Synthesis and photovoltaic properties of a small molecule acceptor with thienylenevinylene thiophene as π bridge
Source abstract
Abstract
Abstract A new n-type organic semiconductor (n-OS) acceptor with (E)-5-(2-(5-(2-ethylhexyl)thiophen-2-yl)vinyl)-thiophene-2-yl (TVT) functional group as π-bridge to link indacenodithiophene (IDT) core and 3-(dicyanomethylidene)indan-1-one (IC) terminals, named ITVT, was synthesized and applied in polymer solar cells (PSCs). It is the first time employing TVT unit in n-OS small molecule acceptor. Benefited from the conjugated TVT side groups, the small molecule ITVT shows a strong absorption at the short wavelength range (300–500 nm). In addition, ITVT exhibits a low optical band gap (Egopt) of 1.48 eV and a medium electron mobility of 1.85 × 10−4 cm2 V-1 s-1. A wide band gap polymer PBZ was chosen as donor to fabricate an inverted BHJ PSCs because of the complementary absorption and matched molecular energy levels. The as-cast PSCs yield a power conversion efficiency (PCE) of 5.84% with an open-circuit voltage (Voc) of 0.96 V and a short-circuit current density (Jsc) of 14.22 mA cm−2 under the illumination of AM 1.5 G at 100 mW cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
3. Molecular electron acceptors for efficient fullerene-free organic solar cells10.1039/C6CP07465K ↗
4. New developments in non-fullerene small molecule acceptors for polymer solar cells10.1039/C6QM00247A ↗
5. Non-fullerene electron acceptors for use in organic solar cells10.1021/acs.accounts.5b00199 ↗
6. Recent progress in non-fullerene small molecule acceptors in organic solar cells (OSCs)10.1039/C6TC05066B ↗
7. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
8. Small is powerful: recent progress in solution-processed small molecule solar cells10.1002/aenm.201602242 ↗
9. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
10. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
11. An alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
12. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
13. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
14. Enhancing performance of nonfullerene acceptors via side-chain conjugation strategy
15. A near-infrared non-fullerene electron acceptor for high performance polymer solar cells10.1039/C7EE00844A ↗
16. Fused hexacyclic nonfullerene acceptor with strong near-infrared absorption for semitransparent organic solar cells with 9.77% efficiency
17. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
18. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
19. 26 mA cm-2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗
20. Dithieno[3,2-b:2',3'-d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells
21. Non-fullerene acceptors end-capped with an extended conjugation group for efficient polymer solar cells10.1016/j.orgel.2018.05.050 ↗
22. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency
23. Achieving highly efficient nonfullerene organic solar cells with improved intermolecular interaction and open-circuit voltage10.1002/adma.201700254 ↗
24. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
25. Fused nonacyclic electron acceptors for efficient polymer solar cells10.1021/jacs.6b12755 ↗
26. Design of a new small-molecule electron acceptor enables efficient polymer solar cells with high fill factor10.1002/adma.201704051 ↗
27. Isatylidene malononitrile derived acceptors for fullerene free organic solar cells10.1016/j.dyepig.2017.12.054 ↗
28. A new small molecule acceptor based on indaceno[2,1-b:6,5-b’]dithiophene and thiophene-fused ending group for fullerene-free organic solar cells10.1016/j.dyepig.2017.09.009 ↗
29. Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency10.1007/s11426-017-9199-1 ↗
30. Non-fullerene acceptors based on fused-ring oligomers for efficient polymer solar cells via complementary light-absorption10.1039/C7TA06631G ↗
31. Introducing cyclic alkyl chains into small-molecule acceptors for efficient polymer solar cells10.1039/C8TC01780H ↗
32. A twisted thieno[3,4-b]thiophene-based electron acceptor featuring a 14-pi-Electron indenoindene core for high-performance organic photovoltaics10.1002/adma.201704510 ↗
33. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers
34. Realizing 11.3% efficiency in fullerene-free polymer solar cells by device optimization10.1007/s11426-016-0198-0 ↗
35. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
36. Chlorine substituted 2D-conjugated polymer for high-performance polymer solar cells with 13.1% efficiency via toluene processing10.1016/j.nanoen.2018.04.002 ↗
37. High-performance as-cast nonfullerene polymer solar cells with thicker active layer and large area exceeding 11% power conversion efficiency10.1002/adma.201704546 ↗
38. High-performance non-fullerene polymer solar cells based on fluorine substituted wide bandgap copolymers without extra treatments10.1002/solr.201700020 ↗
39. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
40. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with Bi(thienylenevinylene) side chains10.1021/ja060141m ↗
41. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
42. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
43. Highly conjugated side-chain-substituted benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers for use in polymer solar cells10.1021/ma402245t ↗
44. Molecular design and application of a photovoltaic polymer with improved optical properties and molecular energy levels10.1021/acs.macromol.5b00649 ↗
45. Efficient ternary blend all-polymer solar cells with a polythiophene derivative as a hole-cascade material10.1039/C6TA05932E ↗
46. Synthesis and photovoltaic properties of a simple non-fused small molecule acceptor10.1016/j.orgel.2018.04.005 ↗
47. Selenium-containing medium bandgap copolymer for bulk heterojunction polymer solar cells with high efficiency of 9.8%10.1021/acs.chemmater.7b00729 ↗
48. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
49. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
50. Intensity dependence of current voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
51. Recombination-limited photocurrents in low bandgap polymer/fullerene solar cells10.1002/adfm.200801514 ↗
52. Morphology control in organic solar cells10.1142/9789813239494_0007 ↗