journal article·2016-09

Enhanced photovoltaic performance of ternary solar cells by doping a new squaraine derivative

Linna Zhu, Rui Wang, Jianhui Qiao, Fei Wu

Dyes and Pigments· Volume 132
Publisher page

Abstract

Abstract Ternary blend solar cells have been proved to be an efficient way to harvest more photons over the near-IR region. In this work, the effect of adding a NIR absorbing squaraine derivative (TPE-SQ) into a conventional P3HT:PC 71 BM based bulk heterojunction photovoltaic cell is investigated. The new NIR dye exhibits a quite broad absorption band with full-width at half maximum of 169 nm in the film state, with the absorption edge extending to more than 850 nm. The near infrared absorption of the ternary system is enhanced by the blended squaraine component, and the energy level of the third component matched well with the donor and the acceptor material, leading to increased short-circuit current as well as elevated power conversion efficiency compared to the P3HT:PC 71 BM binary solar cell. The highest efficiency of 3.93% is achieved for a P3HT:PC 71 BM blend with 2.4 wt % of TPE-SQ.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
2. Tandem polymer solar cells featuring a spectrally matched low-bandgap polymer10.1038/nphoton.2011.356 ↗
3. Polymer solar cells10.1038/nphoton.2012.11 ↗
4. Diketopyrrolopyrrole based A2-D-A1-D-A2 type small molecules for organic solar cells: effects of substitution of benzene with thiophene10.1016/j.dyepig.2016.03.033 ↗
5. Highly efficient photovoltaics and field-effect transistors based on copolymers of mono-fluorinated benzothiadiazole and quaterthiophene: synthesis and effect of the molecular weight on device performance10.1039/C5PY00615E ↗
6. Dithieno[3,2-b:2’,3’-d]pyridin-5(4H)-one-based polymers with a bandgap up to 2.02 eV for high performance field-effect transistors and polymer solar cells with an open-circuit voltage up to 0.98 V and an efficiency up to 6.84%10.1039/C5TA06111C ↗
7. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
8. Side-chain engineering of isoindigo-containing conjugated polymers using polystyrene for high-performance bulk heterojunction solar cells10.1021/cm4024259 ↗
9. Organic tandem solar cells: a review10.1039/b817952b ↗
10. Recent trends in polymer tandem solar cells research10.1016/j.progpolymsci.2013.04.005 ↗
11. Materials for the active layer of organic photovoltaics: ternary solar cell approach10.1002/cssc.201200609 ↗
12. Organic ternary solar cells: a review10.1002/adma.201300623 ↗
13. Organic solar cells beyond one pair of donor-acceptor: ternary blends and more10.1021/jz400723u ↗
14. IR sensitization of an indene-C60 bisadduct (ICBA) in ternary organic solar cells10.1039/c3ee24512h ↗
15. Parallel-like bulk heterojunction polymer solar cells10.1021/ja211597w ↗
16. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
17. High-performance multiple-donor bulk heterojunction solar cells10.1038/nphoton.2015.9 ↗
18. Improvement of the light-harvesting efficiency in polymer/fullerene bulk heterojunction solar cells by interfacial dye modification10.1021/am800229p ↗
19. Multi-colored dye sensitization of polymer/fullerene bulk heterojunction solar cells10.1039/c0cc01787f ↗
20. Near-infrared absorbing boron-dibenzopyrromethenes that serve as light-harvesting sensitizers for polymeric solar cells10.1021/ol201770g ↗
21. Extension of light-harvesting area of bulk-heterojunction solar cells by cosensitization with ring-expanded metallophthalocyanines fused with fluorene skeletons10.1021/am4005896 ↗
22. Ternary bulk heterojunction solar cells: addition of soluble NIR dyes for photocurrent generation beyond 800 nm10.1021/am5007172 ↗
23. Improved efficiency of bulk heterojunction polymer solar cells by doping low-bandgap small molecules10.1021/am500074s ↗
24. Polymer bulk heterojunction photovoltaics employing a squaraine donor additive10.1016/j.orgel.2013.01.014 ↗
25. Effect of incorporation of squaraine dye on the photovoltaic response of bulk heterojunction solar cells based on P3HT: PC70BM blend10.1021/sc500276u ↗
26. Effect of two-step annealing on the performance of ternary polymer solar cells based on P3HT: PC71BM: SQ10.1016/j.solmat.2014.05.026 ↗
27. Polymer bulk heterojunction solar cells employing forster resonance energy transfer10.1038/nphoton.2013.82 ↗
28. Ternary bulk heterojunction photovoltaic cells composed of small molecule donor additive as cascade material10.1021/jp504365y ↗
29. Interface engineering for ternary blend polymer solar cells with a heterostructured near-IR dye10.1002/adma.201502773 ↗
30. Incorporation of diketopyrrolopyrrole dye to improve photovoltaic performance of P3HT: PC71BM based bulk heterojunction polymer solar cells10.1016/j.orgel.2016.01.028 ↗
31. Efficient ternary blend bulk heterojunction solar cells with tunable open-circuit voltage10.1021/ja205977z ↗
32. Functionalized squaraine donors for nanocrystalline organic photovoltaics10.1021/nn204676j ↗
33. Enhanced performance of polymer solar cells through sensitization by a narrow band gap polymer10.1016/j.solmat.2013.07.050 ↗
34. Influence of cyano groups on the properties of piezofluorochromic aggregation-induced emission enhancement compounds derived from tetraphenylvinyl-capped ethane10.1039/C4TC02165G ↗
35. Two-photon absorption in quadrupolar bis(acceptor)-terminated chromophores with electron-rich bis(heterocycle)vinylene bridges10.1021/cm061681l ↗
36. Complementary co-sensitization of an aggregating squaraine dye in solid-state dye-sensitized solar cells10.1016/j.dyepig.2013.08.003 ↗
37. Novel near-infrared squaraine sensitizers for stable and efficient dye-sensitized solar cells10.1002/adfm.201303769 ↗
38. Multichromophoric sensitizers based on squaraine for NiO based dye-sensitized solar cells10.1021/jp408900x ↗
39. A series of squaraine dyes: effects of side chain and the number of hydroxyl groups on material properties and photovoltaic performance10.1021/cm4034929 ↗
40. Performance enhancement of the P3HT/PCBM solar cells through NIR sensitization using a small-bandgap polymer10.1002/aenm.201200219 ↗
41. Near IR sensitization of organic bulk heterojunction solar cells: towards optimization of the spectral response of organic solar cells10.1002/adfm.200901473 ↗
42. Near-infrared photoresponse sensitization of solvent additive processed poly(3-hexylthiophene)/fullerene solar cells by a low band gap polymer10.1063/1.4742143 ↗
43. Interfacial layer for efficiency improvement of solution-processed small molecular solar cells10.1016/j.solmat.2013.08.013 ↗
44. Compositional dependence of the open-circuit voltage in ternary blend bulk heterojunction solar cells based on two donor polymers10.1021/ja302935n ↗
45. Effect of the incorporation of a low-band-gap small molecule in a conjugated vinylene copolymer: PCBM blend for organic photovoltaic devices10.1021/am900244y ↗
46. Solution processed bulk heterojunction polymer solar cells with low band gap DPP-CN small molecule sensitizer10.1016/j.orgel.2012.05.015 ↗
47. Improved power conversion efficiency of bulk heterojunction poly(3-hexylthiophene):PCBM photovoltaic devices using small molecule additive10.1016/j.solmat.2010.12.013 ↗
48. 6.5% Efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗