journal article·2021-04Open access

Influence of alkyne spacers on the performance of thiophene-based donors in bulk-heterojunction organic photovoltaic cells

John Marques dos Santos, Marios Neophytou, Alan Wiles, Calvyn Travis Howells, Raja Shahid Ashraf, Iain McCulloch, Graeme Cooke

Dyes and Pigments· Volume 188

Abstract

Abstract The ever-increasing demand for renewable energy has led to the intensification of research focused upon harnessing the abundant energy from sunlight. Solution processed organic solar cells fabricated using conjugated polymer donor materials dominated the early development of organic photovoltaics (OPV). More recently, organic solar cells fabricated using small molecule donors have become increasingly attractive due to the advantages these systems have over their polymeric counterparts. These include reproducible synthesis and the ability to more accurately develop structure-activity relationships. Here, we report the synthesis of thiophene based small molecule donors that have been used to investigate the influence of alkyne π-spacers on the optical, electronic and photovoltaic properties of solution-processable bulk-heterojunction (BHJ) organic OPV cells. Additionally, we compare the addition of 3,4-ethylenedioxythiophene (EDOT) units in place of the end-thiophene of these derivatives. We found that the compounds featuring alkyne moieties displayed poor charge transfer and blue-shifted UV–vis spectra, whereas the incorporation of the EDOT units increased charge transfer for the non-alkyne derivative resulting in red-shifted absorbance. DFT calculations predicted higher charge separation/mobility and lower charge generation for the compounds without alkyne units. Indeed, greater Jsc values and higher PCEs were found for the compounds lacking alkyne spacers. EDOT containing compounds showed poor performance which is likely due to an unfavourable morphology and higher HOMO level, leading to lower Voc. Hence, the simplest 5T-1 molecule showed the highest performance of 3.24%, which is c.a. 1.6x that of the alkyne-containing 5TA-1 and c.a. 2.9x that of the EDOT-containing derivative. This study demonstrates that alkyne spacers can be detrimental to orbital interactions, charge transfer and OPV performance, and that the EDOT unit can be added to provide greater charge transfer due to its auxiliary donating ability. However, careful design is required to ensure higher Voc values and a favourable morphology in thiophene-based solution-processable OPVs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. 16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity10.1039/C9TA06929A ↗
2. Simple organic donors based on halogenated oligothiophenes for all small molecule solar cells with efficiency over 11%10.1039/D0TA00159G ↗
3. Enhanced performance of ternary organic solar cells with a wide bandgap acceptor as the third component10.1039/C9TA09268D ↗
4. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
5. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
6. 17% efficient organic solar cells based on liquid exfoliated WS 2 as a replacement for PEDOT:PSS10.1002/adma.201902965 ↗
7. Use of the phen‐NaDPO:Sn(SCN) 2 blend as electron transport layer results to consistent efficiency improvements in organic and hybrid perovskite solar cells10.1002/adfm.201905810 ↗
8. Reduced recombination and capacitor-like charge buildup in an organic heterojunction10.1021/jacs.9b12526 ↗
9. 17.1% efficient single-junction organic solar cells enabled by n-type doping of the bulk-heterojunction10.1002/advs.201903419 ↗
10. Small molecule semiconductors for high-efficiency organic photovoltaics
11. Bithiopheneimide-dithienosilole/dithienogermole copolymers for efficient solar cells: information from structure-property-device performance correlations and comparison to thieno[3,4- c ]pyrrole-4,6-dione analogues10.1021/ja3081583 ↗
12. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
13. Thieno[3,4-b]thiophene-Based novel small-molecule optoelectronic materials10.1021/acs.accounts.7b00050 ↗
14. Fused-thiophene based materials for organic photovoltaics and dye-sensitized solar cells10.3390/polym6102645 ↗
15. All-polymer solar cells: recent progress, challenges, and prospects10.1002/anie.201808976 ↗
16. Alkynyl-Functionalized head-to-head linkage containing bithiophene as a weak donor unit for high-performance polymer semiconductors10.1021/acs.chemmater.7b01052 ↗
17. Thiophene-based conjugated polymers for light-emitting diodes: effect of aryl groups on photoluminescence efficiency and redox behavior10.1021/ma0107051 ↗
18. Thiophene-based molecular and polymeric semiconductors for organic field effect transistors and organic thin film transistors10.1007/s10854-018-9936-9 ↗
19. Reducing the effciency–stability–cost gap of organic photovoltaics with highly e cient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
20. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
21. The structure-property relationships of D-π-A BODIPY dyes for dye-sensitized solar cells10.1002/tcr.201500251 ↗
22. Donor end-capped hexafluorinated oligomers for organic solar cells with 9.3% efficiency by engineering the position of π-bridge and sequence of two-step annealing10.1021/acs.chemmater.6b03796 ↗
23. P3HT:PCBM, best seller in polymer photovoltaic research10.1002/adma.201100792 ↗
24. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
25. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
26. A series of simple oligomer-like small molecules based on oligothiophenes for solution-processed solar cells with high efficiency10.1021/jacs.5b00305 ↗
27. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
28. Domino direct arylation and cross-aldol for rapid construction of extended polycyclic π-scaffolds10.1021/jacs.7b03412 ↗
29. Synthesis and Evaluation of Scalable D-A-D π-extended oligomers as p-type organic materials for bulk-heterojunction solar cells10.3390/polym12030720 ↗
30. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
31. A novel small molecule based on dithienophosphole oxide for bulk heterojunction solar cells without pre- or post-treatments10.1016/j.dyepig.2017.04.007 ↗
32. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
33. Enhanced performance of dye-sensitized solar cells with Y-shaped organic dyes containing10.1039/C5NJ02967H ↗
34. Auxiliary donors for phenothiazine sensitizers for dye-sensitized solar cells–how important are they really?10.1039/C9TA00472F ↗
35. Influence of triple bonds as π-spacer units in metal-free organic dyes for dye-sensitized solar cells10.1021/jp102697p ↗
36. Porphyrin sensitizers with donor structural engineering for superior performance dye-sensitized solar cells and tandem solar cells for water splitting applications10.1002/aenm.201602117 ↗
37. Molecular design and synthesis of D-π-A structured porphyrin dyes with various acceptor units for dye-sensitized solar cells10.1039/C8TC05283B ↗
38. D-π-A-Structured porphyrins with extended auxiliary π-spacers for highly efficient dye-sensitized solar cells10.1021/acsami.9b05510 ↗
39. Solution-processable crystalline platinum-acetylide oligomers with broadband Absorption for photovoltaic cells10.1021/cm903329a ↗
40. Efficient diketopyrrolopyrrole-based small-molecule bulk-heterojunction solar with different electron-donating end-groups10.1002/asia.201402223 ↗
41. Design, synthesis and electronic properties of push–pull–push type dye10.1039/C5RA13416A ↗
42. Novel A-D-A type small molecules with b-alkynylated BODIPY flanks for bulk heterojunction solar cells10.1016/j.orgel.2017.06.054 ↗
43. Rational engineering of BODIPY-bridged trisindole derivatives for solar cell applications10.1002/cssc.201700465 ↗
44. BODIPY-diketopyrrolopyrrole-porphyrin conjugate small molecules for use in bulk heterojunction solar cells10.1039/C8TA01291A ↗
45. Modulation of the power conversion e fficiency of organic solar cells via architectural variation of a promissing non-fullerene acceptor10.1039/C7TA08533H ↗
46. Triple bond-modified anthracene sensitizers for dye-sensitized solar cells: a computational study10.1039/C5RA04408A ↗
47. Acetylene-derived strong organic acceptors for planar and nonplanar push-pull chromophores10.1021/ar8001238 ↗
48. BODIPY–diketopyrrolopyrrole–porphyrin conjugate small molecules for use in bulk heterojunction solar cells
49. BODIPY derivatives as donor materials for bulk heterojunction solar cells10.1039/b822770e ↗
50. Organic solar cells based on acceptor-functionalized diketopyrrolopyrrole derivatives10.1117/1.JPE.5.057215 ↗
51. Photovoltaic properties of a porphyrin-containing polymer as donor in bulk heterojunction solar cells with low energy loss10.1002/solr.201700168 ↗
52. Recent progress in porphyrin-based materials for organic solar cells10.1039/C8TA06392C ↗
53. A water/alcohol-soluble conjugated porphyrin small molecule as a cathode interfacial layer for efficient organic photovoltaics10.1039/C6TA05726H ↗
54. Synthesis, optical and electrochemical properties of the A-π-D-π-A porphyrin and its application as an electron donor in efficient solution processed bulk heterojunction solar cells10.1039/C4NR05565A ↗
55. Porphyrin based push-pull conjugates as donors for solution-processed bulk heterojunction solar cells: a case of metal-dependent power conversion efficiency10.1039/C7TA05338J ↗
56. Artificial light-harvesting n-type porphyrin for panchromatic organic photovoltaic devices10.1039/C7SC01275F ↗
57. Comparative study on the photovoltaic characteristics of A-D-A and D-A-D molecules based on Zn-porphyrin; a D-A-D molecule with over 8.0% efficiency10.1039/C6TA09408B ↗
58. Deep absorbing porphyrin small molecule for high-performance organic solar cells with very low energy losses10.1021/jacs.5b03740 ↗
59. Alkynyl-Functionalized pyrene-cored perylene diimide electron acceptors for efficient nonfullerene organic solar cells10.1021/acsaem.9b00611 ↗
60. Novel anthracene-core molecule for the development of efficient PCBM-based solar cells10.1021/cm703011k ↗
61. Acetylene-based materials in organic photovoltaics10.3390/ijms11041471 ↗
62. An investigation of the role acceptor side chains play in the processibility and efficiency of organic solar cells fabricated from small molecular donors featuring 3,4-ethylenedioxythiophene cores10.1039/C8RA07034B ↗
63. The importance of end groups for solution-processed small-molecule bulk-heterojunction photovoltaic cells10.1002/cssc.201501626 ↗
64. Carbazole-based linear conjugated molecules: structure-property relationships and device properties10.1039/c3ra42318b ↗
65. Intramolecular electronic coupling enhances lateral electron transfer across semiconductor interfaces10.1021/acs.jpcc.8b04836 ↗
66. Design principles of electronic couplings for intramolecular singlet fission in covalently-linked systems10.1021/acs.jpca.6b07153 ↗
67. Effects of electronic coupling and electrostatic potential on charge transport in carbon-based molecular electronic junctions10.3762/bjnano.7.4 ↗
68. Mapping the configuration dependence of electronic coupling in organic semiconductors10.1039/C5TC03765D ↗
69. Identifying the length dependence of orbital alignment and contact coupling in molecular heterojunctions10.1021/nl803814f ↗
70. Push-pull macrocycles: donor-acceptor compounds with paired linearly conjugated or cross-conjugated pathways10.1021/jo2026004 ↗
71. Molecular engineering of the band gap of π-conjugated systems: facing technological applications10.1002/marc.200700345 ↗
72. Frisch · 2009
73. Density functional theory study on D-π-A-type organic dyes containing different electron-donors for dye-sensitized solar cells10.5012/bkcs.2013.34.11.3211 ↗
74. Coplanar donor-π-acceptor dyes featuring a furylethynyl spacer for dye-sensitized solar cells10.3390/ma12050839 ↗
75. Coplanar D-π-A organic sensitizers featuring a thienylethynyl spacer for efficient dye-sensitized solar cells10.1166/mex.2017.1348 ↗
76. Solar cell efficiency , self-assembly, and Dipole−Dipole interactions of isomorphic narrow-band-gap molecules10.1021/ja3050713 ↗
77. Charge transport in a two-dimensional molecular organic semiconductor10.1039/C3TC31670J ↗
78. Controlling conformations of conjugated polymers and small molecules: the role of nonbonding interactions10.1021/ja403667s ↗