Asymmetric indenothiophene-based nonfullerene acceptors for binary- and ternary-blend polymer solar cells
Source abstract
Abstract
Abstract A series of nonfullerene acceptors (IOTC, IETC, IOPC and IEPC) have been designed and synthesized by using asymmetric indenothiophene as an electron-donating core. Different side chains (linear 4-n-octylphenyl and branched 4-(2-ethylhexyl)phenyl), and electron-withdrawing units (2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile and 2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) were used to tune the optoelectronic properties of the resulting indenothiophene-based nonfullerene acceptors. With a benchmark p-type copolymer of PBDB-T, the best-performance binary devices based on IOTC and IETC (both with the ending group of 2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) exhibited power conversion efficiencies (PCEs) of 7.94% and 7.40%, respectively. Whereas, the devices based on IOPC and IEPC (both with the ending group of 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile) showed relatively low PCEs of 4.86% and 5.26%, respectively. The improved photovoltaic properties of IOTC- and IETC-based binary devices are mainly attributed to their higher hole- and electron-mobilities compared to those of IOPC- and IEPC-based counterparts. In order to improve the light-harvesting ability of the binary PBDB-T:IOTC in the short wavelength region, PC71BM was introduced as the second acceptor to form a ternary blend of PBDB-T:IOTC:PC71BM. After optimization, the ternary blend of PBDB-T:IOTC:PC71BM with a weight ratio of 1:1:0.5 achieved a best PCE of 9.85% with a short-circuit current density (Jsc) of 16.35 mA/cm2, and a fill factor (FF) of 64.90%, much higher than the corresponding binary blend based on either PBDB-T:IOTC or PBDB-T:PC71BM. We further demonstrated that the addition of PC71BM not only improved the light absorption but also enhanced the carrier mobilities of the ternary blend thereby increasing the final PCE.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
2. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
3. Semitransparent ternary nonfullerene polymer solar cells exhibiting 9.40% efficiency and 24.6% average visible transmittance10.1016/j.nanoen.2018.11.010 ↗
4. Recent advances in wide bandgap semiconducting polymers for polymer solar cells10.1039/C6TA09325F ↗
5. Nonfullerene acceptors for semitransparent organic solar cells10.1002/aenm.201800002 ↗
6. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
7. Microstructural and electronic origins of open-circuit voltage tuning in organic solar cells based on ternary blends10.1002/aenm.201501335 ↗
8. A review of non-fullerene polymer solar cells: from device physics to morphology control10.1088/1361-6633/ab0530 ↗
9. Non-fullerene organic small molecule acceptor materials
10. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
11. Heteroheptacene-cored semiconducting molecules for non-fullerene organic solar cells10.1016/j.dyepig.2017.05.026 ↗
12. Non-fullerene small molecular acceptors based on dithienocyclopentafluorene and dithienocyclopentacarbazole cores for polymer solar cells10.1016/j.dyepig.2017.05.011 ↗
13. High efficiency ternary polymer solar cells based on a fused pentacyclic electron acceptor10.1039/C8TA00944A ↗
14. Fused-ring acceptors with asymmetric side chains for high-performance thick-film organic solar cells10.1002/adma.201703527 ↗
15. Side-chain impact on molecular orientation of organic semiconductor acceptors: high performance nonfullerene polymer solar cells with thick active layer over 400 nm10.1002/aenm.201800856 ↗
16. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
17. Enhancing the photovoltaic performance of nonfullerene acceptors via conjugated rotatable end groups10.1002/aenm.201802131 ↗
18. Asymmetric-indenothiophene-based copolymers for bulk heterojunction solar cells with 9.14% efficiency10.1002/adma.201505957 ↗
19. Push-pull type non-fullerene acceptors for polymer solar cells: effect of the donor core10.1021/acsami.7b05417 ↗
20. Alkyl side-chain and fluorination engineering in the indeno[1,2-b]fluorene-based small-molecule acceptors for efficient non-fullerene organic solar cells10.1016/j.dyepig.2018.08.039 ↗
21. A solution-processed small molecule with optimal side chains for high efficiency non-fullerene organic solar cells10.1016/j.dyepig.2018.09.065 ↗
22. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
23. A fused ring electron acceptor with decacyclic core enables over 13.5% efficiency for organic solar cells10.1002/aenm.201802050 ↗
24. Enhancing the performance of non-fullerene organic solar cells via end group engineering of fused-ring electron acceptors10.1039/C8TA05800H ↗
25. Angular-shaped 4,9-dialkylnaphthodithiophene-based octacyclic ladder-type non-fullerene acceptors for high efficiency ternary-blend organic photovoltaics10.1021/acs.chemmater.8b01089 ↗
26. Efficient ternary organic solar cells enabled by the integration of nonfullerene and fullerene acceptors with a broad composition tolerance10.1002/adfm.201807006 ↗
27. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
28. High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors10.1038/s41560-018-0234-9 ↗
29. A new n-type semiconducting molecule with an asymmetric indenothiophene core for a high-performing non-fullerene type organic solar cell10.1039/C7TC00706J ↗
30. Effectively improving extinction coefficient of benzodithiophene and benzodithiophenedione-based photovoltaic polymer by grafting alkylthio functional groups10.1002/asia.201501387 ↗