journal article·2019-07

An efficient strategy to supervise absorption, mobility, morphology of photovoltaic molecule by inserting a D-A unit

Ziqian Gu, Jiali Guo, Rulin Hao, Zixuan Lin, Yu Qian, Chao Ma, Yankai Fan, Xiaoyuan Deng, Guangjun Zhang, Wenhong Peng, Hao Xia, Qiang Peng, Weiguo Zhu

Dyes and Pigments· Volume 166
Publisher page

Abstract

Abstract The absorption, mobility and morphology of molecules in the active layer have a crucial influence on photovoltaic properties of organic solar cells. In this work, we design an A1-(D-A)2-D-A1 type oligomer DRCN4FBT on the basis of an A1-D-A-D-A1 type small molecule DRCN2FBT by inserting D-A unit. It is found that oligomer DRCN4FBT exhibits wider absorption spectrum and higher carrier mobility and better morphology than small molecule DRCN2FBT in active layer using fullerene PC71BM as acceptor. The absorption and energy level, mobility, morphology of DRCN4FBT in active layer are well supervised by inserting D-A unit in DRCN2FBT. As a result, its power conversion efficiency and short current density are increased by about 20% for the DRCN4FBT/PC71BM based organic solar cells in comparison with the DRCN2FBT/PC71BM based devices. It indicates that simply increasing D-A unit in small molecules to construct oligomer is an efficient strategy to improve photovoltaic properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Polymer photovoltaic cells:enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Materials and applications for large area electronics: solution-based approaches10.1021/cr900150b ↗
3. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
4. Large scale deployment of polymer solar cells onland, on sea and in the air10.1039/c3ee43212b ↗
5. Overview of high-efficiency organic photovoltaic materials and devices10.1016/j.rser.2015.08.032 ↗
6. Insertion of chlorine atoms onto π-bridges of conjugated polymer enables improved photovoltaic performance10.1016/j.nanoen.2019.01.039 ↗
7. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
8. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
9. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
10. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
11. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
12. High-efficiency small-molecule ternary solar cells with a hierarchical morphology enabled by synergizing fullerene and non-fullerene acceptors10.1038/s41560-018-0234-9 ↗
13. Modulating molecular orientation enables efficient nonfullerene small-molecule organic solar cells10.1021/acs.chemmater.8b00287 ↗
14. All-small molecule solar cells based on donor molecule optimization with highly enhanced efficiency and stability10.1039/C8TA02778A ↗
15. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
16. Dithieno[3,2-b:2’,3’-d] pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells
17. 11.4% Efficiency non-fullerene polymer solar cells with trialkylsilyl substituted 2D-conjugated polymer as donor10.1038/ncomms13651 ↗
18. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
19. Narrow-band-gap conjugated chromophores with extended molecular lengths10.1021/ja310483w ↗
20. Design and properties of intermediate-sized narrow band-gap conjugated molecules relevant to solution -processed organic solar cells10.1021/ja413144u ↗
21. One-step synthesis of precursor oligomers for organic photovoltaics: a comparative study between polymers and small molecules10.1021/acsami.5b09460 ↗
22. Acceptor end-capped oligomeric conjugated molecules with broadened absorption and enhanced extinction coefficients for high-efficiency organic solar cells10.1002/adma.201600512 ↗
23. Chain length dependence of the photovoltaic properties of monodisperse donor–acceptor oligomers as model compounds of polydisperse low band gap polymers10.1002/adfm.201401945 ↗
24. Oligomeric donor material for high-efficiency organic solar cells: breaking down a polymer10.1002/adma.201501491 ↗
25. Series of multifluorine substituted oligomers for organic solar cells with efficiency over 9% and fill factor of 0.77 by combination thermal and solvent vapor annealing10.1021/jacs.6b03495 ↗
26. Simple-structured small molecule acceptors constructed by a weakly electron-deficient thiazolothiazole core for high-efficiency nonfullerene organic solar cells10.1039/C8TA09370A ↗
27. Novel donor–acceptor polymers containing o-fluoro-p-alkoxyphenyl-substituted benzo[1,2-b:4,5-b′] di- thiophene units for polymer solar cells with power conversion efficiency exceeding 9%10.1039/C6TA03709G ↗
28. Tuning the central fused ring and terminal units to improve the photovoltaic performance of Ar(A–D)2type small molecules in solution-processed organic solar cells10.1039/C6TA00416D ↗
29. Significantly improved photovoltaic performance of the triangular-spiral TPA(DPP–PN)3 by appending planar phenanthrene units into the moleculer terminals
30. Efficient chemical structure and device engineering for achieving difluorinated 2,2-bithiophene-based small molecular organic solar cells with 9.0% efficiency10.1039/C8TA02699H ↗
31. Highly thermally stable non-fullerene organic solar cells:p-DTS(FBTTh2)2:P(NDI2OD-T2) bulk heterojunction10.1016/j.nanoen.2015.04.035 ↗
32. A novel small molecule based on dithienophosphole oxide for bulk heterojunction solar cells without pre- or post-treatments10.1016/j.dyepig.2017.04.007 ↗
33. A maverick asymmetrical backbone with distinct flanked twist angles modulating the molecular aggregation and crystallinity for high performance nonfullerene solar cells
34. Multiple cases of efficient nonfullerene ternary organic solar cells enabled by an effective morphology control method
35. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
36. DR3TBDTT based ternary bends containing conjugated polymers: crystallization determines morphology and performance10.1002/cjoc.201800064 ↗
37. A near-infrared photoactive morphology modifier leads to significant current improvement and energy loss mitigation for ternary organic solar cells10.1002/advs.201800755 ↗
38. Improved domain size and purity enables efficient all-small-molecule ternary solar cells10.1002/adma.201703777 ↗
39. Combining energy transfer and optimized morphology for highly efficient ternary polymer solar cells10.1002/aenm.201602552 ↗
40. Morphology control in organic solar cells10.1002/aenm.201703147 ↗
41. Energy losses in small-molecule organic photovoltaics10.1002/aenm.201700237 ↗
42. Optical gaps of organic solar cells as a reference for comparing voltage losses10.1002/aenm.201801352 ↗
43. Tackling energy loss for high-efficiency organic solar cells with integrated multiple strategies10.1002/adma.201706816 ↗
44. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
45. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
46. Carrier transport and recombination in efficient “all-small-molecule” solar cells with the nonfullerene acceptor IDTBR10.1002/aenm.201800264 ↗
47. High-performance all-small-molecule solar cells based on a new type of small molecule acceptors with chlorinated end groups10.1002/aenm.201802021 ↗