Ladder-type heteroheptacene-cored semiconductors for small-molecule solar cells
Source abstract
Abstract
Abstract The development of organic semiconductors is essential to improve the performance of organic solar cells (OSCs). In this work, a carbazole-based heteroheptacene (HHA) building block is first used to construct two semiconducting small molecules (CDTRH and C3TRH) with different conjugation lengths. The conjugation length of the small molecules (SMs) has a significant impact on the device performance of bulk heterojunction (BHJ) OSCs based on them and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM). CDTRH/PC71BM blend film exhibits a clear phase separation with smaller domain sizes compared to those based on C3TRH/PC71BM due to the shorter conjugation length of the former SM. Meanwhile, compared to C3TRH, CDTRH shows a higher hole mobility of 3.25 × 10−5 cm2 V−1 s−1 which contributes to the better performance of corresponding solar cells. Finally, OSCs based on CDTRH exhibit a power conversion efficiency (PCE) of 6.19% with an open-circuit voltage of 1.01 V, a short-circuit current of 14.36 mA cm−2, which is the best result in any ladder-type heteroheptacene-based SMs for OSCs. The PCE of 6.19% is much higher than the 3.83% PCE for the C3TRH-based devices fabricated under the same condition. These findings indicate that in combination with a suitable conjugation bridge, the ladder-type HHA core is a promising for developing efficient p-type SM semiconductors for OSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
2. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
3. Donor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells10.1039/C4CS00250D ↗
4. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
5. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
6. Single-junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
7. Indenothiophene-based asymmetric small molecules for organic solar cells10.1039/C7RA01902E ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Efficiency exceeding 10% for inverted polymer solar cells with a ZnO/ionic liquid combined cathode interfacial layer10.1039/C5TA00930H ↗
10. Single junction inverted polymer solar cell reaching power conversion efficiency 10.31% by employing dual-doped zinc oxide nano-film as cathode interlayer10.1038/srep06813 ↗
11. Difluorobenzothiadiazole-based small-molecule organic solar cells with 8.7% efficiency by tuning of π-conjugated spacers and solvent vapor annealing10.1002/adfm.201505020 ↗
12. Series of quinoidal methyl-dioxocyano-pyridine based π-extended narrow-bandgap oligomers for solution-processed small-molecule organic solar cell10.1021/acs.chemmater.5b01350 ↗
13. An electron-rich 2-alkylthieno[3,4-b]thiophene building block with excellent electronic and morphological tunability for high-performance small-molecule solar cells10.1039/C6TA08790F ↗
14. Molecular materials for organic photovoltaics: small is beautiful10.1002/adma.201305999 ↗
15. Nanoscale phase separation and high photovoltaic efficiency in solution-processed, small-molecule bulk heterojunction solar cells10.1002/adfm.200900832 ↗
16. Donor end-capped hexafluorinated oligomers for organic solar cells with 9.3% efficiency by engineering the position of π-bridge and sequence of two-step annealing10.1021/acs.chemmater.6b03796 ↗
17. Acceptor end-capped oligomeric conjugated molecules with broadened absorption and enhanced extinction coefficients for high-efficiency organic solar cells10.1002/adma.201600512 ↗
18. Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering10.1039/C7EE00805H ↗
19. High efficiency solution-processed two-dimensional small molecule organic solar cells obtained via low-temperature thermal annealing10.1039/C4TA03314K ↗
20. Small-molecule solar cells with fill factors up to 0.75 via a layer-by-layer solution process10.1002/aenm.201300626 ↗
21. Conjugated side-chain-isolated d–a copolymers based on benzo[1,2-b:4,5-b′]dithiophene-alt -dithienylbenzotriazole: synthesis and photovoltaic properties10.1021/cm3017006 ↗
22. Trilateral π-conjugation extensions of phenothiazine-based dyes enhance the photovoltaic performance of the dye-sensitized solar cells10.1016/j.dyepig.2015.09.001 ↗
23. Phenothiazine-based dyes for efficient dye-sensitized solar cells10.1039/C5TC04418A ↗
24. Design rules for donors in bulk-heterojunction solar cells-towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
25. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in Polymer−Fullerene solar cells10.1021/ja1112595 ↗
26. Synthesis of a new ladder-type benzodi (cyclopentadithiophene) arene with forced planarization leading to an enhanced efficiency of organic photovoltaics10.1021/cm3024082 ↗
27. Ladder-type oligo-p-phenylene -containing copolymers with high open-circuit voltages and ambient photovoltaic activity10.1021/ja909111p ↗
28. Side-chain engineering of diindenocarbazole-based large bandgap copolymers toward high performance polymer solar cells10.1039/C6TC01778A ↗
29. Highly soluble heteroheptacene: a new building block for p-type semiconducting polymers10.1021/ol102806x ↗
30. Diindenocarbazole-based large bandgap copolymers for high-performance organic solar cells with large open circuit voltages10.1039/C4PY00951G ↗
31. Ladder-type dithienonaphthalene-based small-molecule acceptors for efficient nonfullerene organic solar cells10.1021/acs.chemmater.7b02887 ↗
32. Donor–acceptor polymers based on multi-fused heptacyclic structures: synthesis, characterization and photovoltaic applications10.1039/c003040f ↗
33. Heteroheptacene-cored semiconducting molecules for non-fullerene organic solar cells10.1016/j.dyepig.2017.05.026 ↗
34. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with Bi(thienylenevinylene) side chains10.1021/ja060141m ↗
35. A low bandgap carbazole based small molecule for organic solar cells10.1016/j.orgel.2015.05.024 ↗
36. Open-circuit voltage up to 1.07 V for solution processed small molecule based organic solar cells10.1016/j.orgel.2014.06.012 ↗
37. Asymmetric -Indenothiophene-Based copolymers for bulk heterojunction solar cells with 9.14% efficiency10.1002/adma.201505957 ↗
38. A comparison of five experimental techniques to measure charge carrier lifetime in polymer/fullerene solar cells10.1002/aenm.201401345 ↗
39. Morphology of polymer/fullerene bulk heterojunction solar cells10.1039/B510618B ↗
40. Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends10.1038/nmat2102 ↗