journal article·2025-04

Shamrock-shaped nonfullerene acceptors containing nonhalogenated end groups for high-voltage organic photovoltaics

Fuli Xie, Xiangyu Li, Zongtao Wang, Mengzhen Du, Mengwei Ji, Jimin Du, Peiqing Cong, Qing Guo, Erjun Zhou

Dyes and Pigments· Volume 235
Publisher page

Abstract

Rapidly substantial progress with power conversion efficiency (PCE) over 19% for organic photovoltaics (OPVs) has been achieved contributed to the advent of exceptional-performance banana-shaped Y-series nonfullerene acceptors (NFAs). However, the open-circuit voltages (VOCs) of these high-efficiency materials are typically lower than 1.0 V due to the relatively low LUMO energy level. Therefore, developing new material systems simultaneously possessing high VOC and PCE has consistently been a focal research. Recently, our groups successfully obtained a novel A-DA'D-A type shamrock-shaped NFA via utlizing large conjugated acenaphtho[1,2-b]quinoxaline imide (AQI) unit as central core (A') and fluorinated-IC as end groups, which exhibited a PCE of 18% with a VOC of 0.95 V. To further extend the familly of shamrock-shaped NFAs and upgrade their photovoltaic properties, herein, another new shamrock-shaped NFA containing non-halogenated end group IC was synthesized and named as AQI1. The reasonable cooperation of AQI and IC could facilitate to obtain upshifted LUMO energy level, resulting in a decreased energy loss in OPVs. Using classic p-type polymer PM6 and a benzotriazole-based linear polymer PE4 as donors, both devices can achieve high VOC of 1.06 V and 1.04 V respectively. Finally, PM6:AQI1 and PE4:AQI1 combinations realized PCEs of 11.1% and 13.7% respectively, suggesting that benzotriazole-based polymers might be better choice to blend with shamrock-shaped NFAs. These results indicate that shamrock-shaped NFAs with nonhalogenated end groups may be a feasible and potential design strategy to achieve low-cost and high-VOC OPVs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells10.1039/C7CS00892A ↗
2. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
3. In situ absorption characterization guided slot‐die‐coated high‐performance large‐area flexible organic solar cells and modules10.1002/adma.202209030 ↗
4. Benzotriazole‐based D–π–A‐type photovoltaic polymers break through 17% efficiency10.1002/aenm.202302429 ↗
5. Revealing the effect of halogenation strategy on the regulation of crystallization kinetics and molecular packing for high‐performance organic solar cells
6. Semi-transparent organic photovoltaics10.1039/D3CS00233K ↗
7. P‐type polymers in semitransparent organic photovoltaics10.1002/anie.202307622 ↗
8. Optical and electrical losses in semitransparent organic photovoltaics10.1016/j.joule.2023.12.011 ↗
9. In situ self‐assembly of trichlorobenzoic acid enabling organic photovoltaics with approaching 19% efficiency
10. Feng Liu Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
11. Fibrillization of non‐fullerene acceptors enables 19% efficiency pseudo‐bulk heterojunction organic solar cells
12. Single‐Junction organic photovoltaic cell with 19% efficiency10.1002/adma.202102420 ↗
13. Restrained energetic disorder for high-efficiency organic solar cells via a solid additive10.1039/D3EE00927K ↗
14. Saddle‐shaped third component with out‐of‐plane electrostatic dipole for realizing high‐performance photovoltaic donor terpolymers10.1002/adma.202301732 ↗
15. Elucidating end-group modifications of carbazole-based nonfullerene acceptors in indoor applications for achieving a PCE of over 2010.1021/acsami.1c06360 ↗
16. Pi-extended nonfullerene acceptor for compressed molecular packing in organic solar cells to achieve over 20% efficiency10.1021/jacs.4c01503 ↗
17. Rational molecular and device design enables organic solar cells approaching 20% efficiency10.1038/s41467-024-46022-3 ↗
18. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
19. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
20. Achieving over 15% efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
21. Reduced energy loss enabled by a chlorinated thiophene‐fused ending‐group small molecular acceptor for efficient nonfullerene organic solar cells with 13.6% efficiency10.1002/aenm.201900041 ↗
22. Non‐radiative recombination energy losses in non‐fullerene organic solar cells
23. Benzo[1,2-b:4,5-b′]diselenophene-fused nonfullerene acceptors with alternative aromatic ring-based and monochlorinated end groups: a new synergistic strategy to simultaneously achieve highly efficient organic solar cells with the energy loss of 0.49 eV10.1039/C9TA03177D ↗
24. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
25. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
26. Importance of electron transport ability in naphthalene diimide-based polymer acceptors for high-performance, additive-free, all-polymer solar cells10.1021/acs.chemmater.5b01274 ↗
27. A simple perylene diimide derivative with a highly twisted geometry as an electron acceptor for efficient organic solar cells10.1039/C6TA04232E ↗
28. Perylene diimide-fused dithiophenepyrroles with different end groups as acceptors for organic photovoltaics10.1021/acsami.2c06135 ↗
29. Twisted-graphene-like perylene diimide with dangling functional chromophores as tunable small-molecule acceptors in binary-blend active layers of organic photovoltaics10.1039/D1TA90197D ↗
30. A new ladder-type benzodi(cyclopentadithiophene)-based donor–acceptor polymer and a modified hole-collecting PEDOT:PSS layer to achieve tandem solar cells with an open-circuit voltage of 1.62 V10.1039/c3cc43756f ↗
31. Single-Junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
32. Binary alloy of functionalized small-molecule acceptors with the A–DA ′ D–A structure for ternary-blend photovoltaics displaying high open-circuit voltages and efficiencies10.1039/D2TA04800K ↗
33. Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell10.1039/D0EE00862A ↗
34. A polymer acceptor with double-decker configuration enhances molecular packing for high-performance all-polymer solar cells10.1016/j.joule.2024.06.010 ↗
35. Tailoring cyano substitutions on quinoxaline‐based small‐molecule acceptors enabling enhanced molecular packing for high‐performance organic solar cells10.1002/aenm.202400285 ↗
36. Synergistic effect of benzoselenadiazole core and alkoxy side chain substitution on the photovoltaic performance of non-fullerene acceptors10.1039/D3TA04364A ↗
37. 17.1 %‐Efficient eco‐compatible organic solar cells from a dissymmetric 3D network acceptor10.1002/anie.202013053 ↗
38. Unveiling structure-performance relationships from multi-scales in non-fullerene organic photovoltaics10.1038/s41467-021-24937-5 ↗
39. An efficient alkoxy-substituted polymer acceptor for efficient all-polymer solar cells with low voltage loss and versatile photovoltaic applications10.1039/D4EE01804D ↗
40. Precisely controlling polymer acceptors with weak intramolecular charge transfer effect and superior coplanarity for efficient indoor all-polymer solar cells with over 27% efficiency10.1002/adma.202405404 ↗
41. The development of A-DA’D-A type nonfullerene acceptors containing non-halogenated end groups10.1007/s12274-023-5693-z ↗
42. Simultaneous tuning of alkyl chains and end groups in non-fused ring electron acceptors for efficient and stable organic solar cells10.1021/acsami.2c03723 ↗
43. Asymmetric glycolated substitution for enhanced permittivity and ecocompatibility of high-performance photovoltaic electron acceptor10.1021/jacsau.1c00306 ↗
44. Recent progress of Y6‐derived asymmetric fused ring electron acceptors
45. Binary organic solar cells with 19.2% efficiency enabled by solid additive
46. Tandem organic solar cells with 20.6% efficiency enabled by reduced voltage losses10.1093/nsr/nwad085 ↗
47. Shamrock-shaped non-fullerene acceptors enable high-efficiency and high-voltage organic photovoltaics10.1039/D4EE00540F ↗
48. Fluorinated fused nonacyclic interfacial materials for efficient and stable perovskite solar cells10.1039/C7TA06923E ↗
49. Effect of number and position of chlorine atoms on the photovoltaic performance of asymmetric nonfullerene acceptors10.1021/acsami.3c15518 ↗
50. Thieno[3,2-b]pyrrolo-Fused pentacyclic benzotriazole-based acceptor for efficient organic photovoltaics10.1021/acsami.7b10995 ↗
51. Fused benzothiadiazole: a building block for n‐type organic acceptor to achieve high‐performance organic solar cells10.1002/adma.201807577 ↗
52. Achieving 14.11% efficiency of ternary polymer solar cells by simultaneously optimizing photon harvesting and exciton distribution10.1039/C9TA01497G ↗
53. A new non-fullerene acceptor based on the heptacyclic benzotriazole unit for efficient organic solar cells10.1016/j.jechem.2019.07.002 ↗
54. Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor10.1016/j.nanoen.2021.106538 ↗
55. Effect of terminal electron-withdrawing group on the photovoltaic performance of asymmetric fused-ring electron acceptors10.1021/acsami.2c10557 ↗
56. J Comput Chem · 2011 · 33 · 580
57. Benzotriazole‐based 3D four‐arm small molecules enable 19.1 % efficiency for PM6 : Y6‐based ternary organic solar cells
58. Dicyclopentadithienothiophene-based non-fullerene acceptors for ternary blend organic photovoltaics10.1039/D3TC04294D ↗
59. Improved blend film morphology and free carrier generation provide a high-performance ternary polymer solar cell10.1021/acsami.0c19198 ↗
60. Capacitance spectroscopy for quantifying recombination losses in nonfullerene small‐molecule bulk heterojunction solar cells10.1002/aenm.201502250 ↗
61. A highly efficient non‐fullerene organic solar cell with a fill factor over 0.80 enabled by a fine‐tuned hole‐transporting layer10.1002/adma.201801801 ↗
62. Enhancing open-circuit voltage and suppression of energy loss in ternary organic photovoltaics utilizing carbazole/bicarbazole-based guest donors10.1016/j.cej.2024.153183 ↗
63. Indolocarbazole-based small molecules as guest donors for High-Performance ternary organic photovoltaics10.1016/j.cej.2023.143938 ↗
64. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗