journal article·2019-02

Oligo(ethylene oxide) chains in fluorene bridge units of perylenediimide dimers as an efficient strategy for improving the photovoltaic performance in organic solar cells

Joana Farinhas, Desiré Molina, Ana Olcina, Cristiana Costa, Luís Alcácer, Fernando Fernández-Lázaro, Ángela Sastre-Santos, Ana Charas

Dyes and Pigments· Volume 161
Publisher page

Abstract

Perylenediimides (PDIs) are among the most promising non-fullerene electron-acceptors for applications in organic photovoltaics (PV), providing a large scope for structural modifications. PDI-based dimers have shown the highest performances in PV devices owing to their characteristic twisted conformations that reduce their tendency to form large aggregates which are detrimental for PV operation. In this work, two fluorene-bridged perylenediimide (PDI) dimers with oligo(ethylene oxide) or alkyl chains anchored to the C9 position of the fluorene unit were synthesized and investigated in solution-processed organic bulk heterojunction (BHJ) photovoltaic cells as electron acceptors. The PDI dimer substituted with oligo(ethylene oxide) chains resulted in improved power conversion efficiencies (in 20%–53%) in solution processed bulk heterojunction (BHJ) cells with two different polymer donors, PTB7 and PffBT4T-2OD. Nevertheless, the replacement of alkyl chains by oligo(ethylene oxide) chains did not significantly affect the geometric characteristics of the PDI dimers and the optical and electrochemical properties were only marginally modified. Increased exciton dissociation and enhanced charge transport derived from a more densely packed π-π stacking in the solid state caused by ethylene oxide groups are pointed out as possible causes for the improved PV performance. The influence of 1,8-diiodooctane as solvent additive in the blend films was also investigated and allowed to further increase the efficiencies of the cells with PTB7. Overall, the results show that the simple replacement of alkyl chains by oligo(ethylene oxide) chains in PDI dimers is an efficient way to improve the PV performance without compromising the optoelectronic properties of the PDI acceptor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Semiconducting polymers: the third generation10.1039/b914956m ↗
2. Roll-to-roll fabrication of polymer solar cells10.1016/S1369-7021(12)70019-6 ↗
3. Organic solar cell by inkjet printing—an overview10.3390/technologies5030053 ↗
4. Organic photovoltaic cells: from performance improvement to manufacturing processes10.1002/smll.201402883 ↗
5. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
6. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
7. Surpassing 10% efficiency benchmark for nonfullerene organic solar cells by scalable coating in air from single nonhalogenated solvent10.1002/adma.201705485 ↗
8. Charge Carrier mobility of the organic photovoltaic materials PTB7 and PC71BM and its influence on device performance10.1016/j.orgel.2015.03.013 ↗
9. Role of coherence and delocalization in photo-induced electron transfer at organic interfaces10.1038/srep32914 ↗
10. Visualizing charge separation in bulk heterojunction organic solar cells10.1038/ncomms3334 ↗
11. New insights into the mechanisms of photodegradation/stabilization of P3HT:PCBM active layers using poly(3-hexyl-d13-thiophene)10.1021/cm402193y ↗
12. Indene−C60 bisadduct: a new acceptor for high-performance polymer solar cells10.1021/ja908602j ↗
13. Molecular helices as electron acceptors in high-performance bulk heterojunction solar cells10.1038/ncomms9242 ↗
14. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
15. Perylenediimides as non-fullerene acceptors in bulk-heterojunction solar cells (BHJSCs)10.1039/C6TA02045C ↗
16. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
17. Organic n-channel transistors based on core-cyanated perylene carboxylic diimide derivatives10.1021/ja074675e ↗
18. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
19. Synthesis, self-assembly, and solar cell performance of N-annulated perylene diimide non-fullerene acceptors10.1021/acs.chemmater.6b03292 ↗
20. Bay-linked perylene bisimides as promising non-fullerene acceptors for organic solar cells10.1039/C3CC47204C ↗
21. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
22. A perylene bisimide derivative with a LUMO level of −4.56 eV for non-fullerene solar cells10.1039/C6TC01045H ↗
23. Ring-fusion as a perylenediimide dimer design concept for high-performance non-fullerene organic photovoltaic acceptors10.1039/C5SC04956C ↗
24. Diphenylphenoxy-thiophene-pdi dimers as acceptors for OPV applications with open circuit voltage approaching 1 Volt10.3390/nano8040211 ↗
25. Perylene diimide based all small-molecule organic solar cells: Impact of branched-alkyl side chains on solubility, photophysics, self-assembly, and photovoltaic parameters10.1016/j.orgel.2016.05.012 ↗
26. Solvent effects on microwave dielectric relaxation in poly(ethylene glycols)10.1002/(SICI)1097-0126(199801)45:1<43::AID-PI902>3.0.CO;2-1 ↗
27. Roles of flexible chains in organic semiconducting materials10.1021/cm4018776 ↗
28. Diketopyrrolopyrrole–diketopyrrolopyrrole-based conjugated copolymer for high-mobility organic field-effect transistors10.1021/ja308211n ↗
29. Molecular design and morphology control towards efficient polymer solar cells processed using non-aromatic and non-chlorinated solvents10.1002/adma.201304825 ↗
30. Strategy for enhancing the dielectric constant of organic semiconductors without sacrificing charge Carrier mobility and solubility10.1002/adfm.201402244 ↗
31. Diketopyrrolopyrrole-based conjugated polymers bearing branched oligo(ethylene glycol) side chains for photovoltaic devices10.1002/anie.201602775 ↗
32. Novel red-emitting fluorene-based copolymers10.1039/b203862e ↗
33. Aryl-bisalkynyl bridged perylene diimides dimers: efficient synthesis, properties and improved electron mobilities10.1016/j.dyepig.2017.05.030 ↗
34. Replacing alkyl with oligo(ethylene glycol) as side chains of conjugated polymers for close π–π stacking10.1021/acs.macromol.5b00702 ↗
35. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
36. Enhanced power-conversion efficiency in polymers solar cells using an inverted structure10.1038/nphoton.2012.190 ↗
37. Vinylene- and ethynylene-bridged perylene diimide dimers as nonfullerene acceptors for polymer solar cells10.1016/j.dyepig.2017.06.049 ↗
38. High-efficiency nonfullerene polymer solar cell enabling by integration of film-morphology optimization, donor selection, and interfacial engineering10.1021/acsami.6b03926 ↗
39. Design rules for donors in bulk‐heterojunction solar cells—towards 10 % energy‐conversion efficiency10.1002/adma.200501717 ↗
40. Perylene–Diimide based non-fullerene solar cells with 4.34% efficiency through engineering surface donor/acceptor compositions10.1021/cm5006339 ↗
41. Understanding the morphology of solution processed fullerene-free small molecule bulk heterojunction blends10.1039/C6CP01269H ↗