journal article·2021-12

Conformation-dependent mechanochromic delayed fluorescence of AIE-active tetra-coordinated B–N complexes

Shaoxin Song, Panpan Zhang, Hao Liu, Xiangyu Zhu, Xing Feng, Zujin Zhao, Ben Zhong Tang

Dyes and Pigments· Volume 196
Publisher page

Abstract

Abstract Mechanochromic luminescence (MCL) materials have attracted great attention due to their promising prospect in mechanical sensors, optoelectronic devices and data storage. In this work, two novel molecules bearing electron deficient tetra-coordinated phenylpyridine boron (PPYB) and electron donating phenothiazine (PTZ) are developed, and their thermal stability, optical and electronic structures, electrochemical property, photophysical property and MCL behaviors are investigated. Both molecules display obvious MCL effect with large emission color change from blue to yellow, which are ascribed to the changes of molecular conformation from quasi-axial conformation to quasi-equatorial one. In quasi-axial conformation, they show short fluorescence lifetimes without obvious delayed components, but in quasi-equatorial conformation, they have longer fluorescence lifetimes with prominent delayed components. Moreover, they are weakly fluorescent in solutions, but the emission intensity and delayed components are significantly enhanced in the solid state, demonstrating typical aggregation-induced delayed fluorescence (AIDF) characteristics. The application of both molecules as emitters in organic light-emitting diodes (OLEDs) is also evaluated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Luminescence and Fluorescent Materials · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Elucidating the excited state of mechanoluminescence in organic luminogens with room-temperature phosphorescence10.1002/anie.201708119 ↗
2. Opposite mechanoluminescence behavior of two isomers with different linkage positions10.1039/C8CC03083A ↗
3. Synthesis of fulvene-containing boron complexes with aggregation-induced emission and mechanochromic luminescence10.1039/D0CC05757F ↗
4. AIE-active β-diketones containing pyridiniums: fluorogenic binding to cellulose and water-vapour-recoverable mechanochromic luminescence10.1039/C6QM00187D ↗
5. Mechanochromic luminescence and aggregation induced emission of dinaphthoylmethane β-diketones and their boronated counterparts10.1021/acsami.5b09688 ↗
6. Aggregation-induced emission enhancement and reversible mechanochromic luminescence of quinoline-based zinc(Ⅱ)-Schiff base complexes10.1039/C9DT02177A ↗
7. Multi-functional bis(alkynyl)gold(Ⅲ) N⁁C complexes with distinct mechanochromic luminescence and electroluminescence properties10.1039/C7SC02410J ↗
8. Aggregation-induced emission and reversible mechanochromic luminescence of carbazole-based triphenylacrylonitrile derivatives10.1039/C6RA03310E ↗
9. Stacking-induced different performance of mechanochromic luminescence and room-temperature phosphorescence based on two analogous AIEgens synthesized by a green photo-oxidation reaction10.1039/D0TC04830E ↗
10. A synergy between the push-pull electronic effect and twisted conformation for high-contrast mechanochromic AIEgens10.1039/D0MH01251C ↗
11. Precise molecular design for BN-modified polycyclic aromatic hydrocarbons toward mechanochromic materials10.1039/D0TA06191C ↗
12. AIE-active and reversible mechanochromic tetraphenylethene-tetradiphenylacrylonitrile hybrid luminogens with re-writable optical data storage application10.1016/j.dyepig.2017.06.043 ↗
13. Aggregate fluorescence in conjugated polymers10.1016/0009-2614(95)00512-3 ↗
14. Aggregation quenching of luminescence in electroluminescent conjugated polymers10.1021/jp9839450 ↗
15. Aggregation-induced emission of 1-methyl-1,2,3,4,5-pentaphenylsilole10.1039/b105159h ↗
16. Piezofluorochromism of an aggregation-induced emission compound derived from tetraphenylethylene10.1002/asia.201000802 ↗
17. Piezofluorochromic and aggregation-induced-emission compounds containing triphenylethylene and tetraphenylethylene moieties10.1002/asia.201100211 ↗
18. A new piezochromic fluorescence and aggregation-induced emission compound containing tetraphenylethylene and triphenylamine moieties with morphology-alterable property10.1007/s10895-011-0990-4 ↗
19. Effects of substitution with donor-acceptor groups on the properties of tetraphenylethene trimer: aggregation-induced emission, solvatochromism, and mechanochromism10.1021/jp311360p ↗
20. Construction of soft porous crystal with silole derivative: strategy of framework design, multiple structural transformability and mechanofluorochromism10.1039/C1JM12673C ↗
21. Multistimuli two-color luminescence switching via different slip-stacking of highly fluorescent molecular sheets10.1021/ja1044665 ↗
22. Multifunctional organic fluorescent materials derived from 9, 10-distyrylanthracene with alkoxyl endgroups of various lengths10.1039/c2cc36263e ↗
23. A new ligand and its complex with multi-stimuli-responsive and aggregation-induced emission effects10.1039/c1cc13790e ↗
24. New thermally stable piezofluorochromic aggregation-induced emission compounds10.1021/ol102872x ↗
25. Aggregation-induced emission enhancement compounds containing triphenylamine-anthrylenevinylene and tetraphenylethene moieties10.1039/c0jm02571b ↗
26. Piezofluorochromism and morphology of a new aggregation-induced emission compound derived from tetraphenylethylene and carbazole10.1039/C1NJ20782B ↗
27. Multi-stimuli-responsive fluorescence switching of a donor-acceptor π-conjugated compound10.1021/jz200140c ↗
28. Reversible switching of the emission of diphenyldibenzofulvenes by thermal and mechanical stimuli10.1002/adma.201101059 ↗
29. Aggregation-induced emission of siloles10.1039/C5SC01946J ↗
30. New tetraphenylethene-based efficient blue luminophors: aggregation induced emission and partially controllable emitting color10.1039/C1JM14054J ↗
31. Siloles symmetrically substituted on their 2,5-positions with electron-accepting and donating moieties: facile synthesis, aggregation-enhanced emission, solvatochromism, and device application10.1039/C1SC00688F ↗
32. Efficient non-doped near infrared organic light-emitting devices based on fluorophores with aggregation-induced emission enhancement10.1021/cm3008733 ↗
33. Enhancing thermally activated delayed fluorescence characteristics by intramolecular B-N coordination in a phenylpyridine-containing donor-acceptor π-system10.1039/C7CC04875K ↗
34. Pyridyl pyrrolide boron complexes: the facile generation of thermally activated delayed fluorescence and preparation of organic light-emitting diodes10.1002/anie.201509231 ↗
35. Boron-based TADF emitters with improved OLED device efficiency roll-off and long lifetime10.1016/j.dyepig.2017.01.055 ↗
36. An organic emitter displaying dual emissions and efficient delayed fluorescence white OLEDs10.1002/adom.201801667 ↗
37. Thermally activated delayed fluorescent phenothiazine-dibenzo [a,j] phenazine-phenothiazine triads exhibiting tricolor-changing mechanochromic luminescence10.1039/C6SC04863C ↗
38. Phenothiazine-pyrene dyads: photoinduced charge separation and structural relaxation in the CT state10.1021/jp036250u ↗
39. Dual intramolecular charge-transfer fluorescence derived from a phenothiazine-triphenyltriazine derivative10.1021/jp501017f ↗
40. Highly efficient yellow nondoped thermally activated delayed fluorescence OLEDs by utilizing energy transfer between dual conformations based on phenothiazine derivatives10.1016/j.dyepig.2019.107636 ↗
41. Molecular conformation-dependent mechanoluminescence: same mechanical stimulus but different emissive color over time10.1002/anie.201809463 ↗
42. Bipolar tetraarylsilanes as universal hosts for blue, green, orange, and white electrophosphorescence with high efficiency and low efficiency roll-off10.1002/adfm.201002066 ↗
43. A blue thermally activated delayed fluorescence emitter developed by appending a fluorene moiety to a carbazole donor with meta-linkage for high-efficiency OLEDs10.1039/C7QM00605E ↗
44. High-performance green OLEDs using thermally activated delayed fluorescence with a power efficiency of over 100 lm W−110.1002/adma.201503782 ↗
45. Novel thermally activated delayed fluorescence materials-thioxanthone derivatives and their applications for highly efficient OLEDs10.1002/adma.201401393 ↗
46. Highly efficient organic light-emitting diodes from delayed fluorescence10.1038/nature11687 ↗
47. Using guest-host interactions to optimize the efficiency of TADF OLEDs10.1021/acs.jpclett.6b01542 ↗
48. Thermally activated delayed fluorescence material with aggregation-induced emission properties for highly efficient organic light-emitting diodes10.1039/C7TC04934J ↗
49. Purely organic materials with aggregation-induced delayed fluorescence for efficient nondoped OLEDs10.1002/adom.201800264 ↗
50. High-performance non-doped OLEDs with nearly 100% exciton use and negligible efficiency roll-off10.1002/anie.201802060 ↗
51. Aggregation‐induced delayed fluorescence based on donor/acceptor-tethered janus carborane triads: unique photophysical properties of nondoped OLEDs10.1002/anie.201603232 ↗
52. Aggregation-induced delayed fluorescence from phenothiazine-containing donor-acceptor molecules for high-efficiency non-doped organic light-emitting diodes10.1038/pj.2016.82 ↗
53. Achieving high-performance nondoped OLEDs with extremely small efficiency roll-off by combining aggregation-induced emission and thermally activated delayed fluorescence10.1002/adfm.201606458 ↗
54. Robust luminescent materials with prominent aggregation-induced emission and thermally activated delayed fluorescence for high-performance organic light-emitting diodes10.1021/acs.chemmater.7b00450 ↗
55. Highly efficient near-infrared delayed fluorescence organic light emitting diodes using a phenanthrene-based charge-transfer compound10.1002/anie.201506687 ↗
56. Highly efficient nondoped OLEDs with negligible efficiency roll-off fabricated from aggregation-induced delayed fluorescence luminogens10.1002/anie.201706752 ↗
57. Mechanical insights into aggregation-induced delayed fluorescence materials with anti-Kasha behavior10.1002/advs.201801629 ↗
58. Highly efficient thermally activated delayed fluorescence materials with reduced efficiency roll-off and low on-set voltages10.1039/C7QM00195A ↗
59. Molecular design to regulate the photophysical properties of multifunctional TADF emitters towards high-performance TADF-based OLEDs with EQEs up to 22.4% and small efficiency roll-offs10.1039/C7SC04669C ↗
60. An efficient exciton harvest route for high-performance OLEDs based on aggregation-induced delayed fluorescence10.1039/C7CC09925H ↗
61. Highly efficient non-doped OLEDs using aggregation-induced delayed fluorescence materials based on 10-phenyl-10 H-phenothiazine 5, 5-dioxide derivatives10.1039/C8TC03648A ↗
62. Molecular design for non-doped OLEDs based on a twisted heptagonal acceptor: delicate balance between rigidity and rotatability10.1002/anie.201915397 ↗
63. Triazatruxene-based small molecules with thermally activated delayed fluorescence, aggregation-induced emission and mechanochromic luminescence properties for solution-processable nondoped OLEDs10.1039/C8TC04721A ↗
64. Tetraphenylcyclopentadiene derivatives: aggregation induced emission, adjustable luminescence from green to blue, efficient undoped OLED performance and good mechanochromic properties10.1002/smll.201602285 ↗