journal article·2019-02

Electrochemical, photovoltaic and DFT studies on hybrid materials based on supramolecular self-assembly of a ditopic twisted perylene diimide with square-planar platinum(II)- and/or palladium(II)-2,2′:6′,2″-terpyridyl complex ions

Sebile Işık Büyükekşi, Efe Baturhan Orman, Nursel Acar, Ahmet Altındal, Ali Rıza Özkaya, Abdurrahman Şengül

Dyes and Pigments· Volume 161
Publisher page

Abstract

Abstract A ditopic bridging ligand, N,N′-bis(pyridine)-1,6,7,12-tetrakis-(4-methoxyphenoxy)perylene diimide (1) was synthesized. Metallosupramolecular self-assembly of 1 with 2,2′:6′,2″-terpyridyl-platinum(II) and/or -palladium(II) complex ions afforded to new triads [(terpy)M(II)-(1)-M(II)(terpy)](NO3)4 where, M(II) = Pt(II) (2), and Pd(II) (3), respectively. These isolated triads 2 and 3 and also free ligand 1 were fully characterized by FT-IR, 1H NMR, 13C DEPT NMR, 1H-1H COSY NMR, MALDI TOF and HRMS (MALDI-TOF/TOF-MS) mass techniques and UV/Vis spectroscopy. DFT studies revealed that the molecular structure of 1 is highly distorted and deviated from the planarity by bulky methoxyphenyl groups at bay positions. The calculated HOMO and LUMO are located on the PDI core and phenyl groups, and the band gap was found to be 2.27, 2.23 and 2.24 eV in DMSO for 1, 2 and 3, respectively. The calculated UV/Vis spectra are in good agreement with those of experimental results. Electrochemical, in situ spectroelectrochemical and in situ electrocolorimetric measurements in solution suggested that redox processes of the compounds are accompanied by favourable electron transport properties with remarkably narrow HOMO-LUMO gaps and intense light absorption over the visible range. The association of usually reversible and fast electron transfer processes with the net colour changes in solution pointed out the applicability of the compounds as an electrochromic material. The electrochromic performance measurements with the films of the compounds on indium tin oxide glass provided additional support for their usability as a colour changing material in electrochromic devices. Surface morphologies of the films were characterized by scanning electron microscopy (SEM). The metal complexes of 1, especially the platinum(II) complex (2), behaved as a good neutral and cathodic colouring electrochromic material with fast response time, long-term stability, and long-term write erase efficiency. The photovoltaic performance of the compounds as electron acceptor material was investigated by varying their relative ratio in the bulk heterojunction solar cells. It was found that the photovoltaic conversion efficiency of the devices strongly depends on the blend ratio. The optimized performance for the devices was obtained with the P3HT:PDIs (weight ratio 1.0:1.5) blended films. For this blend ratio, the device showed a maximum conversion efficiency of 3.91%, 8.17% and 5.18% for 1, 2 and 3, respectively. The results obtained reveal that employing 2 as an acceptor material has great potential for the development of highly efficient nonfullerene bulk heterojunction photovoltaic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A perylene diimide rotaxane: synthesis, structure and electrochemically driven de‐threading10.1002/chem.201103090 ↗
2. Synthesis, Electrochemical and Optical Absorption Properties of New Perylene‐3, 4: 9, 10‐bis (dicarboximide) and Perylene‐3, 4: 9, 10‐bis (benzimidazole) derivatives10.1002/ejoc.201100513 ↗
3. Photophysics and electrochemistry of a platinum-acetylide disubstituted perylenediimide10.1039/C3DT50874A ↗
5. A decade journey in the chemistry of sandwich-type tetrapyrrolato− rare earth complexes10.1021/ar800097s ↗
6. Single-molecule magnetism of tetrapyrrole lanthanide compounds with sandwich multiple-decker structures10.1016/j.ccr.2015.07.004 ↗
7. Electrochemical and photovoltaic studies on water soluble triads: metallosupramolecular self-assembly of ditopic bis(imidazole)perylene diimide with platinum(II)-, and palladium(II)-2,2′:6′,2″-terpyridyl complex ions10.1016/j.dyepig.2017.05.032 ↗
8. Spectroscopic, electrochemical and photovoltaic properties of Pt(II) and Pd(II) complexes of a chelating 1,10-phenanthroline appended perylene diimide10.1039/C7DT04713D ↗
9. A conformationally stressed novel ball-type perylenediimide appended zinc (II) phthalocyanine hybrid: spectroelectrochemical, electrocolorimetric and photovoltaic properties10.1039/C4DT01761G ↗
10. Synthesis and electrochemical, electrochromic and electrical properties of novel s-triazine bridged trinuclear Zn (II), Cu (II) and Lu (III) and a tris double-decker Lu (III) phthalocyanines10.1016/j.synthmet.2011.04.012 ↗
11. Mono and double-decker lutetium phthalocyanines bearing iodine groups: electrochemical and electrochromic properties10.1149/2.0421610jes ↗
12. A perylene bisimide network for high-performance n-type electrochromism10.1039/C6CC07962H ↗
13. Spectroelectrochemical characterisation of Langmuir–Schaefer films of heteroleptic phthalocyanine complexes. Potential applications10.1016/j.colsurfa.2005.10.069 ↗
14. Syntheses and studies of electron/energy transfer of new dyads based on an unsymmetrical perylene diimide incorporating chelating 1,10-phenanthroline and its corresponding square-planar complexes with dichloroplatinum(II) and dichloropalladium(II)10.1039/C8DT01135D ↗
15. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
16. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
17. Preparation of efficient oligomer-based bulk-heterojunction solar cells from eco-friendly solvents10.1039/C7TC02131C ↗
18. Polymer‐fullerene bulk‐heterojunction solar cells10.1002/adma.200801283 ↗
19. Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells10.1016/j.solmat.2010.02.041 ↗
20. Ferrocene-diketopyrrolopyrrole based non-fullerene acceptors for bulk heterojunction polymer solar cells10.1039/C7TA03322B ↗
21. Towards high-efficiency non-fullerene organic solar cells: matching small molecule/polymer donor/acceptor10.1016/j.orgel.2014.06.025 ↗
22. Small molecule bulk-heterojunction solar cells composed of two discrete organic semiconductors10.1246/cl.141041 ↗
23. High‐performance non‐fullerene organic solar cells based on a selenium‐containing polymer donor and a twisted perylene bisimide acceptor10.1002/advs.201600117 ↗
24. Solvent additive control of morphology and crystallization in semiconducting polymer blends10.1002/adma.201103097 ↗
25. In‐depth understanding of photocurrent enhancement in solution‐processed small‐molecule: perylene diimide non‐fullerene organic solar cells10.1002/pssa.201532102 ↗
26. Perylene diimides based materials for organic solar cells10.1016/j.dyepig.2013.01.020 ↗
27. Perylene diimide trimers based bulk heterojunction organic solar cells with efficiency over 7%10.1002/aenm.201600060 ↗
28. Synthesis, self-assembly, and solar cell performance of N-Annulated perylene diimide non-fullerene acceptors10.1021/acs.chemmater.6b03292 ↗
29. Synergetic solvent engineering of film nanomorphology to enhance planar perylene diimide-based organic photovoltaics10.1021/acsami.6b08284 ↗
30. Dimorphism in a 2, 2′, 2 ″-terpyridyl compound10.1023/A:1007120731989 ↗
31. Synthesis and reactivity of [PdCl (terpy)] Cl10.1007/s007060070059 ↗
32. Frisch MJ, Trucks GW, Schlegel HB, Scuseria GE, Robb MA, Cheeseman JR, et al. Gaussian Inc. Wallingford, CT. 2009.
33. 92612 USA: Spartan’08 for windows, Wavefunction, Inc. Irvine, CA.
34. Dennington · 2009
35. Self-consistent equations including exchange and correlation effects10.1103/PhysRev.140.A1133 ↗
36. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
37. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
38. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
39. A new hybrid exchange–correlation functional using the Coulomb-attenuating method (CAM-B3LYP)10.1016/j.cplett.2004.06.011 ↗
40. Dunning · 1977 · 1
41. Ab initio effective core potentials for molecular calculations. Potentials for the transition metal atoms Sc to Hg10.1063/1.448799 ↗
42. Ab initio effective core potentials for molecular calculations. Potentials for main group elements Na to Bi10.1063/1.448800 ↗
43. Ab initio effective core potentials for molecular calculations. Potentials for K to Au including the outermost core orbitals10.1063/1.448975 ↗
44. The IEF version of the PCM solvation method: an overview of a new method addressed to study molecular solutes at the QM ab initio level10.1016/S0166-1280(98)00553-3 ↗
45. Quantum mechanical continuum solvation models10.1021/cr9904009 ↗
46. Ambipolar organic semiconductors from electron-accepting cyclopenta-fused anthracene10.1039/C2CC34992B ↗
47. The synthesis of novel, unsymmetrically substituted, chiral naphthalene and perylene diimides: photophysical, electrochemical, chiroptical and intramolecular charge transfer properties10.1016/j.dyepig.2009.04.014 ↗
48. Oligothiophene-functionalized perylene bisimide system: synthesis, characterization, and electrochemical polymerization properties10.1021/cm048642z ↗
49. Polythiophene: perylene diimide solar cells–the impact of alkyl‐substitution on the photovoltaic performance10.1002/aenm.201000006 ↗
50. Towards rational design of organic electron acceptors for photovoltaics: a study based on perylenediimide derivatives10.1039/c3sc51841h ↗
51. Molecular geometry regulation of bay-phenyl substituted perylenediimide derivatives with bulky alkyl chain for use in organic solar cells as the electron acceptor10.1016/j.dyepig.2016.08.065 ↗
52. Time‐dependent morphology evolution by annealing processes on polymer: fullerene blend solar cells10.1002/adfm.200800968 ↗
53. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
54. 6.5% Efficiency of polymer solar cells based on poly (3‐hexylthiophene) and indene‐C60 bisadduct by device optimization10.1002/adma.201001339 ↗
55. Recent progress and future aspects of organic solar cells10.1002/pip.1141 ↗
56. Relating the morphology of poly (p‐phenylene vinylene)/methanofullerene blends to solar‐cell performance10.1002/adfm.200305049 ↗
57. Composition-dependent phase separation of P3HT: PCBM composites for high performance organic solar cells10.1016/j.orgel.2010.02.013 ↗
58. Design rules for donors in bulk‐heterojunction solar cells—towards 10% energy‐conversion efficiency10.1002/adma.200501717 ↗
59. Offset energies at organic semiconductor heterojunctions and their influence on the open-circuit voltage of thin-film solar cells10.1103/PhysRevB.75.115327 ↗
60. Cathode dependence of the open-circuit voltage of polymer: fullerene bulk heterojunction solar cells10.1063/1.1620683 ↗
61. Origin of the open circuit voltage of plastic solar cells10.1002/1616-3028(200110)11:5<374::AID-ADFM374>3.0.CO;2-W ↗
62. Energy level alignment at the interfaces in a multilayer organic light-emitting diode structure10.1103/PhysRevB.79.245308 ↗
63. Polymer: fullerene bulk heterojunction solar cells10.1016/S1369-7021(11)70210-3 ↗