journal article·2022-01

Fluorination of the π-bridge in a polymer skeleton enables a significant improvement in photovoltaic performance

Junxu Liao, Peijin Zheng, Gengbiao Xu, Fubiao Weng, Langxian Zeng, Zhangen Huang, Yongtao Chen, Yu Yang, Jianhao Chen, Zhiwei Qiu, Hongbin Zhao, Yongjun Xu

Dyes and Pigments· Volume 197
Publisher page

Abstract

Abstract An easy and efficient approach for the synthesis of an important photoelectric intermediate 3-fluoro-2-iodithiophene is developed. Therefrom, a polymer J52FF, featuring fluorination of the π-bridges on the backbone and side chains of the classical polymer, J52, is synthesized. J52FF displays a coplanar molecular configuration with the dihedral angles smaller than 2° in skeleton, a low-lying HOMO energy level of −5.62 eV, which is nearly aligned with the acceptor IT-4F, and a broad absorption range from 300 nm to 650 nm. The J52FF:IT-4F (1:0.8) blend shows a strong and complementary spectral absorption, a uniform fibrillar textured morphology and high and balanced charge mobilities. The inverted device based on J52FF:IT-4F blend obtained an encouraging power conversion efficiency (PCE) of 14.83% with the open-circuit voltage (Voc) of 0.90 V, the short circuit current (Jsc) of 23.21 mA cm−2, and the fill factor (FF) of 0.71 under the optimal conditions, which is one of the best PCE value among the ever reported BDT-alt-BTz derivatives or IT-4F based non-fullerene organic solar cells (NF–OSCs). It demonstrates that fluorination of polymer in skeleton is an efficient strategy for obtaining high performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Polymer solar cells10.1038/nphoton.2012.11 ↗
2. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol‐soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
3. Molecular design of photovoltaic materials for polymer solar cells: towards suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
4. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
5. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
6. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
7. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
8. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200903697 ↗
9. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
10. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
11. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
12. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
13. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
14. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
15. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
16. Fused benzothiadiazole: a building block for n-type organic acceptor to achieve high-performance organic solar cells10.1002/adma.201807577 ↗
17. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
18. 14.7% efficiency organic photovoltaic cells enabled by active materials with a large electrostatic potential difference10.1021/jacs.8b12937 ↗
19. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
20. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
21. Single-junction polymer solar cells with 16.35% efficiency enabled by a platinum (II) complexation strategy10.1002/adma.201901872 ↗
22. 18% efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
23. Polymer donors for high-performance non-fullerene organic solar cells10.1002/anie.201806291 ↗
24. High-performance conjugated polymer donor materials for polymer solar cells with narrow-bandgap non-fullerene acceptors10.1039/C9EE02531F ↗
25. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
26. Nonfullerene polymer solar cells based on a main-chain twisted low-bandgap acceptor with power conversion efficiency of 13.2%10.1021/acsenergylett.8b00627 ↗
27. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
28. Nonhalogen solvent-processed polymer solar cells based on chlorine and trialkylsilyl substituted conjugated polymers achieve 12.8% efficiency10.1039/C8TA10662B ↗
29. High-performance non-fullerene polymer solar cells based on fluorine substituted wide bandgap copolymers without extra treatments10.1002/solr.201700020 ↗
30. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
31. The curious case of fluorination of conjugated polymers for solar cells10.1021/acs.accounts.7b00326 ↗
32. Implication of fluorine atom on electronic properties, ordering structures, and photovoltaic performance in naphthobisthiadiazole-based semiconducting polymers10.1021/jacs.6b05418 ↗
33. Fluorinated photovoltaic materials for high-performance organic solar cells10.1002/asia.201900795 ↗
34. Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors10.1063/1.1521244 ↗
35. Quantitative determination of organic semiconductor microstructure from the molecular to device scale10.1021/cr3001109 ↗