Photovoltaic performance enhancement from diketopyrrolopyrrole-based solar cells through structure manipulation
Source abstract
Abstract
Abstract Two novel donor–acceptor conjugated polymers with 5H-dithieno[3,2-b:2',3'-d]pyran as a strong electron-donating unit and diketopyrrolopyrrole as electron accepting units were synthesized. The photophysical and electrochemical properties were investigated and compared. With the same donor unit, 3,6-di(thien-2-yl)pyrrolopyrroledione-based polymer showed an almost linear spatial structure, while 3,6-di(furan-2-yl)pyrrolopyrroledione-based polymer exhibited a V-shaped structure. The power conversion efficiency of solar cells based on 3,6-di(thien-2-yl)pyrrolopyrroledione-based polymer, with a high carrier mobility benefiting from almost linear backbone of 3,6-di(thien-2-yl)pyrrolopyrroledione-based polymer, was much higher than that of photovoltaic cells based on 3,6-di(furan-2-yl)pyrrolopyrroledione-based polymer. This work demonstrated a good example for enhancing efficiency of diketopyrrolopyrrole-based solar cells by adjusting the spatial structure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
4. Large scale deployment of polymer solar cells on land, on sea and in the air10.1039/c3ee43212b ↗
5. Freely available OPV – the fast way to progress10.1002/ente.201300057 ↗
6. Roll-to-roll fabrication of large area functional organic materials10.1002/polb.23192 ↗
7. A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies10.1039/b823001c ↗
8. Poly(diketopyrrolopyrrole–terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
9. Efficient solar cells based on an easily accessible diketopyrrolopyrrole polymer10.1002/adma.201001449 ↗
10. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
11. 2,5-bis(2-octyldodecyl)pyrrolo[3,4-c]pyrrole-1,4-(2H,5H)-dione-based donor acceptor alternating copolymer bearing 5,5'-di(thiophen-2-yl)-2,2'-biselenophene exhibiting 1.5 cm2 V−1 s−1 hole mobility in thin-film transistors10.1021/ja203189h ↗
12. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications10.1002/adma.201203827 ↗
13. Design of benzodithiophene-diketopyrrolopyrrole based donor-acceptor copolymers for efficient organic field effect transistors and polymer solar cells10.1039/c2jm34004f ↗
14. New alkylfuranyl-substituted benzo[1,2-b:4,5-b']dithiophene-based donor-acceptor polymers for highly efficient solar cells10.1021/ma3025738 ↗
15. Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment10.1021/cm401618h ↗
16. Toward a rational design of poly(2,7-carbazole) derivatives for solar cells10.1021/ja0771989 ↗
17. Synthesis of 5H-dithieno[3,2-b:2',3'-d]pyran as an electron-rich building block for donor–acceptor type low-bandgap polymers10.1021/ma400452j ↗
18. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
19. Synthesis of a new ladder-type benzodi(cyclopentadithiophene) arene with forced planarization leading to an enhanced efficiency of organic photovoltaics10.1021/cm3024082 ↗
20. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b]thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
21. Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance10.1063/1.2335377 ↗
22. Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells10.1021/ja201131h ↗
23. Synthesis and photovoltaic properties of two-dimensional low-bandgap copolymers based on new benzothiadiazole derivatives with different conjugated arylvinylene side chains10.1002/chem.201200730 ↗
24. Backbone curvature in polythiophenes10.1021/cm101577j ↗
25. Influence of the backbone conformation of conjugated polymers on morphology and photovoltaic properties10.1039/C3PY01231J ↗
26. Synthesis and photovoltaic performance of low band gap copolymers based on diketopyrrolopyrrole and tetrathienoacene with different conjugated bridges10.1039/C3TA14022A ↗
27. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
28. New conjugated polymers with donor–acceptor architectures: synthesis and photophysics of carbazole-quinoline and phenothiazine-quinoline copolymers and oligomers exhibiting large intramolecular charge transfer10.1021/ma0100448 ↗
29. Synthesis and characterization of low bandgap π-conjugated copolymers incorporating 4,7-bis(3,3′/4,4′-hexylthiophene-2-yl)benzo[c][2,1,3]thiadiazole units for photovoltaic application10.1039/c3ta11433c ↗
30. Controlling blend film morphology by varying alkyl side chain in highly coplanar donor acceptor copolymers for photovoltaic application10.1021/ma201009n ↗
31. Alternating copolymers based on 2,1,3-benzothiadiazole and hexylthiophene: positioning effect of hexyl chains on the photophysical and electrochemical properties10.1002/ejoc.201100182 ↗
32. Improved power conversion efficiency of bulk-heterojunction organic solar cells using a benzothiadiazole-triphenylamine polymer10.1039/C2JM14671A ↗
33. PDT-S-T: a new polymer with optimized molecular conformation for controlled aggregation and π–π stacking and its application in efficient photovoltaic devices10.1002/adma.201301174 ↗
34. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
35. Synthesis and characterization of new red-emitting polyfluorene derivatives containing electron-deficient 2-pyran-4-ylidene-malononitrile moieties10.1021/ma0355397 ↗
36. Synthesis and electroluminescent properties of copolymers based on fluorene and 2,5-di(2-hexyloxyphenyl)thiazolothiazole10.1021/ma050378n ↗
37. Incorporation of furan into low band-gap polymers for efficient solar cells10.1021/ja108115y ↗
38. Synthesis and characterization of bis(3,4-ethylene-dioxythiophene)-(4,4'-dialkyl-2,2'-bithiazole) co-oligomers for electronic applications10.1021/cm020774+ ↗
39. Efficient small molecule bulk heterojunction solar cells with high fill factors via introduction of π-stacking moieties as end group10.1039/C2TA00496H ↗
40. Impact of isomeric structures on transistor performances in naphthodithiophene semiconducting polymers10.1021/ja201591a ↗
41. Linear- and angular-shaped naphthodithiophenes: selective synthesis, properties, and application to organic field-effect transistors10.1021/ja110973m ↗
42. Recent advances in high mobility donor-acceptor semiconducting polymers10.1039/c2jm31943h ↗
43. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
44. A comparative study of diketopyrrolopyrrole and isoindigo based polymers for organic photovoltaic applications10.1016/j.dyepig.2014.03.002 ↗