Unfused vs fused thienoazacoronene-cored perylene diimide oligomer based acceptors for non-fullerene organic solar cells
Source abstract
Abstract
Abstract Ring-fusion is a feasible design strategy to improve the photovoltaic performance of perylene diimide (PDI) based non-fullerene acceptors (NFAs) in which multiple PDI units are linked at the bay position to an aromatic central core. Research on the effect of ring-fusion in the case of large π-conjugation cores is rarely investigated. In this contribution, the planar thienoazacoronene (TAC) was used as the central core, equipping with two ethylene bridged helical PDI dimer (PDI2), to afford the non-fused (TAC-diPDI2) and fused (FTAC-diPDI2) NFAs. The photovoltaic performances of these two NFAs were explored using PBDB-T as the electron donor. The non-fused TAC-diPDI2 based organic solar cells (OSCs) exhibits higher power conversion efficiency (PCE) of 6.59% than that of ring-fused FTAC-diPDI2 (4.24%). This result demonstrates that the conjugated degree of central core plays a vital role in the designing principle of ring-fusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Development of perylene-based non-fullerene acceptors through bay-functionalization strategy10.3390/ma13092148 ↗
2. Giant rylene imide-based electron acceptors for organic photovoltaics10.1021/acs.accounts.0c00677 ↗
3. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
4. Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells10.1038/s41560-021-00820-x ↗
5. D18, an eximious solar polymer!
6. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
7. A ring-locking strategy to enhance the chemical and photochemical stability of A–D–A-type non-fullerene acceptors10.1039/D0TA09924D ↗
8. Ternary blended fullerene-free polymer solar cells with 16.5% efficiency enabled with a higher-LUMO-level acceptor to improve film morphology10.1002/aenm.201901728 ↗
9. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
10. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
11. More than conformational “twisting” or “coplanarity”: molecular strategies for designing high-efficiency nonfullerene organic solar cells10.1021/acs.chemmater.5b04339 ↗
12. Electron trapping in dye/polymer blend photovoltaic cells10.1002/1521-4095(200009)12:17<1270::AID-ADMA1270>3.0.CO;2-8 ↗
13. Long-lived, non-geminate, radiative recombination of photogenerated charges in a polymer/small-molecule acceptor photovoltaic blend10.1021/jacs.8b05834 ↗
14. A non-fullerene acceptor with a fully fused backbone for efficient polymer solar cells with a high open-circuit voltage10.1039/C6TA07368A ↗
15. Electron acceptors based on α-substituted perylene diimide (PDI) for organic solar cells10.1021/acs.chemmater.5b04570 ↗
16. A simple perylene diimide derivative with a highly twisted geometry as an electron acceptor for efficient organic solar cells10.1039/C6TA04232E ↗
17. A star-shaped perylene diimide electron acceptor for high-performance organic solar cells10.1002/adma.201400525 ↗
18. A tetraphenylethylene core-based 3D structure small molecular acceptor enabling efficient non-fullerene organic solar cells10.1002/adma.201404152 ↗
19. Symmetry-induced orderly assembly achieving high-performance perylene diimide-based nonfullerene organic solar cells10.31635/ccschem.021.202000538 ↗
20. Reduced intramolecular twisting improves the performance of 3D molecular acceptors in non-fullerene organic solar cells10.1002/adma.201600997 ↗
21. Enhancement in open-circuit voltage in organic solar cells by using ladder-type nonfullerene acceptors10.1021/acsami.8b01308 ↗
22. Covalently bound clusters of alpha-substituted PDI-rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
23. High performance organic solar cells based on a non-fullerene acceptor with a spiro core10.1002/asia.201601741 ↗
24. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
25. Electron acceptors with varied linkages between perylene diimide and benzotrithiophene for efficient fullerene-free solar cells10.1039/C7TA02582C ↗
26. Rigidifying nonplanar perylene diimides by ring fusion toward geometry-tunable acceptors for high-performance fullerene-free solar cells10.1002/adma.201504120 ↗
27. Integrated linker-regulation and ring-fusion engineering for efficient additive-free non-fullerene organic solar cells10.1039/D0TC02499F ↗
28. Photophysical implications of ring fusion, linker length, and twisting angle in a series of perylenediimide-thienoacene dimers10.1039/D0SC02862B ↗
29. Effect of ring-fusion on miscibility and domain purity: key factors determining the performance of PDI-based nonfullerene organic solar cells10.1002/aenm.201800234 ↗
30. Novel star-shaped helical perylene diimide electron acceptors for efficient additive-free nonfullerene organic solar cells10.1021/acsami.8b06126 ↗
31. Ring fusion attenuates the device performance: star-shaped long helical perylene diimide based non-fullerene acceptors10.1039/C9TC02150G ↗
32. Nuckolls. Efficient organic solar cells with helical perylene diimide electron acceptors10.1021/ja5092613 ↗
33. Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells10.1038/ncomms9242 ↗
34. Long, atomically precise donor-acceptor cove-edge nanoribbons as electron acceptors10.1021/jacs.6b13093 ↗
35. Spiro-fused perylene diimide arrays10.1021/jacs.7b09140 ↗
36. Fused perylene diimide-based polymeric acceptors for efficient all-polymer solar cells10.1021/acs.macromol.7b01539 ↗
37. High-performance all-polymer solar cells achieved by fused perylenediimide-based conjugated polymer acceptors10.1021/acsami.8b03603 ↗
38. Novel perylene diimide-based polymers with electron-deficient segments as the comonomer for efficient all-polymer solar cells10.1039/C7TA09930D ↗
39. Improved performance of all-polymer solar cells enabled by naphthodiperylenetetraimide-based polymer acceptor10.1002/adma.201700309 ↗
40. Ternary polymer-perylenediimide-carbon nanotube photovoltaics with high efficiency and stability under super-solar irradiation10.1021/acsenergylett.6b00291 ↗
41. Asymmetrical vs symmetrical selenophene-annulated fused perylenediimide acceptors for efficient non-fullerene polymer solar cells10.1021/acsaem.8b01484 ↗
42. Highly efficient semitransparent organic solar cells with color rendering index approaching 10010.1002/adma.201807159 ↗
43. High performance PDI based ternary organic solar cells fabricated with nonhalogenated solvent10.1016/j.orgel.2019.03.052 ↗
44. Planar benzofuran inside-fused perylenediimide dimers for high VOC fullerene-free organic solar cells10.1021/acsami.8b19563 ↗
45. Isomeric effect on optoelectronic properties and photovoltaic performance of anthraquinone-core PeryleneDiimide (PDI) and helical PDI dimers10.1002/chem.201902302 ↗
46. A perylene diimide electron acceptor with a triphenylamine core: promoting photovoltaic performance via hot spin-coating10.1039/C9TC05713G ↗
47. Recent advances in molecular design of functional conjugated polymers for high-performance polymer solar cells10.1016/j.progpolymsci.2019.101175 ↗
48. A novel quasi-two-dimensional fused-perylenediimide electron acceptor for solvent additive-free non-fullerene organic solar cells10.1016/j.dyepig.2019.108119 ↗
49. The structural origins of intense circular dichroism in a waggling helicene nanoribbon10.1021/jacs.0c00646 ↗
50. Thiophene fused azacoronenes: regioselective synthesis, self-organization, charge transport and its incorporation in conjugated polymers10.1021/cm5018272 ↗
51. Efficient light-harvesting, energy migration, and charge transfer by nanographene-based nonfullerene small-molecule acceptors exhibiting unusually long excited-state lifetime in the film state10.1039/C9SC06456G ↗
52. Efficient exciton diffusion in micrometer-sized domains of nanographene-based nonfullerene acceptors with long exciton lifetimes in blend films with conjugated polymer10.1021/acsami.0c10834 ↗
53. A divergent route to core- and peripherally functionalized diazacoronenes that act as colorimetric and fluorescence proton sensors10.1039/C5SC00304K ↗
54. Light intensity dependence of open-circuit voltage of polymer: fullerene solar cells10.1063/1.1889240 ↗
55. Improved light harvesting and improved efficiency by insertion of an optical Spacer (ZnO) in solution-processed small-molecule solar cells10.1021/nl401758g ↗
56. Nonfullerene acceptor with “Donor-Acceptor combined π-bridge” for organic photovoltaics with large open-circuit Voltage10.1021/acsami.8b04541 ↗
57. Enhancement in open-circuit voltage in organic solar cells by using ladder-type nonfullerene acceptors10.1021/acsami.8b01308 ↗
58. Photophysical implications of ring fusion, linker length, and twisting angle in a series of perylenediimide–thienoacene dimers10.1039/D0SC02862B ↗