Optoelectronic properties and aggregation effects on the performance of planar versus contorted pyrene-cored perylenediimide dimers for organic solar cells
Source abstract
Abstract
Abstract In this work, we present a new strategy to develop small molecules based on perylenediimde (PDI) with fused and contorted conjugated backbones as electron acceptors for fullerene-free organic solar cells. The two new electron acceptors, 27-Py-PDI and 49-Py-PDI, containing binary PDI units fused with pyrene at different positions were structurally isomers, which were investigated systematically. Theoretical calculations indicated that the two positional isomers exhibit distinct molecular geometries (planar for 27-Py-PDI vs contorted for 49-Py-PDI), which lead to huge differences on their synthetic methods, aggregation effects and their optoelectronic properties. The effects of structural isomerism on the molecular geometry, optical spectra, energy levels, charge carrier mobility and the morphology discrepancies as well as the corresponding photovoltaic performance were fully investigated. Temperature-dependent 1H NMR and the film UV–vis spectroscopy were used to study the molecular aggregation behaviors. Calculations of nuclear independent chemical shifts (NICS) indicate significant difference of the aromaticity between the isomers. Blended with donor materials of PTB7-Th to fabricate the inverted solar cells, an encouraging PCE of 4.53% along with an impressive open-circuit voltage (VOC) of 1.0 V (higher than the other acceptors based on PDIs and the PC71BM) were achieved by using 49-Py-PDI, which were superior to those of its isomer 27-Py-PDI (2.51%). The work suggests that introducing rigid and contorted features into fully fused acceptors based on PDI motifs can enhance the interface energy gap (ΔEDA), extend the π-delocalization and decrease the conformational disorder resulting into improved VOC without sacrificing JSC in OPV devices. This design strategy by introducing rigid and steric hindrance to increase intermolecular strain to construct fully ring fused contorted acceptors is an effective approach for the development of novel NFAs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
2. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
3. Small molecule semiconductors for high-efficiency organic photovoltaics10.1039/c2cs15313k ↗
4. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
5. Examining the effect of the dipole moment on charge separation in donor–acceptor polymers for organic photovoltaic applications10.1021/ja208642b ↗
6. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
7. Polymer solar cells with enhanced fill factors10.1038/nphoton.2013.207 ↗
8. Suppressed charge recombination in inverted organic photovoltaics via enhanced charge extraction by using a conductive fullerene electron transport layer10.1002/adma.201402276 ↗
9. Polymer donor–polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
10. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
11. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
12. Imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
13. Aromatic-diimide-based n-type conjugated polymers for all-polymer solar cell applications
14. Perylene imides for organic photovoltaics: yesterday, today, and tomorrow10.1002/adma.201104447 ↗
15. Charge transfer and aggregation effects on the performance of planar vs twisted nonfullerene acceptor isomers for organic solar cells10.1021/acs.chemmater.8b01047 ↗
16. Perylene diimides based materials for organic solar cells10.1016/j.dyepig.2013.01.020 ↗
17. Covalently bound clusters of alpha-substituted PDI-rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
18. Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells10.1038/ncomms9242 ↗
19. Long, atomically precise donor−acceptor cove-edge nanoribbons as electron acceptors10.1021/jacs.6b13093 ↗
20. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
21. Three-bladed rylene propellers with three-dimensional network assembly for organic electronics10.1021/jacs.6b04368 ↗
22. High Efficiency Non-fullerene organic tandem photovoltaics based on ternary blend subcells10.1021/acs.nanolett.8b03950 ↗
23. Tuning charge generation process of rylene imide-based solar cells via chalcogen-atom-annulation10.1021/acs.chemmater.9b00056 ↗
24. Efficient organic solar cells with extremely high open-circuit voltages and low voltage losses by suppressing nonradiative recombination losses10.1002/aenm.201801699 ↗
25. Recent development of perylene diimide-based small molecular non-fullerene acceptors in organic solar cells10.1016/j.cclet.2017.08.025 ↗
26. Propeller-shaped acceptors for high-performance non-fullerene solar cells: importance of the rigidity of molecular geometry10.1021/acs.chemmater.6b04287 ↗
27. A Nonfullerene small molecule acceptor with 3D interlocking geometry enabling efficient organic solar cells10.1002/adma.201504010 ↗
28. Electron acceptors with varied linkages between perylene diimide and benzotrithiophene for efficient fullerene-free solar cells10.1039/C7TA02582C ↗
29. A non-fullerene acceptor with a fully fused backbone for efficient polymer solar cells with high open-circuit voltage10.1039/C6TA07368A ↗
30. Electron acceptors with a truxene core and perylene diimide branches for organic solar cells: the effect of ring-fusion10.3389/fchem.2018.00328 ↗
31. Ring-fusion as a perylenediimide dimer design concept for high-performance non-fullerene organic photovoltaic acceptors10.1039/C5SC04956C ↗
32. Conjugated polymer acceptors based on fused perylene bisimides with a twisted backbone for non-fullerene solar cells10.1039/C7PY00444C ↗
33. Synthesis and characterization of novel benzodithiophene-fused perylene diimide acceptors: regulate photovoltaic performance via structural isomerism10.1016/j.dyepig.2019.04.027 ↗
34. Electron delocalization in perylene diimide helicenes10.1002/anie.201607878 ↗
35. A helicene nanoribbon with greatly amplified chirality10.1021/jacs.8b03535 ↗
36. Nanographene imides featuring dual-core sixfold [5]helicenes10.1002/anie.201810734 ↗
37. Corannurylene pentapetalae10.1021/jacs.9b00053 ↗
38. Rigidifying nonplanar perylene diimides by ring fusion toward geometry-tunable acceptors for high-performance fullerene-free solar cells10.1002/adma.201504120 ↗
39. Triplet tellurophene-based acceptors for organic solar cells10.1002/anie.201712011 ↗
40. Highly twisted ladder-type backbone bearing perylene diimides for non-fullerene acceptors in organic solar cells10.1016/j.dyepig.2018.09.042 ↗
41. A Design concept of planar conjugated ladder oligomers of perylene bisimides and efficient synthetic strategy via regioselective photocyclization10.1039/b925605a ↗
42. Synthesis, structures, and optoelectronic properties of pyrene-fused thioxanthenes10.1021/acs.orglett.7b00276 ↗
43. A decatwistacene with an overall 170° torsion10.1002/anie.201709342 ↗
44. Pyrazine-containing acene-type molecular ribbons with up to 16 rectilinearly arranged fused aromatic rings10.1021/ja800311a ↗
45. Hexakis(4-iodophenyl)-peri-hexabenzocoronene- a versatile building block for highly ordered discotic liquid crystalline materials10.1021/ja037519q ↗
46. Versatile synthesis and enlargement of functionalized distorted heptagon-containing nanographenes10.1039/C6SC02895K ↗
47. Two photon absorption study of low-bandgap, fully conjugated perylene diimide-thienoacene-perylene diimide ladder-type molecules10.1021/acs.chemmater.7b01512 ↗
48. Helical ribbons for molecular electronics10.1021/ja503533y ↗
49. Spiro-fused perylene diimide arrays10.1021/jacs.7b09140 ↗
50. Synthesis of ladder-type thienoacenes and their electronic and optical properties10.1021/jacs.5b10175 ↗
51. Design rules for minimizing voltage losses in high-efficiency organic solar cells10.1038/s41563-018-0128-z ↗
52. A low-bandgap semiconducting polymer for photovoltaic devices and infrared emitting diodes10.1002/1616-3028(20021016)12:10<709::AID-ADFM709>3.0.CO;2-N ↗
53. Simple perylene diimide based polymer acceptor with tuned aggregation for efficient all-polymer solar cells10.1016/j.dyepig.2019.107608 ↗
54. Fullerene-free polymer solar cell based on a polythiophene derivative with an unprecedented energy loss of less than 0.5 eV10.1039/C6TA07672F ↗
55. Self-doping n-type polymer as cathode interface layer enables efficient organic solar cells by increasing built-in electric field and boosting interface contact10.1039/C9TC03506K ↗
56. The comprehensive utilization of the synergistic effect of fullerene and non-fullerene acceptors to achieve highly efficient polymer solar cells10.1039/C9TA04286E ↗
57. Selective bromination of perylene diimides under mild conditions10.1021/jo070367n ↗
58. Pyrene-based materials for organic electronics10.1021/cr100428a ↗
59. Synthesis and electroluminescence of novel pyrene-fused chromophores10.1021/acs.orglett.5b01793 ↗