journal article·2017-02

Synthesis, characterization and photovoltaic properties of dithienobenzodithiophene-based conjugated polymers

Caili Lang, Jingzhe Fan, Yueyue Gao, Ming Liu, Yong Zhang, Fengyun Guo, Liancheng Zhao

Dyes and Pigments· Volume 137
Publisher page

Abstract

Abstract Two new donor-acceptor typed conjugated polymers (P1 and P2) based on the large coplanar and more-extended donor dithieno[2,3- d :2,3- d ′]benzo[1,2- b :4,5- b ′]dithiphene and thienopyrroledione (TPD) units were synthesized. P1 and P2 have the same polymer backbone, but with different side chains, where P1 has 2-ethylhexyl side chains and P2 has the longer branched 4-ethyoctyl side chains. The solubility measurements show that P2 with longer branched 4-ethyloctyl side chain has better solubility in organic solvents than that of P1. The optical, electrochemical and photovoltaic properties were investigated. P1 and P2 show the very same absorption features in both solution and film states indicating an enhanced molecular planarity of the polymer chains in P1 and P2, which benefits from the large coplanar dithieno[2,3- d :2,3- d ′]benzo[1,2- b :4,5- b ′]dithiphene unit. The band-gaps of P1 and P2 are at 1.83 eV and 1.74 eV, respectively. The solar cells with P1 or P2 as the electron donor component and PC 71 BM as the electron acceptor were fabricated and measured under AM 1.5G illumination at 100 mW cm −2 . The results show that the P2/PC 71 BM-based device showed a moderate power conversion efficiency of 2.86%, which is ∼50% improvement in comparison with P1/PC 71 BM-based device.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
2. Low-bandgap near-IR conjugated polymers/molecules for organic electronics10.1021/acs.chemrev.5b00165 ↗
3. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
4. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
5. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
6. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
7. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance10.1002/adma.201502110 ↗
8. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
9. Recent advances in polymer solar cells: realization of high device performance by incorporating water/alcohol-soluble conjugated polymers as electrode buffer layer10.1002/adma.201303391 ↗
10. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
11. Utilizing intermixing of conjugated polymer and fullerene from sequential solution processing for efficient polymer solar cells10.1016/j.orgel.2016.05.036 ↗
12. Development of new semiconducting polymers for high performance solar cells10.1021/ja808373p ↗
13. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
14. Synthesis of a low band gap polymer and its application in highly efficient polymer solar cells10.1021/ja9064975 ↗
15. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
16. Efficient polymer solar cells based on the copolymers of benzodithiophene and thienopyrroledione10.1021/cm100417z ↗
17. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in Polymer−Fullerene solar cells10.1021/ja1112595 ↗
18. Side chain effect on poly(benzodithiophene-co-dithienobenzoquinoxaline) and their applications for polymer solar cells10.1016/j.polymer.2015.11.052 ↗
19. Synthesis and photovoltaic effect in dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers10.1002/adma.201204238 ↗
20. Dithieno[2,3-d;2′,3′-d′]benzo[1,2-b;4,5-b′]dithiophene (dtbdt) as semiconductor for high-performance, solution-processed organic field-effect transistors10.1002/adma.200802031 ↗
21. Synthesis and application of dithieno[2,3-d:2’,3’-d’]benzo[1,2-b:4,5-b’]bithiophene in conjugated polymer10.1039/c2jm34629j ↗
22. PDT-S-T: a new polymer with optimized molecular conformation for controlled aggregation and π–π stacking and its application in efficient photovoltaic devices10.1002/adma.201301174 ↗
23. Synthesis of poly(benzothiadiazole-co-dithienobenzodithiophenes) and effect of thiophene insertion for high-performance polymer solar cells10.1002/chem.201300445 ↗
24. β-alkyl substituted dithieno[2,3-d;2′,3′-d′]benzo[1,2-b;4,5-b′]dithiophene semiconducting materials and their application to solution-processed organic transistors10.1021/cm301816t ↗
25. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
26. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
27. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
28. Side chain engineering of copolymers based on bithiazole and benzodithiophene for enhanced photovoltaic performance10.1021/ma200576y ↗
29. Stille polycondensation for synthesis of functional materials10.1021/cr100320w ↗
30. The effect of polymer solubilizing side-chains on solar cell stability10.1039/C5CP01158B ↗
31. Side-chain effect on cyclopentadithiophene/fluorobenzothiadiazole-based low band gap polymers and their applications for polymer solar cells10.1021/ma4009302 ↗
32. Effect of polymer side chains on charge generation and disorder in PBDTTPD solar cells10.1021/acsami.5b09497 ↗
33. Relationship between the ionization and oxidation potentials of molecular organic semiconductors10.1016/j.orgel.2005.01.002 ↗
34. Efficient two layer leds on a polymer blend basis10.1002/adma.19950070608 ↗
35. Novel, highly conducting, and soluble polymers From anodic coupling of alkyl-substituted cyclopentadithiophene monomers10.1021/ma00085a043 ↗
36. Frisch · 2009
37. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
38. Benzo[1,2-b:4,5-b′]dithiophene and thieno[3,4-c]pyrrole-4,6-dione based donor-π-acceptor conjugated polymers for high performance solar cells by rational structure modulation10.1021/acs.macromol.5b00251 ↗
39. Design rules for donors in bulk-heterojunction solar cells—towards 10 % energy-conversion efficiency10.1002/adma.200501717 ↗
40. Synthesis, characterization, charge transport, and photovoltaic properties of dithienobenzoquinoxaline- and dithienobenzopyridopyrazine-based conjugated polymers10.1021/ma2008699 ↗
41. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗
42. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
43. The energy of charge-transfer states in electron donor–acceptor blends: insight into the energy losses in organic solar cells10.1002/adfm.200900090 ↗
44. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗