journal article·2021-03

Exploring the fluorination effect on photophysical and photovoltaic properties of Benzo[1,2-c:4,5-c′]dithiophene-4,8-dione copolymers

Xiao Zhang, Jiapeng Wu, Donghui Wei, Yunhao Cai, Xiaobo Sun

Dyes and Pigments· Volume 187
Publisher page

Abstract

Abstract Fluorination exhibits multiple effects on the photophysical properties of conjugated copolymers and has attracted enormous attention in organic solar cells (OSCs). Herein, a series of structurally identical benzo[1,2-c:4,5-c′]dithiophene-4,8-dione (T1) based polymers (named PPhF0-T1 to PPhF4-T1) with different numbers of fluorine substitutions have been designed and synthesized. With the number of fluorine substitution increases, the energy levels of the polymers decrease gradually. ITPTC non-fullerene acceptor was employed to fabricate OSCs with these polymers. We found that the introduction of fluorine can effectively improve the open-circuit voltage of the device. Upon one or two fluorine atoms are appended to the polymer, the corresponding short-circuit currents (Jscs) are obviously promoted. However, due to the excessive phase separation and hence suppressed charge carrier mobility, the Jsc decreases when there are four fluorine atoms in the polymer. Consequently, without any additives, the PPhF2-T1 based device gives the highest power conversion efficiency of 10.61%, which is much higher than that of nonfluorinated polymer based OSC (3.97%). This work presents a systematic study upon the effect of different numbers of fluorine atoms on the photovoltaic performance of OSCs, which may serve as a useful guideline in the design of efficient conjugated polymers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
4. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
5. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
6. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
7. Small-Molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
8. Non-fullerene polymer solar cells based on alkylthio and fluorine substituted 2D-conjugated polymers reach 9.5% efficiency10.1021/jacs.6b01744 ↗
9. Oligomeric donor material for high-efficiency organic solar cells: breaking down a polymer10.1002/adma.201501491 ↗
10. A difluorobenzoxadiazole building block for efficient polymer solar cells10.1002/adma.201504611 ↗
11. Yuan · Joule · 2019 · 3 · 114010.1016/j.joule.2019.01.004 ↗
12. Cui · Nat Commun · 2019 · 10 · 251510.1038/s41467-019-10351-5 ↗
13. Zhan · Energy Environ Sci · 2020 · 13 · 63510.1039/C9EE03710A ↗
14. Lin · Adv Mater · 2019 · 31 · 190296510.1002/adma.201902965 ↗
15. Sun · J Am Chem Soc · 2020 · 142 · 146510.1021/jacs.9b09939 ↗
16. Sun · Nature Electronics · 2019 · 2 · 51310.1038/s41928-019-0315-1 ↗
17. Liu · Sci Bull · 2020 · 65 · 27210.1016/j.scib.2020.01.001 ↗
18. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
19. Synthesis and photovoltaic properties of bithiazole-based donor-acceptor copolymers10.1021/ma100767b ↗
20. Fluorinated copolymer PCPDTBT with enhanced open-circuit voltage and reduced recombination for highly efficient polymer solar cells10.1021/ja305039j ↗
21. 2,1,3-Benzothiadiazole-5,6-Dicarboxylic imide - a versatile building block for additive- and annealing-free processing of organic solar cells with efficiencies exceeding 8%10.1002/adma.201404858 ↗
22. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
23. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
24. Chlorination of low-band-gap polymers: toward high-performance polymer solar cells10.1021/acs.chemmater.6b04828 ↗
25. Optimizing the performance of conjugated polymers in organic photovoltaic cells by traversing group 1610.1021/ma501236v ↗
26. Side chain structure affects the photovoltaic performance of two-dimensional conjugated polymers10.1021/ma401897b ↗
27. Germaniumand silicon substituted donor–acceptor type copolymers: effect of the bridging heteroatom on molecular packing and photovoltaic device performance10.1002/aenm.201400527 ↗
28. Investigating the effect of heteroatom substitution in 2,1,3-benzoxadiazole and 2,1,3-benzothiadiazole compounds for organic photovoltaics10.1039/C7TC05075E ↗
29. Influence of aromatic heterocycle of conjugated side chains on photovoltaic performance of benzodithiophene-based wide-bandgap polymers10.1039/C6PY00640J ↗
30. Fluorinated organic materials for electronic and optoelectronic applications: the role of the fluorine atom10.1039/B611336B ↗
31. The curious case of fluorination of conjugated polymers for solar cells10.1021/acs.accounts.7b00326 ↗
32. Investigation of fluorination on donor moiety of donor−acceptor 4,7-dithienylbenzothiadiazole-based conjugated polymers toward enhanced photovoltaic efficiency10.1021/acsami.6b08233 ↗
33. Effect of fluorine substitution on photovoltaic performance of DPP-based copolymer10.1016/j.orgel.2015.02.008 ↗
34. Impact of the number of fluorine atoms on crystalline, physicochemical and photovoltaic properties of low bandgap copolymers based on 1,4-dithienylphenylene and diketopyrrolopyrrole10.1016/j.polymer.2017.08.018 ↗
35. Investigation of fluorination on donor moiety of donor-acceptor 4,7-dithienylbenzothiadiazole-based conjugated polymers toward enhanced photovoltaic efficiency10.1021/acsami.6b08233 ↗
36. Synthesis of fluorinated polythienothiophene-co-benzodithiophenes and effect of fluorination on the photovoltaic properties10.1021/ja108601g ↗
37. Side chain influence on the morphology and photovoltaic performance of 5-Fluoro-6-alkyloxybenzothiadiazole and benzodithiophene based conjugated polymers10.1021/acsami.5b00026 ↗
38. A fluorinated phenylene unit as a building block for high-performance n-type semiconducting polymer10.1002/adma.201205320 ↗
39. A fluorinated polythiophene derivative with stabilized backbone conformation for highly efficient fullerene and non-fullerene polymer solar cells10.1021/acs.macromol.6b00248 ↗
40. Fluorinated thiophene units improve photovoltaic device performance of Donor−Acceptor copolymers10.1021/acs.chemmater.7b01683 ↗
41. Implication of fluorine atom on electronic properties, ordering structures, and photovoltaic performance in naphthobisthiadiazole-based semiconducting polymers10.1021/jacs.6b05418 ↗
42. Recent advances in wide-bandgap photovoltaic polymers10.1002/adma.201605437 ↗
43. PBDB-T and its derivatives: a family of polymer donors enables over 17% efficiency in organic photovoltaics10.1016/j.mattod.2019.10.023 ↗
44. Synthesis, properties, and photovoltaic performances of donor–acceptor copolymers having dioxocycloalkene-annelated thiophenes as acceptor monomer units10.1021/ma300742r ↗
45. Near-infrared electron acceptors with fluorinated regioisomeric backbone for highly efficient polymer solar cells10.1002/adma.201803769 ↗
46. Donor-acceptor conjugated copolymers containing difluorothienylethylene-bridged methyleneoxindole or methyleneazaoxindole acceptor units: synthesis, properties, and their application in field-effect transistors10.1021/acs.macromol.8b01297 ↗
47. A novel thiophene‐fused ending group enabling an excellent small molecule acceptor for high‐performance fullerene‐free polymer solar cells with 11.8% efficiency10.1002/solr.201700044 ↗
48. Intensity dependence of current–voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
49. Light intensity dependence of open-circuit voltage of polymer:fullerene solar cells10.1063/1.1889240 ↗
50. Nanoscale morphology of high-performance polymer solar cells10.1021/nl048120i ↗
51. Construction of A Long range P/N heterojunction with A pair of nanometre-wide continuous D/A phases10.1039/c1nr10410a ↗
52. Fibril network strategy enables high-performance semitransparent organic solar cells10.1002/adfm.202002181 ↗
53. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
54. Record high hole mobility in polymer semiconductors via side-chain engineering10.1021/ja405112s ↗
55. Quinoline-flanked diketopyrrolopyrrole copolymers breaking through electron mobility over 6 cm2V−1s−1in flexible thin film devices10.1002/adma.201704843 ↗