journal article·2021-08

D-π-D type fluorescent compounds based on dehydroabietic acid triarylamine: Synthesis, photophysical properties and application as hole-transporting materials in perovskite solar cells

Yanan Gao, Liwei Dou, Hong Gao, Jie Song, Shibin Shang, Zhanqian Song

Dyes and Pigments· Volume 192
Publisher page

Abstract

Abstract D-π-D hole-transporting materials have the potential to be excellent dopant-free hole-transporting materials (HTMs) for perovskite solar cells (PSCs) because of their tunable energy levels, high charge mobility, good solubility, and excellent film-forming properties. In this paper, two series of D-π-D type compounds, Series 1 (2TPA-CZ1~2TPA-CZ3) and Series 2 (2DTPA-CZ1~2DTPA-CZ3), were synthesized by linking a carbazole derivative (as a π-bridge) to triaryamine or dehydroabietic acid triarylamine groups (the donor groups) via C–C coupling reactions. The optical, electrochemical, thermal, and photovoltaic properties in PSCs of these compounds were fully investigated. The two series of compounds exhibit good ultraviolet absorption, fluorescence emission, and electrochemical and thermal properties. In addition, their highest occupied molecular orbital levels and energy gaps make them suitable for use as hole-transporting materials in PSCs. Among the PSCs developed, Device 1, based on 2TPA-CZ1, showed the best performance, with a power conversion efficiency (PCE) of 12.27%, a open circuit voltage (VOC) of 1.13 V, a short-circuit photocurrent density (JSC) of 15.10 mA cm−2, and a fill factor (FF) of 71.61%, which is comparable to that of a device based on the conventional hole-transporting material Spiro-OMeTAD. While the PCE of Devices 4–6 was lower than the PCE of Devices 1–3, Devices 4–6 exhibit better stability. This may be due to the higher Tg and better film-forming properties of compounds formed using the dehydroabietic acid skeleton. In additional, the introduction of alkyl groups on the carbazole moiety decreased the efficiency of the PSC devices. These results demonstrate that the 2TPA-CZ1 compounds are promising HTMs for PSC applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Compositional engineering of perovskite materials for high-performance solar cells10.1038/nature14133 ↗
2. Challenges for commercializing perovskite solar cells10.1126/science.aat8235 ↗
3. Benzodithiazole-based hole-transporting material for efficient perovskite solar cells10.1002/ajoc.201800490 ↗
4. Effect of the acceptor and alkyl length in benzotriazole-based donor-acceptor-donor type hole transport materials on the photovoltaic performance of PSCs10.1016/j.dyepig.2019.01.059 ↗
5. Facile synthesis of a dopant-free hole transporting material with a phenothiazine core for planar perovskite solar cells10.1039/C7RA10677G ↗
6. Recent progress in hybrid perovskite solar cells based on p-type small molecules as hole transporting materials10.3866/PKU.WHXB201803231 ↗
7. A review on triphenylamine (TPA) based organic hole transport materials (HTMs) for dye sensitized solar cells (DSSCs) and perovskite solar cells (PSCs): evolution and molecular engineering10.1039/C6TA08449D ↗
8. Promising hole-transporting materials for perovskite solar cells: modulation of the electron-deficient units in triphenylamine derivative-based molecules10.1002/qua.26070 ↗
9. Unveiling the role of conjugate bridge in triphenylamine hole-transporting materials for inverted and direct perovskite solar cells10.1109/JPHOTOV.2019.2924745 ↗
10. Hydrophobic hole-transporting materials incorporating multiple thiophene cores with long alkyl chains for efficient perovskite solar cells10.1016/j.electacta.2016.05.122 ↗
11. Influence of dimethoxytriphenylamine groups on carbazole-based hole transporting materials for perovskite solar cells10.1016/j.solener.2019.08.036 ↗
12. Organic interfacial materials for perovskite-based optoelectronic devices10.1039/C8EE02744G ↗
13. Facile donor (D)-π-D triphenylamine-based hole transporting materials with different π-linker for perovskite solar cells10.1016/j.solener.2019.11.071 ↗
14. A simple carbazole-triphenylamine hole transport material for perovskite solar cells10.1021/acs.jpcc.8b08168 ↗
15. Dopant-free hole transport materials with a long alkyl chain for stable perovskite solar cells10.3390/nano9070935 ↗
16. Synthesis, spectroscopy, photophysics and thermal behaviour of stilbene-based triarylamines with dehydroabietic acid methyl ester moieties10.1039/b815711a ↗
17. Three series π-extended fluorescent compounds based on dehydroabietic acid triarylamine moiety: synthesis, photophysical properties and hole transporting properties10.1016/j.dyepig.2020.108551 ↗
18. Spectra properties and application of dehydroabietic acid triarylamine based D-π-A type fluorescent compound
19. Synthesis of the side chain cross-linked tyrosine oligomers dityrosine, trityrosine, and pulcherosine10.1021/jo051076m ↗
20. Palladium-catalyzed borylation of m-dibromobenzene derivative and its applications in one-pot tandem suzuki–miyaura arenes synthesis10.1016/j.tet.2015.10.011 ↗
21. Donor-π-donor type hole transporting materials: marked π-bridge effects on optoelectronic properties, solid-state structure, and perovskite solar cell efficiency10.1039/C6SC01478J ↗
22. Design of cyclopentadithiophene-based small organic molecules as hole selective layers for perovskite solar cells10.1039/C8SE00119G ↗
23. Dopant-free hole transport materials based on alkyl-substituted indacenodithiophene for planar perovskite solar cells10.1039/C8TC00385H ↗
24. Acene-based organic semiconductors for organic light-emitting diodes and perovskite solar cells10.1039/C8TC01956H ↗
25. Simply designed nonspiro fluorene-based hole-transporting materials for high performance perovskite solar cells10.1016/j.synthmet.2019.02.011 ↗
26. Side-chain polymers as dopant-free hole-transporting materials for perovskite solar cells-the impact of substituents' positions in carbazole on device performance10.1021/acsami.9b07859 ↗
27. Hole transport materials with low glass transition temperatures and high solubility for application in solid-state dye-sensitized solar cells10.1021/nn204296b ↗
28. Frisch · 2016
29. A two-dimensional hole-transporting material for high-performance perovskite solar cells with 20% average efficiency10.1002/anie.201806392 ↗
30. New pyrene-based butterfly-shaped blue AIEgens: synthesis, structure, aggregation-induced emission and their nondoped blue OLEDs10.1016/j.dyepig.2019.107881 ↗
31. High-efficiency CsPbI2Br perovskite solar cells with dopant-free Poly(3-hexylthiophene) hole transporting layers10.1002/aenm.202000501 ↗