journal article·2020-03

Designing a thiophene-fused quinoxaline unit to build D–A copolymers for non-fullerene organic solar cells

Yajing Zhang, Pengcheng Zhou, Jiacheng Wang, Xiaowei Zhan, Xingguo Chen

Dyes and Pigments· Volume 174
Publisher page

Abstract

Abstract In this work, a kind of thiophene-fused quinoxaline (QXT) unit has been designed and synthesized as an electron-deficient unit to build two D-A conjugated copolymers (PBDTT-QXT-TF1 and PBDTT-QXT-TF2) with a thiophene ring as “π-bridge” and thienyl substituted benzo[1,2-b:4,5-b’]dithiophene (BDTT) unit as an electron-rich unit, in which two adjacent side-chain thiophene rings with different number of fluorine atoms have been introduced at 2,3-position of QXT unit. It is found that the fusion of a thiophene ring onto QX unit can result in a red-shift of absorption and narrow the optical bandgap through stabilizing the quinoid structure of the conjugated backbone, and the introduction of carboxyl group at the fused thiophene can reduce the HOMO energy level that is favorable for the enhancement of VOC of the organic solar cells (OSCs). However, the introduction of fused thiophene ring results in partially twist of conjugated backbone, thus attenuating the intramolecular charge transfer (ICT) absorption intensity and finally lead to the decrement of the JSC for the OSCs. Therefore, the corresponding OSC devices based on the PBDTT-QXT-TF1 or PBDTT-QXT-TF2 with IDIC acceptor show much high VOC but low JSC. In addition, the introduction of side-chain thiophene rings with different number fluorine atoms also regulates the energy levels and the structural crystallinity, thus further influencing the photovoltaic performances. By comparison, the PBDTT-QXT-TF1:IDIC blended film exhibits higher and more balanced hole/electron charge mobilities than the PBDTT-QXT-TF2:IDIC blended film, and PBDTT-QXT-TF1:IDIC based device shows higher power conversion efficiency (PCE) of 6.67% (VOC = 0.951 V, JSC = 11.56 mA cm−2 and FF = 60.65%) than PBDTT-QXT-TF2:IDIC based device with a PCE of 5.12% (VOC = 0.975 V, JSC = 9.78 mA cm−2 and FF = 53.61%).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
2. Low Band molecular design toward efficient polymer solar cells with high gap polymers incorporating a dicarboxylic imide-derived acceptor moiety for efficient polymer solar cells10.1021/mz400185k ↗
3. Polymer content10.1021/ja402971d ↗
4. Synthesis and photovoltaic properties of a series of narrow bandgap organic semiconductor acceptors with their absorption edge reaching 900 nm10.1021/acs.chemmater.7b03928 ↗
5. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
6. Single junction binary blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
7. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
8. Fast charge separation in anon-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
9. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
10. Side-chain isomerization on ann-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
11. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra-narrow band gap10.1002/anie.201610944 ↗
12. Covalently bound clusters of alpha-substituted PDI: rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
13. New wide band gap donor for efficient fullerene-free all-small-molecule organic solar cells10.1021/jacs.6b11612 ↗
14. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
15. Balanced partnership between donor and acceptor components in nonfullerene organic solar cells with >12% efficiency10.1002/adma.201706363 ↗
16. High-performance ternary organic solar cell enabled by a thick active layer containing a liquid crystalline small molecule donor10.1021/jacs.6b11991 ↗
17. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
18. Enhancing performance of nonfullerene acceptors via side-chain conjugation strategy10.1002/adma.201702125 ↗
19. Use of two structurally similar small molecular acceptors enabling ternary organic solar cells with high efficiencies and fill factors10.1039/C8EE01700J ↗
20. Fused tris(thienothiophene)-based electron acceptor with strong near-infrared absorption for high-performance as-cast solar cells10.1002/adma.201705969 ↗
21. Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors10.1038/s41467-019-08508-3 ↗
22. A simple phenyl group introduced at the tail of alkyl side chains of small molecular acceptors: new strategy to balance the crystallinity of acceptors and miscibility of bulk heterojunction enabling highly efficient organic solar cells10.1002/adma.201807832 ↗
23. Nonfullerene acceptor for organic solar cells with chlorination on dithieno[3,2-b:2′,3′-d]pyrrol fused-ring10.1021/acsenergylett.9b00147 ↗
24. Over 14% Efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
25. Achieving over 16% Efficiency for single junction organic solar cells10.1007/s11426-019-9457-5 ↗
26. Single junction polymer solar cells with 16.35% efficiency enabled by a platinum(II) complexation strategy10.1002/adma.201901872 ↗
27. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
28. A monothiophene unit incorporating both fluoro and ester substitution enabling high performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
29. Quinoxaline based conjugated donor polymer for highly efficient organic thin-film solar cells
30. Synthesis of quinoxaline based polymers with multiple electron-withdrawing groups for polymer solar cells
31. Efficient alternating polymer based on benzodithiophene and di-fluorinated quinoxaline derivatives for bulk heterojunction photovoltaic cells10.1016/j.polymer.2017.03.056 ↗
32. Enhanced open-circuit voltages of trifluoromethylated quinoxaline-based polymer solar cells10.1016/j.orgel.2018.11.022 ↗
33. Fluorination as an effective tool to increase the photovoltaic performance of indacenodithiophene-alt-quinoxaline based wide bandgap copolymers10.1016/j.orgel.2016.03.012 ↗
34. Step-by-step improvement in photovoltaic properties of fluorinated quinoxaline-based low-band-gap polymers10.1016/j.orgel.2017.04.025 ↗
35. Introducing alkylthio side chains into acceptor units to improve the photovoltaic performance of a quinoxaline based D-A polymer10.1016/j.orgel.2018.05.047 ↗
36. An indacenodithiophene−quinoxaline polymer prepared by direct arylation polymerization for organic photovoltaics10.1021/acs.macromol.5b02324 ↗
37. Efficient polymer solar cells based on a new quinoxaline derivative with fluorinated phenyl side chain10.1039/C6TC00353B ↗
38. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
39. Synthesis and photovoltaic properties of copolymers with a fluoro quinoxaline unit10.1002/pola.28957 ↗
40. Quinoxaline–thiophene based thick photovoltaic devices with an efficiency of ~8%10.1039/C6TA03801H ↗
41. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
42. High-efficiency polymer solar cells with a cost-effective quinoxaline polymer through nanoscale morphology control induced by practical processing additives10.1039/c3ee00110e ↗
43. A wide‐bandgap conjugated polymer based on quinoxalino[6,5‐f ]quinoxaline for fullerene and non‐fullerene polymer solar cells10.1002/marc.201900120 ↗
44. Steady enhancement in photovoltaic properties of fluorine functionalized quinoxaline-based narrow bandgap polymer10.3390/molecules24010054 ↗
45. Enhancing the photovoltaic properties of terpolymers containing benzo[1,2-b:4,5-b]dithiophene, phenanthro[4,5-abc]phenazine and benzo[c][1,2,5]thiadiazole by changing the substituents10.1039/C5TC00785B ↗
46. Hexafluoroquinoxaline based polymer for nonfullerene solar cells reaching 9.4% efficiency10.1021/acsami.7b03947 ↗
47. Tetrafluoroquinoxaline based polymers for non-fullerene polymer solar cells with efficiency over 9%10.1016/j.nanoen.2016.10.008 ↗
48. Optimizing conjugated side chains on quinoxaline based polymers for on fullerene solar cells with 10.5% efficiency10.1039/C7TA10262C ↗
49. A medium bandgap D−A copolymer based on 4-alkyl-3,5-difluorophenyl substituted quinoxaline unit for high performance solar cells10.1021/acs.macromol.8b00326 ↗
50. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
51. Realizing 8.6% efficiency from non-halogenated solvent processed additive free all polymer solar cells with a quinoxaline based polymer10.1002/solr.201800340 ↗
52. Wide bandgap copolymers based on quinoxalino[6,5-f ]quinoxaline for highly efficient nonfullerene polymer solar cells10.1002/adfm.201701491 ↗
53. Quinoxaline-based wide band gap polymers for efficient nonfullerene organic solar cells with large open-circuit voltages10.1021/acsami.8b04432 ↗
54. A low cost and high performance polymer donor material for polymer solar cells10.1038/s41467-018-03207-x ↗
55. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells10.1021/ja1112595 ↗
56. Effects of fluorination and side chain branching on molecular conformation and photovoltaic performance of donor–acceptor copolymers10.1021/acs.chemmater.5b01503 ↗
57. Impact of the siloxane-terminated side chain on photovoltaic performances of the dithienylbenzodithiophene–difluorobenzotriazole-based wide band gap polymer donor in non-fullerene polymer solar cells10.1021/acsami.9b08722 ↗
58. A wide-bandgap D–A copolymer donor based on a chlorine substituted acceptor unit for high performance polymer solar cells10.1039/C9TA03272J ↗
59. Side-chain influences on the properties of benzodithiophene-alt-di (thiophen-2-yl)quinoxaline polymers for fullerene-free organic solar cells10.1016/j.polymer.2019.04.011 ↗
60. Thiophene-fused benzothiadiazole: a strong electron-acceptor unit to build D–A copolymer for highly efficient polymer solar cells10.1021/cm501052a ↗
61. Constructing D–A copolymers based on thiophene-fused benzotriazole units containing different alkyl side-chains for non-fullerene polymer solar cells10.1039/C7TC02098H ↗
62. Design of a thiophene-fused benzotriazole unit as an electron acceptor to build D–A copolymers for polymer solar cells10.1039/C7TC00083A ↗
63. Fluorinated thieno [2',3':4, 5] benzo [1, 2-d][1, 2, 3] triazole: new acceptor unit to construct polymer donors10.1021/acsomega.8b02053 ↗
64. Impact of an electron withdrawing group on the thiophene-fused benzotriazole unit on the photovoltaic performance of the derived polymer solar cells10.1016/j.dyepig.2019.03.056 ↗
65. Narrow bandgap non-fullerene acceptor based on a thiophene-fused benzothiadiazole unit with a high short-circuit current density of over 20 mA cm−210.1039/C8TA00704G ↗
66. Enhancing the JSC of P3HT-based OSCs via a thiophene-fused aromatic heterocycle as a “π-bridge” for A−π–D−π–A-type acceptors10.1021/acsami.9b08007 ↗