Thermal annealing effects on the morphology and charge transport of polymer semiconductor nanowires aligned in an insulating polymer matrix
Source abstract
Abstract
Abstract Thermal annealing can profoundly affect the molecular ordering, orientation, morphologies, and charge transport of poly(3-hexylthiophene) (P3HT) nanowires (NWs) aligned within a polystyrene (PS) matrix. Upon thermal annealing, the structural and morphological changes of the aligned P3HT-NWs were systematically studied using static absorption spectroscopy, X-ray diffraction, atomic force microscopy, and polarized optical microscopy; the change in charge transport properties was investigated using macroscale charge carrier mobility measurements. Further, the thermal annealing temperature and duration were thoroughly correlated with the molecular ordering, orientation, and charge transport properties of the aligned P3HT-NW/PS blend films. It was revealed that charge transport of the aligned blend films is determined by the complicated interplay between molecular ordering, orientation, and morphologies, which are prone to change by post-thermal annealing conditions. The orientation of the aligned blend films decreased with increasing annealing temperature, while the molecular ordering improved as the temperature increased up to 150 °C, and then decreased with further increasing temperature. Significant morphological changes of the aligned blend films were observed after thermal annealing at 200 °C, owing to the remarkable increase in the thermally induced diffusion of the polymer chains. Consequently, the highest charge transport was measured in the aligned P3HT-NW/PS blend films annealed at 100 °C for 10 min. However, the charge transport was decreased by increasing either the annealing temperature or duration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Organic semiconductor/polymer blend films for organic field‐effect transistors10.1002/admt.201900104 ↗
2. Solution processable low‐voltage organic thin film transistors with high‐k relaxor ferroelectric polymer as gate insulator10.1002/adma.201103542 ↗
3. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate10.1016/j.solmat.2004.02.031 ↗
4. A molecular design principle of lyotropic liquid-crystalline conjugated polymers with directed alignment capability for plastic electronics10.1038/nmat3595 ↗
5. Large‐scale hierarchically structured conjugated polymer assemblies with enhanced electrical conductivity10.1002/anie.201209632 ↗
6. Anisotropic assembly of conjugated polymer nanocrystallites for enhanced charge transport10.1021/am506546k ↗
7. Air-stable polymer organic thin-film transistors by solution-processed encapsulation10.1016/j.orgel.2010.10.021 ↗
8. Multicomponent semiconducting polymer systems with low crystallization-induced percolation threshold10.1038/nmat1779 ↗
9. Tunable solubility parameter of poly (3-hexyl thiophene) with hydrophobic side-chains to achieve rubbery conjugated films10.1021/am507512m ↗
10. Photoinduced anisotropic assembly of conjugated polymers in insulating polymer blends10.1021/acsami.5b03310 ↗
11. Highly aligned and crystalline poly (3-hexylthiophene) thin films by off-center spin coating for high performance organic field-effect transistors10.1016/j.synthmet.2019.116221 ↗
12. Understanding solidification of polythiophene thin films during spin-coating: effects of spin-coating time and processing additives10.1038/srep13288 ↗
13. Enhancement in crystallinity of poly (3‐hexylthiophene) thin films prepared by low‐temperature drop casting10.1002/app.36447 ↗
14. Enhancement of field-effect mobility due to structural ordering in poly (3-hexylthiophene) films by the dip-coating technique10.1107/S0021889813004718 ↗
15. Fast deposition of aligning edge‐on polymers for high‐mobility ambipolar transistors10.1002/adma.201805761 ↗
16. Alignment and charge transport of one-dimensional conjugated polymer nanowires in insulating polymer blends10.1021/acs.macromol.6b01721 ↗
17. Low voltage operation of non-volatile flexible OFET memory devices using high-k P(VDF-TrFE) gate dielectric and polyimide charge storage layer10.1016/j.reactfunctpolym.2016.04.001 ↗
18. Root cause of hysteresis in organic thin film transistor with polymer dielectric10.1016/j.orgel.2006.03.006 ↗
19. Effects of thermal annealing upon the morphology of polymer–fullerene blends10.1002/adfm.201000975 ↗
20. Conjugated polymer/paraffin blends for organic field-effect transistors with high environmental stability10.1039/C9NR02425E ↗
21. Simple push coating of polymer thin-film transistors10.1038/ncomms2190 ↗
22. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
23. Macroscopic alignment of one-dimensional conjugated polymer nanocrystallites for high-mobility organic field-effect transistors10.1021/acsami.6b02216 ↗
24. Tuning local molecular orientation–composition correlations in binary organic thin films by solution shearing10.1002/adfm.201500468 ↗
25. Electric field tuning molecular packing and electrical properties of solution‐shearing coated organic semiconducting thin films10.1002/adfm.201605503 ↗
26. Effect of thermal annealing on the structural, optical and dielectrical properties of P3HT: PC70BM nanocomposites10.1016/j.materresbull.2016.02.023 ↗
27. Thermal annealing dependence of charge injection and transport in the P3HT: graphene nanocomposite based devices10.1016/j.physe.2020.114351 ↗
28. Thermal annealing-induced enhancement of the field-effect mobility of regioregular poly (3-hexylthiophene) films10.1063/1.2400796 ↗
29. Entanglement of conjugated polymer chains influences molecular self‐assembly and carrier transport10.1002/adfm.201301007 ↗
30. Determining exciton bandwidth and film microstructure in polythiophene films using linear absorption spectroscopy10.1063/1.3110904 ↗
31. π‐Conjugated donor polymers: structure formation and morphology in solution, bulk and photovoltaic blends10.1002/aenm.201700314 ↗
32. PLLA microalloys versus PLLA nanoalloys: preparation, morphologies, and properties10.1021/am3007577 ↗
33. Segmental mobility in the vicinity of Tg in PS/SBR blends: Nanodomain size prediction of the dispersed phase10.1002/app.37847 ↗
34. Controlled self-assembly of conjugated polymers via a solvent vapor pre-treatment for use in organic field-effect transistors10.3390/polym11020332 ↗
35. Large-scale alignment of polymer semiconductor nanowires for efficient charge transport via controlled evaporation of confined fluids10.1021/acsami.8b18055 ↗
36. Solvent additive-assisted anisotropic assembly and enhanced charge transport of π-conjugated polymer thin films10.1021/acsami.8b03221 ↗
37. Paracrystals representing the physical state of matter10.1088/0022-3719/21/23/004 ↗
38. Crystallization mechanism of 9, 9‐diphenyl‐dibenzosilole from solids10.1002/cphc.201900925 ↗
39. Film thickness dependence of the surface structure of immiscible polystyrene/poly (methyl methacrylate) blends10.1021/ma951140+ ↗
40. Swelling of poly (3-alkylthiophene) films exposed to solvent vapors and humidity: Evaluation of solubility parameters10.1016/j.synthmet.2007.07.015 ↗
41. Polymer vs solvent diagram of film structures formed in spin-cast poly (3-alkylthiophene) blends10.1021/ma7022974 ↗
42. Emergent surface topography enabled by concurrent crystallization and polymerization10.1021/acs.macromol.9b02703 ↗