Tetrakis (N-phenothiazine) spirobifluorene-based hole-transporting material towards high photovoltage perovskite photovoltaics for driving electrochromic devices
Source abstract
Abstract
Abstract Wide-bandgap photovoltaics (WBPV) could not only provide electrical energy by photoelectronic conversion of the invisible part of the solar spectrum, but also usually had the unique advantage of high open circuit voltage (Voc). In this work, we reported a novel HTM based on tetrakis (N-phenothiazine) Spirobifluorene (Spiro-PT), its HOMO energy level could be well matched with MAPbBr3 perovskite HOMO energy level. This HTM could effectively suppress nonradiative recombination, which leads to an increase in the photovoltage of WBPV to more than 1.41 V. As a result, the n-i-p mesoscopic structured WBPV achieved a champion PCE of 7.36% as well as excellent operational stability exhibiting 91% of initial efficiency after 500 h continuous illumination without encapsulation. Based on the high Voc of the MAPbBr3/Spiro-PT device, the photovoltaic electrochromic device showed a response speed (the average coloring time was 40 s and the bleaching time was 272 s) and high average visible light transmittance contrast (about 37% in 450–780 nm), the corresponding electrochromic device with maximum dynamic contrast up to 46% at 600 nm between bleached and colored states. This WBPV-powered electrochromic system could provide a pathway towards stand-alone smart window technique for future energy-saving buildings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Transition Metal Oxide Nanomaterials · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
2. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
3. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
4. Perovskite solar cells go lead free10.1016/j.joule.2017.09.007 ↗
5. Theoretical limits for visibly transparent photovoltaics10.1063/1.4738896 ↗
6. Transparent, near-infrared organic photovoltaic solar cells for window and energy-scavenging applications10.1063/1.3567516 ↗
7. Emergence of highly transparent photovoltaics for distributed applications10.1038/s41560-017-0016-9 ↗
8. A perovskite cell with a record-high-Voc of 1.61 V based on solvent annealed CH3NH3PbBr3/ICBA active layer10.1039/C5NR07739G ↗
9. From window to solar cell and back10.1038/s41563-018-0017-5 ↗
10. Color and transparency-switchable semitransparent polymer solar cells towards smart windows10.1016/j.scib.2019.11.002 ↗
11. Properties, requirements and possibilities of smart windows for dynamic daylight and solar energy control in buildings: a state-of-the-art review10.1016/j.solmat.2009.08.021 ↗
12. Synthetic approaches for halide perovskite thin films10.1021/acs.chemrev.8b00318 ↗
13. Revealing the detailed path of sequential deposition for metal halide perovskite formation10.1126/sciadv.1701402 ↗
14. Largely enhanced VOC and stability in perovskite solar cells with modified energy match by coupled 2D interlayers10.1039/C7TA11295E ↗
15. Planar CH3NH3PbBr3 hybrid solar cells with 10.4% power conversion efficiency, fabricated by controlled crystallization in the spin-coating process10.1002/adma.201403140 ↗
16. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
17. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
18. Chemical engineering of methylammonium lead iodide/bromide perovskites: tuning of opto-electronic properties and photovoltaic performance10.1039/C5TA05470B ↗
19. CH3NH3PbCl3 single crystals: inverse temperature crystallization and visible-blind UV-photodetector10.1021/acs.jpclett.5b01666 ↗
20. Halide perovskites for selective ultraviolet-harvesting transparent photovoltaics10.1016/j.joule.2018.06.004 ↗
21. Efficiency vs. stability: dopant-free hole transporting materials towards stabilized perovskite solar cells10.1039/C9SC01184F ↗
22. Recent progress in electron transport layers for efficient perovskite solar cells10.1039/C5TA09011C ↗
23. Thienoisoindigo-based dopant-free hole transporting material for efficient p-i-n perovskite solar cells with the grain size in micrometer scale10.1021/acs.jpcc.8b10070 ↗
24. Triphenylamine dibenzofulvene-derived dopant-free hole transporting layer induces micrometer-sized perovskite grains for highly efficient near 20% for p-i-n perovskite solar cells
25. Room temperature fabrication of CH3NH3PbBr3 by anti-solvent assisted crystallization approach for perovskite solar cells with fast response and small J–V hysteresis10.1016/j.nanoen.2015.08.023 ↗
26. A new 1,3,4-oxadiazole-based hole-transport material for efficient CH3NH3PbBr3 perovskite solar cells10.1002/cssc.201501665 ↗
27. Relationship between ion migration and interfacial degradation of CH3NH3PbI3 perovskite solar cells under thermal conditions10.1038/s41598-017-00866-6 ↗
28. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
29. Multicolored, low-power, flexible electrochromic devices based on ion gels10.1021/acsami.6b01307 ↗
30. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
31. Effects of core moiety and substituted positions in phenothiazine-based hole transporting materials towards high thermal stability and good hole mobility10.1016/j.tet.2017.11.003 ↗
32. Spiro-phenylpyrazole/fluorene as hole-transporting material for perovskite solar cells10.1038/s41598-017-08187-4 ↗
33. Modeling space-charge-limited currents in organic semiconductors: extracting trap density and mobility10.1103/PhysRevB.84.195209 ↗
34. Addressing the stability issue of perovskite solar cells for commercial applications10.1038/s41467-018-07255-1 ↗
35. Microstructural characterisations of perovskite solar cells - from grains to interfaces: techniques, features, and challenges10.1002/aenm.201700912 ↗
36. Current status of electron transport layers in perovskite solar cells: materials and properties10.1039/C7RA00002B ↗
37. The role of the interfaces in perovskite solar cells10.1002/admi.201901469 ↗
38. Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor10.1039/C4EE00762J ↗
39. Detecting and identifying reversible changes in perovskite solar cells by electrochemical impedance spectroscopy10.1039/C9RA07048F ↗
40. Enhancement of photovoltaic performance of perovskite solar cells by modification of the interface between the perovskite and mesoporous TiO2 film10.1016/j.solmat.2016.05.004 ↗
41. Enhanced performance in hybrid perovskite solar cell by modification with spinel lithium titanate10.1039/C4TA05762G ↗
42. Elucidating the impact of charge selective contact in halide perovskite through impedance spectroscopy10.1002/admi.201901193 ↗
43. Spiro-OMeTAD or CuSCN as a preferable hole transport material for carbon-based planar perovskite solar cells10.1039/D0TA03951A ↗
44. Toward a new energy era: self-driven integrated systems based on perovskite solar cells10.1002/solr.201900320 ↗
45. Recent advances in semi-transparent polymer and perovskite solar cells for power generating window applications10.1039/C8EE00154E ↗
46. Perovskite photovoltachromic supercapacitor with all-transparent electrodes10.1021/acsnano.6b01202 ↗
47. Perovskite photovoltachromic cells for building integration10.1039/C5EE00896D ↗
48. Ultrafast electrochromic windows based on redox-chromophore modified nanostructured semiconducting and conducting films10.1021/jp001763b ↗