journal article·2020-03

Positive effects of side-chain fluorination and polymer additive SBS on the enhanced performance of asymmetric-indenothiophene-based polymer solar cells

Chenglin Jiang, Mingzhi Zhao, Xiaofeng Chen, Xiaoyu Li, Haiqiao Wang

Dyes and Pigments· Volume 174
Publisher page

Abstract

Abstract Two new D-A type photovoltaic polymers, namely PITPh-DfQx and PITPhf-DfQx, based on asymmetric indenothiophene (IT) donor units with alkoxyphenyl or fluoroalkoxyphenyl substitutes were designed and synthesized. Effects of the fluorine substitution in the asymmetric IT donor units on the electronic structure, ordering structure, photovoltaic properties, and charge generation and recombination dynamics were investigated. It is found that side-chain fluorination in the asymmetric donor units of the D-A polymers endowed the relative polymers with a deeper HOMO level, higher and more balanced charge mobilites, increased charge dissociation efficiency and reduced bimolecular recombination. As a result, the bulk heterojunction solar cell based on the blend film of PITPhf-DfQx and PC71BM demonstrated an efficiency of 6.10%, whereas the cell efficiency based on PITPh-DfQx was only 3.00%. In addition, a triblock copolymer, poly(styrene-block-butadiene-block-styrene) (SBS), was employed for the first time as a polymer additive into the active layers based on PITPh-DfQx/PC71BM and PITPhf-DfQx/PC71BM devices to promote donor crystallization and tune the extent of phase separation between the donor and acceptor. The presence of SBS obviously improved the molecule packing and induced the crystallization of the two polymers, giving rise to a better phase separation due to enhanced aggregation effect of photovoltaic polymers. Therefore, with a small addition of SBS, the optimal PCE was further increased from 6.10% to 6.60% for PITPhf-DfQx based device and from 3.00% to 5.50% for PITPh-DfQx based device. The positive effects of SBS additive on the performance of photovoltaic polymer/fullerene BHJ solar cells provide a new strategy for developing high performance polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2’, 3’-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
4. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
5. Efficiency of bulk-heterojunction organic solar cells10.1016/j.progpolymsci.2013.05.001 ↗
6. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
7. A new n-type semiconducting molecule with an asymmetric indenothiophene core for a high-performing non-fullerene type organic solar cell10.1039/C7TC00706J ↗
8. A small molecular electron acceptor based on asymmetric hexacyclic core of thieno[1,2-b]indaceno[5,6-b’]thienothiophene for efficient fullerene-free polymer solar cells10.1016/j.scib.2018.05.025 ↗
9. Alkylthienyl substituted asymmetric 2D BDT and DTBT-based polymer solar cells with a power conversion efficiency of 9.2%10.1039/C7TA10247J ↗
10. Asymmetric, efficient π-conjugated organic semiconducting chromophore for bulk-heterojunction organic photovoltaics10.1016/j.dyepig.2017.09.048 ↗
11. Asymmetric electron-donating 4-alkyl-8-alkoxybenzo[1,2-b:4.5-b’]dithiophene unit for use in high-efficiency bulk heterojunction polymer solar cells10.1021/acs.macromol.5b00684 ↗
12. Small molecules with asymmetric 4-alkyl-8-alkoxybenzo[1,2-b:4,5-b’]dithiophene as the central unit for high-performance solar cells with high fill factors10.1021/acs.chemmater.7b00642 ↗
13. Asymmetric-indenothiophene-based copolymers for bulk heterojunction solar cells with 9.14% efficiency10.1002/adma.201505957 ↗
14. Indenothiophene-based wide bandgap copolymer for polymer fullerene solar cells with 9.01% efficiency and 1.0 open circuit voltage10.1002/aelm.201600340 ↗
15. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
16. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
17. Enhanced performance of organic solar cells with increased end group dipole moment in indacenodithieno[3,2-b]thiophene-based molecules10.1002/adfm.201501600 ↗
18. Multifluorination toward high-mobility ambipolar and unipolar n-type donor-acceptor conjugated polymers based on isoindigo10.1002/adma.201606217 ↗
19. Fluorinated thieno[2’,3’:4,5]benzo[1,2-d][1,2,3]triazole: new acceptor unit to construct polymer donors10.1021/acsomega.8b02053 ↗
20. Face-on orientation of fluorinated polymers conveyed by long alkyl chains: a prerequisite for high photovoltaic performances10.1039/C8TA04127J ↗
21. Fluorination as an effective tool to increase the photovoltaic performance of indacenodithiophene-alt-quinoxaline based wide-bandgap copolymers10.1016/j.orgel.2016.03.012 ↗
22. The crucial role of intermolecular pi-pi interactions in A-D-A-type electron acceptors and their effective modulation10.1039/C7TA10461H ↗
23. Alternating polymers based on fluorinated alkoxyphenyl-substituted benzo[1,2-b:4,5-b’] dithiophene and isoindigo derivatives for polymer solar cells10.1016/j.dyepig.2017.07.024 ↗
24. Isoindigo-dicyanobithiophene-based copolymer for high performance polymer-fullerene solar cells reaching 1.06 V open circuit voltage and 8.36% power conversion efficiency10.1021/acsmacrolett.7b00547 ↗
25. Positional effects of fluorination in conjugated side chains on photovoltaic properties of donor-acceptor copolymers10.1039/C6CC06646A ↗
26. Fluorinated and alkylthiolated polymeric donors enable both efficient fullerene and nonfullerene polymer solar cells10.1002/adfm.201706404 ↗
27. Comparison of two D-A type polymers with each being fluorinated on D and A unit for high performance solar cells10.1002/adfm.201402210 ↗
28. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
29. Semi-crystalline photovoltaic polymers with efficiency exceeding 9% in a similar to 300 nm thick conventional single-cell device10.1039/C4EE01529K ↗
30. Conjugated polymers based on benzodithiophene and fluorinated quinoxaline for bulk heterojunction solar cells: thiophene versus thieno[3,2-b]-thiophene as pi-conjugated spacers10.1039/c3py01519j ↗
31. Fluorine substitution enhanced photovoltaic performance of a D-A(1)-D-A(2) copolymer10.1039/c3cc44931a ↗
32. High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants10.1016/j.nanoen.2018.01.012 ↗
33. Effects of exciton polarity in charge-transfer polymer/PCBM bulk heterojunction films10.1021/jz5005957 ↗
34. Significant improved performance of photovoltaic cells made from a partially fluorinated cyclopentadithiophene/benzothiadiazole conjugated polymer10.1021/ma3009178 ↗
35. Structural order in bulk heterojunction films prepared with solvent additives10.1002/adma.201003690 ↗
36. Effect of solvent mixture on the nanoscale phase separation in polymer solar cells10.1002/adfm.200701459 ↗
37. Improving device efficiency of polymer/fullerene bulk heterojunction solar cells through enhanced crystallinity and reduced grain boundaries induced by solvent additives10.1002/adma.201101274 ↗
38. Controlling morphology in polymer-fullerene mixtures10.1002/adma.200701519 ↗
39. Efficient poly(3-hexylthiophene)-based bulk heterojunction solar cells fabricated by an annealing-free approach10.1021/jp804909a ↗
40. Efficiency enhancement of polymer solar cells based on poly(3-hexylthiophene)/indene-C70 bisaddut via methylthiophene additive10.1002/aenm.201100378 ↗
41. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
42. Transition from solution to the solid state in polymer solar cells cast from mixed solvents10.1021/ma801945h ↗
43. Insulating polymer additives in small molecule and polymer photovoltaics: how they are tolerated and their use as potential interlayers10.1039/C7TC00525C ↗
44. High-molecular-weight insulating polymers can improve the performance of molecular solar cells10.1002/adma.201400497 ↗
45. Improved efficiency of DTGe(FBTTh2)2-based solar cells by using macromolecular additives: how macromolecular additives versus small additives influence nanoscale morphology and photovoltaic performance10.1016/j.nanoen.2016.03.026 ↗
46. Integrated effects of two additives on the enhanced performance of PTB7:PC71BM polymer solar cells10.3390/ma9030171 ↗
47. Synergistic impact of solvent and polymer additives on the film formation of small molecule blend films for bulk heterojunction solar cells10.1002/aenm.201501121 ↗
48. A block copolymer enhances the efficiency of small-molecule bulk-heterojunction photovoltaics10.1039/C5TA08932H ↗
49. Roles of interfacial tension in regulating internal organization of low bandgap polymer bulk heterojunction solar cells by polymer additives10.1002/admi.201800435 ↗
50. PS-b-P3HT copolymers as P3HT/PCBM interfacial compatibilizers for high efficiency photovoltaics10.1002/adma.201103361 ↗
51. Relationship among microstructure, linear viscoelastic behavior and mechanical properties of SBS triblock copolymer-compatibilized PP/SAN blend10.1007/s00289-013-1071-4 ↗
52. Modification of poly(styrene-block-butadiene-block-styrene) [SBS] with phosphorus containing fire retardants10.1016/j.eurpolymj.2015.07.015 ↗
53. Selective swelling blends of block copolymers for nanoporous membranes with enhanced permeability and robustness10.1002/polb.24419 ↗