journal article·2019-03

Bis(carboxylate) substituted benzodithiophene based wide-bandgap polymers for high performance nonfullerene polymer solar cells

Dan Hao, Miao Li, Yahui Liu, Cuihong Li, Zhishan Bo

Dyes and Pigments· Volume 162
Publisher page

Abstract

Abstract To develop wide bandgap donor materials for high performance nonfullerene polymer solar cells (NF PSCs), bis(carboxylate) substituted benzo[1,2-b:4,5-b]dithiophene (BDT) weak electron acceptor (A) unit was used to polymerize with 5-alkylthiophene-2-yl-substituted BDT or 5-alkylthiothiophene-2-yl-substituted BDT donor unit to construct donor-acceptor (D-A) alternative polymers PBDT-BDTC and PBDTS-BDTC, respectively. PBDT-BDTC and PBDTS-BDTC exhibit wide bandgaps over 1.90 eV and low lying highest occupied molecular orbital (HOMO) levels below −5.50 eV. The absorption and energy levels of these two polymers match well with those of the typical low bandgap acceptor ITIC-Th, resulting in a good complementary absorption from 300 to 900 nm and a low HOMO level offset of about 0.15 eV. NF PSCs with an inverted device structure were fabricated and power conversion efficiencies (PCEs) higher than 7% were achieve. Furthermore, PBDT-BDTC based PSCs exhibit much better photovoltaic performance than PBDTS-BDTC based ones after the treatment with 0.5% 1,8-diiodooctane (DIO). The optimized devices gave a PCE of 8.32% with an open-circuit voltage (Voc) of 0.92 V, a short-circuit current density (Jsc) of 13.91 mA/cm2, and a fill factor (FF) of 65.21%, indicating that PBDT-BDTC is a promising polymer donor for NF PSCs. To the best of our knowledge, a PCE of 8.32% is the highest record for bis(carboxylate) substituted BDT based polymers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
3. Nonfullerene acceptors with enhanced solubility and ordered packing for high-efficiency polymer solar cells10.1021/acsenergylett.8b00928 ↗
4. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
5. Processing and preparation of polymer and organic solar cells10.1016/j.solmat.2008.12.008 ↗
6. Towards a bright future: polymer solar cells with power conversion efficiencies over 10%10.1007/s11426-016-0424-9 ↗
7. Organic photovoltaics over three decades10.1002/adma.201800388 ↗
8. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
9. Recent advances in morphology optimization for organic photovoltaics10.1002/adma.201800453 ↗
10. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
11. Solvent additives: key morphology-directing agents for solution-processed organic solar cells10.1002/adma.201707114 ↗
12. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
13. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
14. Syntheses and photovoltaic properties of narrow band gap donor–acceptor copolymers with carboxylate-substituted benzodithiophene as electron acceptor unit10.1021/ma501078e ↗
15. A regioregular conjugated polymer for high performance thick-film organic solar cells without processing additive10.1039/C7TA02391J ↗
16. Finely designed medium-band-gap polymer donor with judiciously selecting chalcogen atom for high efficiency polymer solar cell10.1016/j.dyepig.2017.02.022 ↗
17. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
18. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
19. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
20. D-A copolymers based on a pentacyclic acceptor unit and a 3,3′-difluoro-2,2′-bithiophene for solar cells10.1007/s10118-017-1996-4 ↗
21. An effective way to reduce energy loss and enhance open-circuit voltage in polymer solar cells based on a diketopyrrolopyrrole polymer containing three regular alternating units10.1039/C6TA05471D ↗
22. Synthesis, characterization and solar cell application of a D-A copolymer with cyclopentadithiophene and fluorene as donor units10.1007/s10118-013-1302-z ↗
23. Balancing high open circuit voltage over 1.0 V and high short circuit current in benzodithiophene-based polymer solar cells with low energy loss: a synergistic effect of fluorination and alkylthiolation10.1002/aenm.201701471 ↗
24. Potential of nonfullerene small molecules with high photovoltaic performance10.1002/asia.201700692 ↗
25. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
26. Design of a new fused-ring electron acceptor with excellent compatibility to wide-bandgap polymer donors for high-performance organic photovoltaics10.1002/adma.201800403 ↗
27. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
28. Enhance the performance of polymer solar cells via extension of the flanking end groups of fused ring acceptors
29. Short-axis substitution approach on ladder-type benzodithiophene-based electron acceptor toward highly efficient organic solar cells
30. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
31. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
32. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
33. The design of highly efficient polymer solar cells with outstanding short-circuit current density based on small band gap electron acceptor10.1016/j.dyepig.2017.12.017 ↗
34. A highly efficient non-fullerene organic solar cell with a fill factor over 0.80 enabled by a fine-tuned hole-transporting layer10.1002/adma.201801801 ↗
35. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
36. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers10.1002/adma.201703973 ↗
37. Recent advances in wide-bandgap photovoltaic polymers10.1002/adma.201605437 ↗
38. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
39. High-performance nonfullerene polymer solar cells with open-circuit voltage over 1 V and energy loss as low as 0.54 eV10.1016/j.nanoen.2017.07.047 ↗
40. Poly(benzodithiophene) homopolymer for high-performance polymer solar cells with open-circuit voltage of near 1 V: a superior candidate to substitute for poly(3-hexylthiophene) as wide bandgap polymer10.1021/acs.chemmater.5b00481 ↗
41. Low-temperature, solution-processed, high-mobility polymer semiconductors for thin-film transistors10.1021/ja067879o ↗
42. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
43. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
44. Simultaneous enhancement of the molecular planarity and the solubility of non-fullerene acceptors: effect of aliphatic side-chain substitution on the photovoltaic performance10.1039/C7TA02141K ↗
45. Effect of non-fullerene acceptors' side chains on the morphology and photovoltaic performance of organic solar cells10.1021/acsami.7b09915 ↗