Influence of brominated-TPA-stilbazole based ancillary ligand on the photocurrent and photovoltage in dye-sensitized solar cells
Source abstract
Abstract
Abstract Two novel heteroleptic brominated-TPA-stilbazole based Ru (II)-sensitizers denoted as SD-11 and SD-11 mono were designed, synthesized and characterized for dye-sensitized solar cells (DSCs) in comparison to benchmarked dye N719. The molecular structures of SD-11 and SD-11 mono were confirmed using FTIR, 1H-NMR and mass spectrometry. The aim was to systematically study the effect of mono (SD-11 mono) versus bis-brominated-TPA moiety (SD-11) on molar absorptivity, ground and excited state oxidation potentials, light harvesting efficiency (LHE), incident-photon-to-current conversion efficiency (IPCE), short-circuit photocurrent density (Jsc), and total solar-to-electric conversion efficiency (η) for DSCs. Optical results revealed that SD-11 and SD-11 mono have higher molar extinction coefficients, narrower HOMO−LUMO gaps compared to N719. Hence, it was found that SD-11 exhibited remarkably greater Jsc than SD-11 mono and interestingly showed comparable extinction coefficients. However, in optimized conditions, SD-11 showed a higher Jsc of 22.1 mA cm−2, Voc of 0.68 V with (% η) of 8.7 compared to Jsc of 14.4 mA cm−2, Voc of 0.63 V and with (% η) of 5.8 for SD-11 mono whereas N719 attained a Jsc of 15.9 mA cm−2, Voc of 0.74 V with (% η) of 7.6 under the same experimental device conditions. It was concluded that SD-11 outperformed SD-11 mono in photovoltaic performance when anchored on TiO2, owing to better light-harvesting ability. These results clearly demonstrated that the enhancement of the photovoltaic performance in SD-11 can be attributed to the presence of more number of –Br group.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Advanced Nanomaterials in Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. High-performance nanostructured inorganic-organic heterojunction solar cells10.1021/nl101322h ↗
3. Charge collection and pore filling in solid-state dye-sensitized solar cells10.1088/0957-4484/19/42/424003 ↗
4. Effect of hydrocarbon chain length of amphiphilic ruthenium dyes on solid-state dye-sensitized photovoltaics10.1021/nl050555y ↗
5. Solar energy conversion by dye-sensitized photovoltaic cells10.1021/ic0508371 ↗
6. Dye-sensitized nanocrystalline solar cells10.1039/b617073k ↗
7. Highly efficient light-harvesting ruthenium sensitizer for thin-film dye-sensitized solar cells10.1021/nn900756s ↗
8. Dye-sensitized solar cells10.1021/cr900356p ↗
9. Enhanced photovoltaic performances of dye-sensitized solar cells by Co-Sensitization of benzothiadiazole and squaraine-based dyes10.1021/acsami.5b11134 ↗
10. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
11. Crystal growth engineering for high efficiency perovskite solar cells10.1039/C6CE00813E ↗
12. Influence of ancillary ligands in dye-sensitized solar cells10.1021/acs.chemrev.5b00621 ↗
13. Tian · 2008 · 11023
14. Triphenylamine-based dyes for dye-sensitized solar cells10.1016/j.dyepig.2008.10.012 ↗
15. Push–pull ruthenium diacetylide complexes: new dyes for p-type dye-sensitized solar cells10.1039/C5RA25899E ↗
16. Xu · 2008 · 874
17. Ganesh · 2014 · 43 · 11305
18. Choi · 2014 · 37
19. Influence of mono versus bis-electron-donor ancillary ligands in heteroleptic Ru( ii ) bipyridyl complexes on electron injection from the first excited singlet and triplet states in dye-sensitized solar cells10.1039/C4TA01942C ↗
20. Monodentate pyrazole as a replacement of labile NCS for Ru (II) photosensitizers: minimum electron injection free energy for dye-sensitized solar cells10.1016/j.dyepig.2015.04.005 ↗
21. Structure-property relationships: steric effect in ancillary ligand and how it influences photocurrent and photovoltage in dye-sensitized solar cells10.1016/j.dyepig.2014.08.005 ↗
22. Toward reliable density functional methods without adjustable parameters: the PBE0 model10.1063/1.478522 ↗
23. Optimization of Gaussian-type basis sets for local spin density functional calculations. Part I. Boron through neon, optimization technique and validation10.1139/v92-079 ↗
24. A local density functional study of the structure and vibrational frequencies of molecular transition-metal compounds10.1021/j100195a022 ↗
25. Influence of cyclic versus acyclic oxygen-containing electron donor ancillary ligands on the photocurrent, photovoltage and photostability for high efficiency dye-sensitized solar cells10.1039/c3ta12748f ↗
26. Proton-controlled electron injection from molecular excited states to the empty states in nanocrystalline TiO 210.1021/la010939d ↗
27. The renaissance of dye-sensitized solar cells10.1038/nphoton.2012.22 ↗
28. Modeling of an equivalent circuit for dye-sensitized solar cells: improvement of efficiency of dye-sensitized solar cells by reducing internal resistance10.1016/j.crci.2005.02.046 ↗
29. Improvement of efficiency of dye-sensitized solar cells based on analysis of equivalent circuit10.1016/j.jphotochem.2006.04.030 ↗
30. Determination of parameters of electron transport in dye-sensitized solar cells using electrochemical impedance spectroscopy10.1021/jp061693u ↗
31. Frisch · 2009
32. Structure-property relationship of hetero-aromatic-electron-donor antennas of polypyridyl Ru (II) complexes for high efficiency dye-sensitized solar cells10.1002/pip.2349 ↗