Difluoroterthiophene as promising block to build highly planar conjugated polymer for polymer photovoltaic cells
Source abstract
Abstract
Abstract Developing highly planar semiconducting polymer is essential for achieving high mobility and improving the photovoltaic performance of bulk-heterojunction polymer solar cells. In this contribution, two novel low-bandgap donor-acceptor copolymers, P1-3T and P2-3T2F, consisting of electron-accepting benzothiadiazole acceptor segment and electron-donating terthiophene donor segment with and without fluorine atoms were designed and synthesized. The density functional theory calculations and ultraviolet–visible absorption studies demonstrate that the fluorinated P2-3T2F polymer has more planar backbone conformation, deeper HOMO level, broader absorption spectrum with a vibronic shoulder peak, and higher absorption coefficient compared with the non-fluorinated analogue polymer, P1-3T. Furthermore, P2-3T2F exhibits good crystallinity and high hole mobility, presumably due to the well-ordered lamellar packing and the π-π stacking interaction between the backbones of the conjugated polymers. The optimized polymer solar cell based on P2-3T2F:PC61BM exhibits a short-circuit current density (Jsc) of 12.77 mA cm−2, a fill factor (FF) of 68.99%, an open-circuit voltage (Voc) of 0.80 V, and a maximum power conversion efficiency (PCE) of 7.14%, which is approximately 46% higher than that of the P1-3T:PC61BM device. The enhanced PCE is primarily due to increased light-harvesting ability and interconnected morphology with finely dispersed polymer-rich and PC61BM-rich domains, which improves the efficiency of exciton dissociation and rises the mobility of charge carriers, thus boosting the short-circuit current density and the FF value. Moreover, the relatively deep HOMO of P2-3T2F effectively increases the Voc.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Electron transporting semiconducting polymers in organic electronics10.1039/c0cs00194e ↗
2. π-Conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
3. Synthesis of light-emitting conjugated polymers for applications in electroluminescent devices10.1021/cr000013v ↗
4. Design and effective synthesis methods for high-performance polymer semiconductors in organic field-effect transistors10.1039/C7QM00169J ↗
5. Low-bandgap donor-acceptor polymers for photodetectors with photoresponsivity from 300 nm to 1600 nm10.1039/C6TC05031J ↗
6. Low bandgap semiconducting polymers for polymeric photovoltaics10.1039/C5CS00650C ↗
7. Recent advances in wide bandgap semiconducting polymers for polymer solar cells10.1039/C6TA09325F ↗
8. Recent progress in thermoelectric materials based on conjugated polymers10.3390/polym11010107 ↗
9. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
10. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
11. Structures and properties of conjugated Donor-Acceptor copolymers for solar cell applications10.1039/c2jm14951f ↗
12. Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells10.1039/C4CS00250D ↗
13. An extremely narrow-band-gap conjugated polymer with heterocyclic backbone and its use in optoelectronic devices10.1002/marc.200600237 ↗
14. Poly(oligothiophene-alt-benzothiadiazole)s: tuning the structures of oligothiophene units toward high-mobility “black” conjugated polymers10.1021/ma900906t ↗
15. Design and synthesis of alternating regioregular oligothiophenes/benzothiadiazole copolymers for organic solar cells10.1021/ma900968f ↗
16. Efficient synthesis of benzo[1,2- b:6,5- b’]dithiophene-4,5-dione (BDTD) and its chemical transformations into precursors for π-conjugated materials10.1021/ol302704v ↗
17. Comparative study of the conformational effect of dithienothiophene- and terthiophene-based photovoltaic polymers10.1039/C6TC04203A ↗
18. Ladder-type heteroarene-based organic semiconductors10.1002/asia.201800860 ↗
19. Conjugated polymer consisting of quinacridone and benzothiadiazole as donor materials for organic photovoltaics: coplanar property of polymer backbone10.1021/ma301466m ↗
20. Advances in molecular design and synthesis of regioregular polythiophenes10.1021/ar800130s ↗
21. Regioregular narrow-bandgap-conjugated polymers for plastic electronics10.1038/ncomms14047 ↗
22. Charge mobility enhancement for conjugated DPP-selenophene polymer by simply replacing one bulky branching alkyl chain with linear one at each DPP unit10.1021/acs.chemmater.8b01007 ↗
23. Significant improvement of unipolar n-type transistor performances by manipulating the coplanar backbone conformation of electron-deficient polymers via hydrogen bonding10.1021/jacs.8b12499 ↗
24. Organic and polymeric semiconductors enhanced by noncovalent conformational locks10.1021/acs.chemrev.7b00084 ↗
25. Locking the coplanar conformation of π-conjugated molecules and macromolecules using dynamic noncovalent bonds10.1002/marc.201700241 ↗
26. The curious case of fluorination of conjugated polymers for solar cells10.1021/acs.accounts.7b00326 ↗
27. Impact of backbone fluorination on π-conjugated polymers in organic photovoltaic devices: a review10.3390/polym8010011 ↗
28. Fluorination of polythiophene derivatives for high performance organic photovoltaics10.1021/cm502229k ↗
29. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7% efficiency10.1002/anie.201005451 ↗
30. Comparison of two D-A type polymers with each being fluorinated on D and A unit for high performance solar cells10.1002/adfm.201402210 ↗
31. Investigation of fluorination on donor moiety of donor-acceptor 4,7-dithienylbenzothiadiazole-based conjugated polymers toward enhanced photovoltaic efficiency10.1021/acsami.6b08233 ↗
32. Synthesis and charge transport properties of conjugated polymers incorporating difluorothiophene as a building block10.1021/acs.macromol.5b00369 ↗
33. High bulk electron mobility diketopyrrolopyrrole copolymers with perfluorothiophene10.1002/adfm.201404540 ↗
34. Thiophene fluorination to enhance photovoltaic performance in low band gap donor–acceptor polymers10.1039/c2cc35079c ↗
35. Wide band-gap 3,4-difluorothiophene-based polymer with 7% solar cell efficiency: an alternative to P3HT10.1021/acs.chemmater.5b01520 ↗
36. Thieno[3,4-c]pyrrole-4,6-dione-3,4-difluorothiophene polymer acceptors for efficient all-polymer bulk heterojunction solar cells10.1002/anie.201604307 ↗
37. Isoindigo-3,4-Difluorothiophene polymer acceptors yield “all-polymer” bulk-heterojunction solar cells with over 7 % efficiency10.1002/anie.201709509 ↗
38. Utilizing difluorinated thiophene units to improve the performance of polymer solar cells10.1021/acs.macromol.9b01168 ↗
39. Phenanthrodithiophene-isoindigo copolymers: effect of side chains on their molecular order and solar cell performance10.1021/acs.macromol.5b00622 ↗
40. Photophysical and electrochemical properties of π-extended molecular 2,1,3-benzothiadiazoles10.1016/j.tet.2005.08.093 ↗
41. Hybrid functionals based on a screened Coulomb potential10.1063/1.1564060 ↗
42. A new hybrid exchange-correlation functional using the Coulomb-attenuating method (CAM-B3LYP)10.1016/j.cplett.2004.06.011 ↗