Optoelectronic properties of (Z)-3-(4-(4,5-diphenyl-1H-imidazole-2-yl)phenyl)-2-phenylacrylonitrile films under acid and thermal environments for tuning OLED emission
Source abstract
Abstract
Abstract A systematic study of changes on optoelectronic properties of (Z)-3-(4-(4,5-diphenyl-1H-imidazole-2-yl)phenyl)-2-phenylacrylonitrile (DPimdPPA) based films owing to treatments with acid or temperature, is reported. The DPimdPPA films treated with vapors of HNO3, HCl, or CH3COOH exhibited a hypsochromic shift up to 70 nm as well as an enhancement in the fluorescence quantum yield. Interestingly, a similar behavior was observed when films were thermally treated at temperatures between 100 °C and 240 °C. XRD studies showed that DPimdPPA in powder form is a polycrystalline material, while the as-deposited films were amorphous. However, the treatments with temperature or acid, induced crystallinity in the films. Studies by atomic force microscopy showed that the induced crystallinity modified the film morphology leading to the formation of agglomerates with needle like shape. These changes in fluorescence were used to tune the emission in OLEDs. Notably, devices with pristine DPimdPPA film as well as treated with HNO3 vapor or heated at 240 °C were prepared. The emission with pristine films was warm white with CIE coordinates (0.45, 0.43); with HNO3 treatment it was green with CIE coordinates (0.28, 0.40) and, when treated at 240 °C the emission was greenish-blue with CIE coordinates (0.35, 0.48). Besides, with the treatments the turn-on voltage decreased, and luminous parameters were enhanced; the maximum luminance was about 5400 cd/m2 while the highest luminance efficiency 5.2 lm/W.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Luminescence and Fluorescent Materials · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (72)
Show source-provided references
1. Tuning the singlet-triplet energy gap: a unique approach to efficient photosensitizers with aggregation-induced emission (AIE) characteristics10.1039/C5SC01733E ↗
2. Fluorescent and colorimetric ion probes based on conjugated oligopyrroles10.1039/C4CS00436A ↗
3. Mechanically induced luminescence changes in molecular assemblies10.1038/nchem.411 ↗
4. Multicolor emissions by the synergism of intra/intermolecular slipped π–π stackings of tetraphenylethylene-DiBODIPY conjugate10.1021/acs.chemmater.5b03765 ↗
5. Far-red and near-IR AIE-active fluorescent organic nanoprobes with enhanced tumor-targeting efficacy: shape-specific effects10.1002/anie.201501478 ↗
6. Extensively reversible thermal transformations of a bistable, fluorescence-switchable molecular solid: entry into functional molecular phase-change materials10.1002/anie.201501032 ↗
7. Role of molecular packing in determining solid-state optical properties of π-conjugated materials10.1021/jz200099p ↗
8. Preferential orientation of crystals and its influence on the emission wavelength of acrylonitrile derivatives treated with polar solvents10.1002/crat.201800156 ↗
9. Experimental study and DFT calculation for the strength of intermolecular interactions in schiff base with the phenylarsonic acid scaffold10.1016/j.molstruc.2019.06.073 ↗
10. Experimental and theoretical insights into the optical properties and intermolecular interactions in push‐pull bromide salts
11. A donor–acceptor–donor conjugated molecule: twist intramolecular charge transfer and piezochromic luminescent properties10.1039/c3cc48980a ↗
12. Organic solid-state fluorescence: strategies for generating switchable and tunable fluorescent materials10.1002/cplu.201200073 ↗
13. Remarkable turn-on and color-tuned piezochromic luminescence: mechanically switching intramolecular charge transfer in molecular crystals10.1002/adfm.201501224 ↗
14. Intermolecular interactions in the solid state structures of neutral and N-protonated 5-alkoxymethyl-8-hydroxyquinolines10.1016/j.molstruc.2016.11.090 ↗
15. Luminescent distyrylbenzenes: tailoring molecular structure and crystalline morphology10.1039/c3tc31062k ↗
16. Vapochromic crystals: understanding vapochromism from the perspective of crystal engineering10.1039/C9CS00098D ↗
17. Self-reversible thermofluorochromism of D–A–D triphenylamine derivatives and the effect of molecular conformation and packing10.1039/C7CE01538K ↗
18. Reversible switching emissions of tetraphenylethene derivatives among multiple colors with solvent vapor, mechanical, and thermal stimuli10.1021/jp306908u ↗
19. Remarkable fluorescence change based on the protonation–deprotonation control in organic crystals10.1039/c3cc41171k ↗
20. Halochromic isoquinoline with mechanochromic triphenylamine: smart fluorescent material for rewritable and self-erasable fluorescent platform10.1021/acsami.6b11939 ↗
21. Acid-stimuli-luminescence and carbonyl-proton interaction dependent emission properties of 2,6-biphenyl-4-pyrone crystals10.1021/cg200920d ↗
22. A vapoluminescent Eu-based metallo-supramolecular polymer10.1039/c2cc30972f ↗
23. Multi-stimuli-responsive fluorescence switching of a Donor−Acceptor π-conjugated compound10.1021/jz200140c ↗
24. Hiding and revealing information using the mechanochromic system of a 2,5-dicarbazole-substituted terephthalate derivative10.1039/C8TC01379A ↗
25. Reversible color switching of an organic crystal induced by organic solvent vapors10.1021/cg2010437 ↗
26. Powder structure analysis of vapochromic quinolone antibacterial agent crystals10.1021/acs.cgd.6b00719 ↗
27. A triphenylamine-based benzoxazole derivative as a high-contrast piezofluorochromic material induced by protonation10.1039/C3CC49208G ↗
28. Drastic modulation of stimuli-responsive fluorescence by a subtle structural change of organic fluorophore and polymorphism controlled mechanofluorochromism10.1021/acs.cgd.8b00310 ↗
29. A novel fluorescent sensor based on imidazole derivative for Fe3+ ions10.1016/j.jlumin.2017.08.057 ↗
30. Nonenzymatic electrochemical sensor based on imidazole-functionalized graphene oxide for progesterone detection10.1016/j.bios.2018.04.044 ↗
31. A highly sensitive fluorescent sensor for Zn2+ based on diarylethene with an imidazole unit. Spectrochim10.1016/j.saa.2018.07.014 ↗
32. Novel blue-green emitting NLOphoric triphenylamine-imidazole based donor-π-acceptor compound: solvatochromism, DFT, TD-DFT and non-linear optical studies10.1016/j.saa.2019.117421 ↗
33. Fluorescence spectral studies of some imidazole derivatives10.1016/j.saa.2012.01.030 ↗
34. A phenanthro[9,10-d]Imidazole-based optical sensor for dual-responsive turn-on detection of acidic PH and Cu2+ in chicken blood and living cells10.1016/j.dyepig.2019.107916 ↗
35. Dual-responsive PH sensor based on a phenanthro[9,10-d]Imidazole fluorophore modified by amino diacetate10.1016/j.tetlet.2016.03.046 ↗
36. Solvatochromism and PH effect on the emission of a triphenylimidazole-phenylacrylonitrile derivative: experimental and DFT studies10.1039/C9RA01275C ↗
37. Emergence of white organic light-emitting diodes based on thermally activated delayed fluorescence10.3390/app8020299 ↗
38. Development of high performance OLEDs for general lighting10.1039/c2tc00584k ↗
39. Fabrication of flexible white light-emitting diodes from photoluminescent polymer materials with excellent color quality10.1021/acsami.7b03386 ↗
40. High EQE and high brightness solution‐processed TADF light‐emitting transistors and OLEDs10.1002/adom.202000554 ↗
41. Utilization of multi-heterodonors in thermally activated delayed fluorescence molecules and their high performance bluish-green organic light-emitting diodes10.1021/acsami.9b20020 ↗
42. High-efficiency organic light-emitting diodes with exciplex hosts10.1039/C9TC03092A ↗
43. Orthogonal molecular structure for better host material in blue phosphorescence and larger OLED white lighting panel10.1002/adfm.201403402 ↗
44. Highly efficient exciplex organic light-emitting devices employing a sputtered indium-tin oxide electrode with nano-pinhole morphology10.1039/C7TC03500D ↗
45. Multicolor fluorescence and electroluminescence of an ICT-type organic solid tuned by modulating the accepting nature of the central core10.1039/c3sc51091c ↗
46. An improved experimental determination of external photoluminescence quantum efficiency10.1002/adma.19970090308 ↗
47. A luminescence molecular switch via modulation of PET and ICT processes in DCM system10.1007/s11426-016-0500-2 ↗
48. Synthesis and luminescence properties of novel ferrocene–naphthalimides dyads10.1016/S0022-328X(01)01416-4 ↗
49. The effect of protonation on the optical properties of conjugated fluorene-pyridine copolymers10.1002/macp.200800386 ↗
50. Counterion specificity in the phase behavior of tetradecyldimethylamine oxides at different degrees of protonation10.1016/j.jcis.2006.02.008 ↗
51. Effect of counterion valence on the PH responsiveness of polyamidoamine dendrimer structure10.1063/1.3358349 ↗
52. Topology switching in [32]Heptaphyrins controlled by solvent, protonation, and meso substituents10.1002/chem.201203295 ↗
53. Protonation-induced change in the conformation, crystal structure and property of triarylmethyl carbocation radical10.1016/j.cplett.2016.02.042 ↗
54. Influence of protonation upon the conformations of bipiperidine, bimorpholine, and their derivatives10.1016/j.cplett.2009.02.027 ↗
55. Molecular conformation and packing: their critical roles in the emission performance of mechanochromic fluorescence materials10.1039/C7QM00201G ↗
56. Thermal annealing effect on light emission profile of polyfluorenes containing double bond subunit10.1016/j.orgel.2017.07.026 ↗
57. Tuning the emission color of a single-layer polymer light-emitting diode with a solution-processed external layer10.1016/j.synthmet.2016.10.024 ↗
58. Morphology and chain aggregation dependence of optical gain in thermally annealed films of the conjugated polymer poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylene vinylene]10.1063/1.4811532 ↗
59. Erratum: “effects of thermal annealing on the performance of polymer light emitting diodes”
60. Strongly fluorescent organogel system comprising fibrillar self-assembly of a trifluoromethyl-based cyanostilbene derivative10.1021/ja046215g ↗
61. Axial chirality of donor–donor, donor–acceptor, and tethered 1,1′-binaphthyls: a theoretical revisit with dynamics trajectories10.1021/jp202776g ↗
62. Conformation elucidation of tethered Donor−Acceptor binaphthyls from the anisotropy factor of a charge-transfer band10.1021/jz100901n ↗
63. Experimental and theoretical studies on the chiroptical properties of Donor−Acceptor binaphthyls. Effects of dynamic conformer population on circular dichroism10.1021/jz100574e ↗
64. Pyridine functionalized triphenylamine based fluorophore for solid state fluorescence switching, Fe3+ and picric acid sensing10.1016/j.snb.2016.11.086 ↗
65. Electronic spectra of perylene crystals10.1246/bcsj.47.2376 ↗
66. 1 H‐NMR, photophysical, and PH studies of 4‐(4,5‐diphenyl‐1 H ‐imidazol‐2‐yl)Benzaldehyde through experimental and DFT theoretical analysis
67. Köhler · 2015
68. Luminescence and spectrum variations caused by thermal annealing in undoped and doped polyfluorene OLEDs10.1016/j.sse.2014.07.015 ↗
69. Post-annealing effect on the interface morphology and current efficiency of organic light-emitting diodes10.1016/j.sse.2012.07.016 ↗
70. Aggregation, thermal annealing, and hosting effects on performances of an acridan-based TADF emitter10.1016/j.orgel.2018.09.002 ↗
71. Effect of thermal annealing on structural, linear and nonlinear optical properties of 1, 4, 5, 8-naphthalene tetracarboxylic dianhydride thin films10.1016/j.molstruc.2018.10.058 ↗
72. On the correlation between morphology and electronic properties of copper phthalocyanine (CuPc) thin films10.1016/S0040-6090(03)00511-X ↗