Formation, growth and transformations of crystalline phases in solution-cast blends of poly(3-hexylthiopehene) and perylene dicarboximides
Source abstract
Abstract
Abstract In this work we studied the blends of poly(3-hexylthiophene) (P3HT) with 25–75 wt% of either N , N ′-dioctyl-3,4,9,10-perylenedicarboximide (PDIC8) or N , N ′-dioctyl-1,7-dicyano-3,4,9,10-perylenedicarboximide (PDIC8CN2). In our approach we used differential scanning calorimetry, X-ray diffraction and atomic force and scanning electron microscopies to shed light on crystallization of the blends cast from chloroform solutions. Increasing content of PDIC8 in the blends caused a significant decrease in crystallinity index of P3HT. The sizes of crystalline domains of P3HT determined from X-ray diffraction measurements were found, however, independent of PDIC8 content. Addition of PDIC8CN2 caused a slight increase in the crystallinity index of P3HT and, at the weight ratio of P3HT:PDIC8CN2 of (3:1) almost doubled the sizes of P3HT crystals. On the other hand, P3HT caused a significant change in morphology of both the PDI derivatives. It was found that P3HT may promote formation of PDI crystals larger than formed in the pure phases. Additionally, for the P3HT:PDIC8CN2 (1:1) blend we observed P3HT (Form II) crystals grown on PDIC8CN2 crystalline fibers, forming characteristic shish-kebab structures. Directly after the crystallization from solution, the average crystal sizes of both the PDI derivatives in the blends were over 5-fold smaller than in the pure phases. Interestingly, annealing of the blends caused the PDI crystals to grow and form crystalline domains with average sizes larger than those observed in the pure PDI. In order to correlate crystalline structure with electrical properties, the blends were tested using field effect transistors as diagnostic devices. Only in the P3HT:PDIC8 (1:3) blend we observed the ambipolar charge transport expected for the P3HT:PDI systems. Our research indicated that the charge transport was related to crystal morphology and continuity of phases and there was no correlation to the polymer crystallinity determined for the bulk systems.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. The role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
3. Recent progress in the morphology of bulk heterojunction photovoltaics10.1039/c1sm06147j ↗
4. Bloor · 1994
5. Enhanced mobility in P3HT-based OTFTs upon blending with a phenylene–thiophene–thiophene–phenylene small molecule10.1039/C1CC15477J ↗
6. Polythiophene–perylene diimide heterojunction field-effect transistors10.1039/c3tc00562c ↗
7. Self-assembly of perylenediimide based semiconductor on polymer substrate10.1016/j.tsf.2009.08.037 ↗
8. Polythiophene : perylene diimide solar cells–the impact of alkyl-substitution on the photovoltaic performance10.1002/aenm.201000006 ↗
9. Recent progress in n-channel organic thin-film transistors10.1002/adma.200901454 ↗
10. Morphology and field-effect mobility of charge carriers in binary blends of poly(3-hexylthiophene) with poly[2-methoxy-5-(2-ethylhexoxy)-1, 4-phenylenevinylene] and polystyrene10.1021/ma0482314 ↗
11. Growth of polythiophene/perylene tetracarboxydiimide donor/acceptor shish-kebab nanostructures by coupled crystal modification
12. One-step technique for production of bifunctional low molecular semiconductor–polymer composites for flexible OFET applications10.1039/c3tc30163j ↗
13. Crystallization and phase behavior of crystalline syndiotactic 1, 2-polybutadiene/isotactic polypropylene blends in solution-cast thin films10.1016/j.polymer.2006.01.008 ↗
14. Cheremisinoff · 1989
15. Tailoring ultrasound-induced growth of perylene diimide nanowire crystals from solution by modification with poly(3-hexylthiophene)10.1021/nn506795q ↗
16. Schmelzer · 2005
17. Confined crystallization of polymeric materials10.1016/j.progpolymsci.2015.10.007 ↗
18. Structure and electrical properties of polymers with amorphous and crystalline dopants10.1351/pac198456030355 ↗
19. Reiter · 2003
20. High crystallinity and nature of crystal− crystal phase transformations in regioregular poly(3-hexylthiophene)10.1021/ma102205t ↗
21. Different structures and crystallinities of poly(3-hexylthiophene) films prepared from aged solutions10.1016/j.colsurfa.2011.03.003 ↗
22. Graphene nanoribbon blends with P3HT for organic electronics10.1039/C4NR00256C ↗
23. Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly(3-hexylthiophene) in thin-film transistors10.1002/adfm.200400297 ↗
24. Structure and morphology control in thin films of regioregular poly(3-hexylthiophene)10.1002/polb.22310 ↗
25. Cao · 2004
26. Self-Assembly of perylene imide molecules into 1D nanostructures: methods, morphologies, and applications10.1021/acs.chemrev.5b00312 ↗
27. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
28. Ambipolar organic thin film transistors prepared with a one step solution technique10.1016/j.synthmet.2016.05.025 ↗
29. n-Type organic semiconductors in organic electronics10.1002/adma.200903628 ↗
30. Surface-treatment effects on organic thin-film transistors10.1016/j.synthmet.2004.08.034 ↗
31. Real-time investigation of crystallization and phase-segregation dynamics in P3HT: PCBM solar cells during thermal annealing10.1002/adfm.201002076 ↗
32. Effect of solution aging on morphology and electrical characteristics of regioregular P3HT FETs fabricated by spin coating and spray coating10.1016/j.orgel.2011.06.027 ↗
33. High field-effect mobility of low-crystallinity conjugated polymers with localized aggregates10.1021/jacs.6b01046 ↗
34. Experimental evidence that short-range intermolecular aggregation is sufficient for efficient charge transport in conjugated polymers10.1073/pnas.1501381112 ↗