Exploring thieno[3,4-c]pyrrole-4,6-dione combined thiophene as π-bridge to construct non-fullerene acceptors with high VOC beyond 1.0 V
Source abstract
Abstract
Abstract Thieno[3,4-c]pyrrole-4,6-dione (TPD) unit has been widely used to construct a great deal of D-π-A p-type copolymers due to its strong electron-deficient property. However, there are limited reports on the TPD-based n-type materials, particularly small molecule non-fullerene acceptors (NFAs), mainly due to the time-consuming synthetic routes. Herein, two new TPD-based NFAs named as TPD-Th1 and TPD-Th3 were successfully obtained, adopting indacenodithiophene (IDT) as the central core and rhodanine (R) or 2-(1,1-dicyanomethylene)rhodanine (RCN) as the terminal electron-withdrawing unit. Both TPD-Th1 and TPD-Th3 exhibit highly planar structure due to the intramolecular noncovalently conformational locking between the O atom on the TPD unit and H atoms of two neighboring thiophene ring. The optimized PTB7-Th:TPD-Th3 photovoltaic devices show a much higher power conversion efficiency (PCE) of 5.53% in comparison with PTB7-Th:TPD-Th1 (PCE = 0.62%). The latter lower PCE could be attributed to the unmatched LUMO energy levels. Our results open a unique way to utilize TPD to construct small molecule NFAs to achieve a relatively high VOC and PCE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Fullerene Chemistry and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. 25th Anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
4. Bulk heterojunction solar cells: morphology and performance relationships10.1021/cr400353v ↗
5. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
6. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
7. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
8. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
9. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
10. Integrated molecular, interfacial, and device engineering towards high-performance non-fullerene based organic solar cells10.1002/adma.201401992 ↗
11. High-performance non-fullerene polymer solar cells based on a pair of donor–acceptor materials with complementary absorption properties10.1002/adma.201502775 ↗
12. High-efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadiazole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
13. Visible sensitization for non-fullerene polymer solar cells using a wide bandgap polymer10.2494/photopolymer.31.177 ↗
14. Quadrupolar D–A–D diketopyrrolopyrrole-based small molecule for ternary blend polymer solar cells10.1016/j.dyepig.2018.05.048 ↗
15. Improvement of exciton collection and light-harvesting range in ternary blend polymer solar cells based on two non-fullerene acceptors
16. Various roles of dye molecules in organic ternary blend solar cells10.1016/j.dyepig.2020.108231 ↗
17. An electron acceptor based on indacenodithiophene and 1,1-dicyanomethylene-3-indanone for fullerene-free organic solar cells10.1039/C4TA06004K ↗
18. Nonfullerene acceptors with enhanced solubility and ordered packing for high-efficiency polymer solar cells10.1021/acsenergylett.8b00928 ↗
19. A Thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
20. Poly(3-hexylthiophene)-based non-fullerene solar cells achieve high photovoltaic performance with small energy loss10.1039/C7TA05108E ↗
21. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
22. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
23. Highly efficient ternary-blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance10.1002/adma.201704271 ↗
24. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
25. Non-fullerene acceptors with A2=A1-D-A1=A2 skeleton containing benzothiadiazole and thiazolidine-2,4-dione for high-performance P3HT-based organic solar cells
26. P3HT-based photovoltaic cells with a high Voc of 1.22 V by using a benzotriazole-containing nonfullerene acceptor end-capped with thiazolidine-2,4-dione10.1021/acsmacrolett.7b00097 ↗
27. Achievement of high Voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
28. The introduction of fluorine and sulfur atoms into benzotriazole-based p-type polymers to match with a benzotriazole-containing n-type small molecule: “the same-acceptor-strategy” to realize high open-circuit voltage10.1002/aenm.201801582 ↗
29. Quinoxaline-containing nonfullerene small-molecule acceptors with a linear A2-A1-D-A1-A2 skeleton for poly(3-hexylthiophene)-based organic solar cells10.1021/acsami.8b00216 ↗
30. The first thieno[3,4-b]pyrazine based small molecular acceptor with a linear A2–A1–D–A1–A2 skeleton for fullerene-free organic solar cells with a high Voc of 1.05 V10.1039/C8CC06198J ↗
31. Non-fullerene acceptors with a thieno[3,4-c]pyrrole-4,6-dione (TPD) core for efficient organic solar cells10.1007/s10118-019-2309-x ↗
32. Bithiopheneimide–dithienosilole/dithienogermole copolymers for efficient solar cells: information from structure–property–device performance correlations and comparison to thieno[3,4-c]pyrrole-4,6-dione analogues10.1021/ja3081583 ↗
33. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
34. Well-controlled thieno[3,4-c]pyrrole-4,6-(5H)-dione based conjugated polymers for high performance organic photovoltaic cells with the power conversion efficiency exceeding 9%10.1039/C5EE01627D ↗
35. High-performance fullerene-free polymer solar cells featuring efficient photocurrent generation from dual pathways and low nonradiative recombination loss10.1021/acsenergylett.8b01824 ↗
36. Boosting the performance of non-fullerene organic solar cells via cross-linked donor polymers design10.1021/acs.macromol.8b02526 ↗
37. New n-type copolymers based on pentafluorobenzene-substituted thieno[3,4-c]pyrrole-4,6-dione for all-polymer solar cells10.1080/10601325.2015.1080095 ↗
38. Thieno[3,4-c]pyrrole-4,6-dione-3,4-difluorothiophene polymer acceptors for efficient all-polymer bulk heterojunction solar cells10.1002/anie.201604307 ↗
39. Thieno[3,4-c]pyrrole-4,6-dione-based polymer acceptors for high open-circuit voltage all-polymer solar cells10.1002/aenm.201602574 ↗
40. Direct (hetero)arylation for the synthesis of molecular materials: coupling thieno[3,4-c]pyrrole-4,6-dione with perylene diimide to yield novel non-fullerene acceptors for organic solar cells10.3390/molecules23040931 ↗
41. Dual imide-functionalized unit-based regioregular D-A1-D-A2 polymers for efficient unipolar n-channel organic transistors and all-polymer solar cells10.1021/acsami.9b05537 ↗
42. Imide‐functionalized heteroarene‐based n‐type terpolymers incorporating intramolecular noncovalent sulfur···oxygen interactions for additive‐free all‐polymer solar cells10.1002/adfm.201903970 ↗
43. Linked-acceptor type conjugated polymer for high performance organic photovoltaics with an open-circuit voltage exceeding 1 V10.1002/advs.201500021 ↗
44. Synthesis of donor–acceptor conjugated polymers based on benzo[1,2-b:4,5-b′]dithiophene and 2,1,3-benzothiadiazole via direct arylation polycondensation: towards efficient C–H activation in nonpolar solvents10.1039/C4PY00565A ↗
45. Simple non-fused electron acceptors for efficient and stable organic solar cells10.1038/s41467-019-10098-z ↗