Low-cost donors based on a dicarboxylic ester side-chain substituted thieno[3,2b]thiophene unit for efficient polymer solar cells
Source abstract
Abstract
Abstract In this article, both novel wide bandgap (WBG) copolymers, namely, PBTTBO-BT, and PBTTBO-TVT, based on a dicarboxylic ester side-chains substituted thieno[3,2-b]thiophene (BTTBO) unit as weak electron-deficient building skeleton and a simple and low-cost 2,2′-bithiophene (BT) or (E)-1,2- di(thiophen-2-yl)ethylene (TVT) as electron-rich donor unit, were successfully synthesized and applicated as the photovoltaic donor materials for fullerene polymer solar cells (PSCs). With the replacement of BT with TVT group, the resulting copolymer PBTTBO-TVT shows higher carrier mobility, broad absorption and better morphologies of blend films, which is mainly ascribed to better coplanarity and π-conjugated system of TVT unit. Under an optimized blend ratio of copolymer:PC71BM (1:1, w/w), the PC71BM-based PSCs with PBTTBO-TVT as donor, obtained a high power conversion efficiency (PCE) of 7.05%, noticeably higher than that of the PCE of 5.78% in device based on PBTTBO-BT:PC71BM, which is owing to an increased short circuit current density (Jsc) of 12.96 mA cm−2 and fill factor (FF) of 66.34% simultaneously. In considering the merits of low-cost and high efficiency, this type of copolymer should be a hopeful donor material for efficient fullerene-PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. 25th Anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
3. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
4. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
5. Recent advances in organic photovoltaics:device structure and optical engineering optimization on the nanoscale10.1002/smll.201502775 ↗
6. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
7. Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
8. Low boiling point solvent additives enable vacuum drying-free processed 230 nm thick PTB7-Th:PC71BM active layers with more than 10% power conversion efficiency10.1039/C8TA09259A ↗
9. Alkyl chain tuning of small molecule acceptors or efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
10. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
11. Single-junction organic photovoltaic cells with approaching 18% efficiency10.1002/adma.201908205 ↗
12. Thioacetone copolymer donor gifts organic solar cells a 16.72%efficiency10.1016/j.scib.2019.10.002 ↗
13. Recent development of push-pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
14. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
15. Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells10.1039/C4CS00250D ↗
16. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
17. Recent developments in graphene/polymer nanocomposites for application in polymer solar cells10.3390/polym10020217 ↗
18. Small molecules based on benzo[1,2-b:4,5-b’]dithiopheneunit for high-performance solution-processed organic solar cells10.1021/ja306865z ↗
19. Significantly improved photovoltaic performance of the triangular-spiral TPA(DPP-PN)3 by appending planar phenanthrene units into the molecular terminals10.1039/C4TA03688C ↗
20. Controlling the interchain packing and photovoltaic properties via fluorine substitution in terpolymers based on benzo[1,2-c:4,5-c']dithiophene-4,8-dione and benzothiadiazole units10.1016/j.polymer.2018.06.038 ↗
21. Head-to-head linkage containing bithiophene-based polymeric semiconductors for highly efficient polymer solar cells10.1002/adma.201603112 ↗
22. Synthesis, characterization, aggregation-induced emission, solvatochromism and mechanochromism of fluorinated benzothiadiazole bonded to tetraphenylethenes10.1039/C8RA01448E ↗
23. Regio-asymmetric polymers based on fluorinated benzothiadiazole- benzodithiophene for polymer solar cells with a high open-circuit voltage10.1039/C9NJ00001A ↗
24. Effect of alkylsilyl side-chain structure on photovoltaic properties of conjugated polymer donors10.1002/aenm.201702324 ↗
25. Effect of Side-chain engineering of bithienylbenzo- dithiophene-alt-fluorobenzotriazole-based copolymers on the thermal stability and photovoltaic performance of polymer solar cells10.1021/acs.macromol.8b01036 ↗
26. Nonhalogen solvent-processed polymer solar cells based on chlorine and trialkylsilyl substituted conjugated polymers achieve 12.8% efficiency10.1039/C8TA10662B ↗
27. Rational design of asymmetric benzodithiophene based photovoltaic polymers for efficient solar cells10.1039/C7TA09736K ↗
28. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
29. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
30. Enhancing the photovoltaic properties of low bandgap terpolymers based on benzodithiophene and phenanthrophenazine by introducing different second acceptor units10.1039/C5PY01985K ↗
31. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
32. Optimizing the conjugated side chains of quinoxaline based polymers for nonfullerene solar cells with 10.5% efficiency10.1039/C7TA10262C ↗
33. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
34. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells10.1021/ja406220a ↗
35. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
36. Downwards tuning the HOMO level of polythiophene by carboxylate substitution for high open-circuit-voltage polymer solar cells10.1039/c1py00327e ↗
37. Molecular design of a wide-band-gap conjugated polymer for efficient fullerene-free polymer solar cells10.1039/C6EE03489F ↗
38. Mapping nonfullerene acceptors with a novel wide bandgap polymer for high performance polymer solar cells10.1002/aenm.201801214 ↗
39. Thermal behavior of dicarboxylic ester bithiophene polymers exhibiting a high open-circuit voltage10.1039/C7TC04322H ↗
40. Highly crystalline low band gap polymer based on thieno[3,4-c]pyrrole-4,6-dione for high-performance polymer solar cells with a >400 nm thick active layer10.1021/acsami.5b03446 ↗
41. π-Conjugated polymers derived from2,5-bis-(2-decyltetradecyl)-3,6-di(selenophen-2-yl)-pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione for high-performance thin film transistors10.1039/C4PY01536C ↗
42. n-Type conjugated polymers based on 3,3’-dicyano-2,2’-bithiophene: synthesis and semiconducting properties10.1039/C8TC03725F ↗
43. Photovoltaic properties of a new quinoxaline-based copolymer with thieno[3,2-b]thiophene side chain for organic photovoltaic cell applications10.1016/j.dyepig.2016.06.011 ↗
44. High open-circuit voltage organic solar cells enabled by a difluorobenzoxadiazole- based conjugated polymer donor10.1007/s11426-018-9429-1 ↗
45. An effective heteroatom-substituted strategy on photovoltaic properties of D(A-Ar)2 small molecules for efficient organic solar cells10.1016/j.dyepig.2019.107595 ↗
46. Enhancement the photovoltaic performance of conjugated polymer based on simple head-to-head alkylthio side chains engineered bithiophene