Effect of polymer molecular weight and processing solvent on the morphology and photovoltaic performance of inverted non-fullerene solar cells
Source abstract
Abstract
Abstract Nonfullerene acceptors (NFAs) usually exhibit narrower bandgaps and stronger aggregation than fullerene derivatives, so donor polymers compatible with NFAs to achieve high-performance photoelectric conversion are presently limited to only several popular examples. To boost the device efficiency without changing the molecular structure of the material, we investigate the influence of polymer's molecular weights on the photovoltaic performance of polymer solar cells (PSCs). It was found that the molecular weight of a typical donor polymer (PBDB-T) can significantly impact on the film microstructure, charge transport and device performance of NFA based PSCs. Moreover, we find that changing the processing solvent exerts various impacts on the trend of the influence of molecular weight upon the performance of the device. Polymers with both a high and a low molecular weight can demonstrate a comparable photoelectric conversion efficiency, depending on what kind of processing solvent is used. It is concluded that in order to obtain a better morphology, charge carrier mobility and high device efficiency, polymers with a high molecular weight prefer to choose a solvent with a better solubility, while the ones with a low molecular weight would rather use a solvent with a weaker solubility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
2. Over 16% efficiency from thick-film organic solar cells10.1016/j.scib.2020.08.027 ↗
3. Noncovalently fused-ring electron acceptors with near-infrared absorption for high-performance organic solar cells10.1038/s41467-019-11001-6 ↗
4. A fully non-fused ring acceptor with planar backbone and near-IR absorption for high performance polymer solar cells10.1002/anie.202010856 ↗
5. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
6. Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors10.1038/s41467-019-08508-3 ↗
7. Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model10.1039/C9EE03710A ↗
8. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
9. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
10. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
11. Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization10.1007/s11426-016-0198-0 ↗
12. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
13. High-efficiency organic solar cells with low non-radiative recombination loss and low energetic disorder10.1038/s41566-019-0573-5 ↗
14. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
15. 15.3% efficiency all-small-molecule organic solar cells enabled by symmetric phenyl substitution10.1007/s40843-020-1269-9 ↗
16. Benzothiadiazole-based conjugated polymers for organic solar cells10.1007/s10118-021-2537-8 ↗
17. Side-chains engineering of conjugated polymers toward additive-free non-fullerene organic solar cells10.1007/s10118-020-2490-y ↗
18. Advances in solution-processed all-small-molecule organic solar cells with non-fullerene electron acceptors10.3866/PKU.WHXB201803271 ↗
19. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
20. Tackling performance challenges in organic photovoltaics: an overview about compatibilizers10.3390/molecules25092200 ↗
21. Small molecule acceptors with a ladder-like core for high-performance organic solar cells with low non-radiative energy losses10.1039/D0TA03683H ↗
22. Increasing N2200 charge transport mobility to improve performance of all polymer solar cells by forming a percolation network structure10.3389/fchem.2020.00394 ↗
23. Controlling solution-phase polymer aggregation with molecular weight and solvent additives to optimize polymer-fullerene bulk heterojunction solar cells10.1002/aenm.201301733 ↗
24. Detecting the onset of molecular reorganization in conjugated polymer thin films using an easily accessible optical method10.1021/acs.macromol.9b00606 ↗
25. Importance of critical molecular weight of semicrystalline n-type polymers for mechanically robust, efficient electroactive thin films10.1021/acs.chemmater.8b05114 ↗
26. Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells10.1021/cm047811c ↗
27. Molecular weight dependent vertical composition profiles of PCDTBT:PC71BM blends for organic photovoltaics10.1038/srep05286 ↗
28. Fluorination effects on indacenodithienothiophene acceptor packing and electronic structure, end-group redistribution, and solar cell photovoltaic response10.1021/jacs.8b13653 ↗
29. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
30. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
31. Efficient all-polymer solar cells based on a new polymer acceptor achieving 10.3% power conversion efficiency10.1021/acsenergylett.8b02114 ↗
32. Fullerene-Free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
33. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
34. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
35. Simple non-fused electron acceptors for efficient and stable organic solar cells10.1038/s41467-019-10098-z ↗
36. Large-area organic solar cells: material requirements, modular designs, and printing methods10.1002/adma.201970324 ↗
37. Unraveling the microstructure-related device stability for polymer solar cells based on nonfullerene small-molecular acceptors10.1002/adma.201908305 ↗
38. 17.1% efficient single-junction organic solar cells enabled by n-type doping of the bulk-heterojunction10.1002/advs.201903419 ↗
39. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗
40. Design rules for donors in bulk‐heterojunction solar cells—towards 10% energy‐conversion efficiency10.1002/adma.200501717 ↗
41. Effect of molecular weight on the structure and crystallinity of poly (3-hexylthiophene)10.1021/ma0521349 ↗
42. Efficient organic solar cells processed from hydrocarbon solvents
43. Open circuit voltage of organic solar cells: an in-depth review10.1039/C5EE02871J ↗