b′]dithiophene-based highly ordered donor material for efficient polymer solar cells
10. A 3-Fluoro-4-hexylthiophene-Based wide bandgap donor polymer for 10.9% efficiency eco-friendly nonfullerene organic solar cells10.1002/smll.201805321 ↗
11. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
12. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
13. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
14. Flexible, highly efficient all-polymer solar cells10.1038/ncomms9547 ↗
15. Designing efficient non‐fullerene acceptors by tailoring extended fused‐rings with electron‐deficient groups10.1002/aenm.201501063 ↗
16. Ternary‐blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
17. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
18. Energy-level modulation of non-fullerene acceptors to achieve high-efficiency polymer solar cells at a diminished energy offset10.1039/C7TA01554B ↗
19. Small-molecule electron acceptors for efficient non-fullerene organic solar cells10.3389/fchem.2018.00414 ↗
20. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
21. A simple small molecule as an acceptor for fullerene-free organic solar cells with efficiency near 8%10.1039/C6TA04358E ↗
22. Polymer acceptor based on double B←N bridged bipyridine (BNBP) unit for high-efficiency all-polymer solar cells10.1002/adma.201601205 ↗
23. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
24. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
25. Efficient charge transfer and fine-tuned energy level alignment in a thf- processed fullerene- free organic solar cell with 11.3% efficiency10.1002/adma.201604241 ↗
26. Green solvent-processed efficient non-fullerene organic solar cells enabled by low-bandgap copolymer donors with EDOT side chains10.1039/C8TA10882J ↗
27. High efficiency all-polymer solar cells realized by synergistic effect between polymer side-chain structure and solvent additive10.1039/C4TA06648K ↗
28. Realizing over 13% efficiency in green-solvent processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers
29. Achieving thickness-insensitive morphology of the photoactive layer for printable organic photovoltaic cells via side chain engineering in nonfullerene acceptors10.1002/aenm.201900044 ↗
30. High-performance organic solar cells based on a non-fullerene acceptor with a spiro core10.1002/asia.201601741 ↗
31. Impact of the solubility of organic semiconductors for solution-processable electronics on the structure formation: a real-time study of morphology and electrical properties10.1039/C7SM02408H ↗
32. Effects of nonradiative losses at charge transfer states and energetic disorder on the open‐circuit voltage in nonfullerene organic solar cells10.1002/adfm.201705659 ↗
33. Halogenated conjugated molecules for ambipolar field-effect transistors and non-fullerene organic solar cells10.1039/C7QM00025A ↗
34. High efficiency near-infrared and semitransparent non-fullerene acceptor organic photovoltaic cells10.1021/jacs.7b11278 ↗
35. Enhancing the performance of the electron acceptor ITIC-Th via tailoring its end groups10.1039/C7QM00547D ↗
36. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
37. High‐efficiency solution‐processed planar perovskite solar cells with a polymer hole transport layer10.1002/aenm.201401855 ↗
38. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
39. Intensity dependence of current-voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
40. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
41. Eco-friendly solvent-processed fullerene-free polymer solar cells with over 9.7% efficiency and long-term performance stability10.1002/aenm.201700566 ↗
42. Organic solar cells processed from green solvents10.1016/j.cogsc.2017.03.007 ↗
43. A general relationship between disorder, aggregation and charge transport in conjugated polymers10.1038/nmat3722 ↗
44. Dimensionality of charge transport in organic field-effect transistors10.1103/PhysRevB.85.235302 ↗
45. Combinatorial study of temperature-dependent nanostructure and electrical conduction of polymer semiconductors: even bimodal orientation can enhance 3D charge transport10.1002/adfm.201601164 ↗
46. Symmetry breaking in side chains leading to mixed orientations and improved charge transport in isoindigo-alt-bithiophene based polymer thin films10.1021/acsami.7b07624 ↗