journal article·2018-11

Adjusted photovoltaic performance of tetrafluorobenzene-based small molecules by tailoring with different arm of acceptor units

Min Li, Guangjun Zhang, Lin Xiong, Mengbing Zhu, Yong Pei, Qiang Peng, Yu Liu

Dyes and Pigments· Volume 158
Publisher page

Abstract

Abstract Three π-conjugated small molecules (SMs) with D(π-A-Ar)2 molecular frameworks are designed and synthesized as the donor materials in organic solar cells (OSCs). Containing tetrafluorobenzene (TFB) as central donor (D) core, thiophene as π-bridge, 2-octylthiophene (T) as terminal (Ar) unit, as well as the different arm of acceptor (A) units, pyridine-diketopyrrolopyrrole (PyDPP), thiophene-diketopyrrolopyrrole (TDPP) and isoindigo (IID), namely DTTFB(PyDPP-T)2, DTTFB(TDPP-T)2 and DTTFB(IID-T)2, respectively. The impacts of the different acceptor arms combined with the TFB core on the optical absorption, electrochemical property, hole mobility, film morphology, and solar cell performance were studied thoroughly. As a result, these SMs presented various light absorption properties, electrochemical performances, and hole mobilities, which are helpful to the optimization of short-circuit current (Jsc), open-circuit voltage (Voc) and fill factor (FF) properties, respectively. Especially, the DTTFB(TDPP-T)2 showed a relatively lower optical band gap of 1.53 eV, and also showed the best coplanarity among the three SMs, which help it to get a higher Jsc of 12.44 mA cm−2 and a higher FF of 59.50%, and resulting in obtaining a best power conversion efficiency (PCE) of 5.15% in the DTTFB(TDPP-T)2/PC71BM-based cells, which is about 2.8 and 1.6 times higher than that of DTTFB(PyDPP-T)2/PC71BM and DTTFB(IID-T)2/PC71BM based cells, respectively. Obviously, introducing different acceptor units as arms onto the D(π-A-Ar) type SMs could be a promising strategy for designing high-performance TFB-based linear molecular donor materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Benzo[1,2-b:4,5-b′]- dithiophene (BDT)-based small molecules for solution processed organic solar cells10.1039/C4TA06452F ↗
2. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
3. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
4. Design and synthesis of molecular donors for solution-processed high-efficiency organic solar cells
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
7. Efficient organic solar cells processed from hydrocarbon solvents
8. Triindole-cored star-shaped molecules for organic solar cells10.1039/c3ta11182b ↗
9. An A–D–A small molecule based on the 3,6-dithienylcarbazole electron donor (D) unit and nitrophenyl acrylonitrileelectron acceptor (A) units for solution processed organic solar cells10.1039/C2TA00749E ↗
10. A planar small molecule with dithienosilole core for high efficiency solution- processed organic photovoltaic cells10.1021/cm202588h ↗
11. The influence of polymer purification on photovoltaic device performance of a series of indaceno- dithiophene donor polymers10.1002/adma.201300027 ↗
12. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
13. Solution-processed, indacenodithiophene-based, small-molecule organic field-effect transistors and solar cells10.1039/C4TC00721B ↗
14. High-performance solution-processed small-molecule solar cells based on a dithienogermole-containing molecular donor10.1002/aenm.201400987 ↗
15. A solution-processable small molecule based on benzodithiophene and diketopyrrolopyrrole for high- performance organic solar cells10.1002/aenm.201300181 ↗
16. Solution-processed bulk heterojunction solar cells based on a porphyrin small molecule with 7% power conversion efficiency10.1039/C3EE43761B ↗
17. Series of quinoidal methyl-dioxocyano-pyridine based π-extended narrow-bandgap oligomers for solution-processed small- molecule organic solar cells10.1021/acs.chemmater.5b01350 ↗
18. High open circuit voltage in regioregular narrow band gap polymer solar cells10.1021/ja506785w ↗
19. 25th anniversary article: isoindigo-based polymers and small molecules for bulk heterojunction solar cells and field effect transistors10.1002/adma.201304945 ↗
20. Improved photovoltaic performance of star-shaped molecules with triphenylamine core by tuning substituted position of carbazolyl at terminal10.1039/C5TA00166H ↗
21. 7-Azaisoindigo as a new electron deficient component of small molecule chromophores for organic solar cells10.1039/C3TA14263A ↗
22. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
23. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7% efficiency10.1002/ange.201005451 ↗
24. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer- fullerene solar cells10.1021/ja1112595 ↗
25. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
26. Fluorination of polythiophene derivatives for high performance organic photovoltaics10.1021/cm502229k ↗
27. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
28. High mobility ambipolar diketopyrrolopyrrole-based conjugated polymer synthesized via direct arylation polycondensation10.1002/adma.201502896 ↗
29. Influence of backbone fluorination in regioregular poly(3-alkyl-4-fluoro)thiophenes10.1021/jacs.5b02785 ↗
30. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
31. Fluorination of polythiophene derivatives for high performance organic photovoltaics10.1021/cm502229k ↗
32. Over 11% efficiency in tandem polymer solar cells featured by a low-band-gap polymer with fine-tuned properties10.1002/adma.201600373 ↗
33. Comparison of two D-A type polymers with each being fluorinated on D and A unit for high performance solar cells10.1002/adfm.201402210 ↗
34. Impact of backbone fluorination on π-conjugated polymers in organic photovoltaic devices: a review10.3390/polym8010011 ↗
35. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
36. Fluorine substitution enhanced photovoltaic performance of a D-A1-D-A2 copolymer10.1039/c3cc44931a ↗
37. Implication of fluorine atom on electronic properties, ordering structures, and photovoltaic performance in naphthobisthiadiazole-Based semiconducting polymers10.1021/jacs.6b05418 ↗
38. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
39. Fluorination on both D and A units in D-A type conjugated copolymers based on difluorobithiophene and benzothiadiazole for highly efficient polymer solar cells10.1039/C5EE00855G ↗
40. A fluorinated polythiophene derivative with stabilized backbone conformation for highly efficient fullerene and non-fullerene polymer solar cells10.1021/acs.macromol.6b00248 ↗
41. High electron mobility in solution-cast and vapor-deposited phenacyl-q uaterthiophene-based field-Effect transistors:toward n-type polythiophenes10.1021/ja054276o ↗
42. Structure-function relationships of high-electron mobility naphthalene diimide copolymers prepared via direct arylation10.1021/cm503033j ↗
43. Room temperature processed polymers for high-efficient polymer solar cells with power conversion efficiency over 9%10.1016/j.nanoen.2017.05.008 ↗
44. Impact of the number of fluorine atoms on crystalline, physicochemical and photovoltaic properties of low bandgap copolymers based on 1,4-dithienylphenylene and diketopyrrolopyrrole10.1016/j.polymer.2017.08.018 ↗
45. Synthesis and photovoltaic performance of DPP-based small molecules with tunable energy levels by altering the molecular terminals10.1016/j.dyepig.2015.10.006 ↗
46. Acceptor-donor-acceptor-based small molecules with varied crystallinity: processing additive-induced nanofibril in blend film for photovoltaic applications10.1039/c3nr03048b ↗
47. Synthesis and photovoltaic properties of D-A copolymers based on dithienosilole and benzotriazole10.1021/ma201673m ↗
48. Rational design of small molecular donor for solution-processed organic photovoltaics with 8.1% efficiency and high fill factor via multiple fluorine substituents and thiophene bridge10.1002/adfm.201500190 ↗
49. Design rules for donors in bulk-heterojunction solar cells-towards 10% energy-conversion efficiency10.1002/adma.200501717 ↗
50. Efficient strategies to improve photovoltaic performance of linear-shape molecules by introducing large planar aryls in molecular center and terminals10.1016/j.orgel.2014.12.004 ↗
51. An ester-functionalized diketopyrrolopyrrole molecule with appropriate energy levels for application in solution-processed organic solar cells10.1039/C2TA00148A ↗
52. Solution processable low bandgap small molecule donors with naphthalene end-groups for organic solar cells10.1016/j.synthmet.2012.06.027 ↗
53. A solution-processable small molecule based on benzodithiophene and diketopyrrolopyrrole for high-performance organic solar cells10.1002/aenm.201300181 ↗
54. An easily accessible isoindigo-based polymer for high-performance polymer solar cells10.1021/ja206610u ↗
55. Record high electron mobility of 6.3 cm2V-1s-1 achieved for polymer semiconductors using a new building block10.1002/adma.201305981 ↗
56. Isoindigo, a versatile electron-deficient unit for high-performance organic electronics
57. Control of polymer-packing orientation in thin films through synthetic tailoring of backbone coplanarity10.1021/cm402489a ↗
58. A new isoindigo-based molecule with ideal energy levels for solution-processable organic solar cells10.1016/j.dyepig.2013.02.003 ↗
59. Synthesis and photovoltaic properties of new conjugated polymers based on two angular-shaped naphthodifuran isomers and isoindigo10.1016/j.solmat.2013.07.049 ↗
60. Charge Carrier recombination in organic solar cells10.1016/j.progpolymsci.2013.08.008 ↗
61. Improving photovoltaic performance of the linear A-Ar-A-type small molecules with diketopyrropyrrole arms by tuning the linkage position of the anthracene core10.1021/acsami.5b03338 ↗
62. Mobility guidelines for high fill factor solution-processed small molecule solar cells10.1002/adma.201401725 ↗
63. Difluorobenzothiadiazole-based small-molecule organic solar cells with 8.7% efficiency by tuning of π-conjugated spacers and solvent vapor annealing10.1002/adfm.201505020 ↗
64. Tuning the central fused ring and terminal units to improve the photovoltaic performance of Ar(A-D)2 type small molecules in solution-processed organic solar cells10.1039/C6TA00416D ↗