journal article·2020-06

Non-fullerene electron acceptors constructed by simple electron-withdrawing core: Distinct effect of bithiazole vs thiazolothiazole core on photovoltaic properties

Yingshuang Zhang, Xiangjun Zheng, Wei Tang, Wenhong Peng, Hao Xia, Jianing Zhu, Mengbing Zhu, Weijie Chi, Hua Tan, Weiguo Zhu

Dyes and Pigments· Volume 177
Publisher page

Abstract

Abstract Developing simple-structure and high-efficiency non-fullerene small molecule acceptors (NF-SMAs) are crucial for application of organic solar cells (OSCs). To deeply understand the effect of electron-withdrawing central building block on photo-electronic properties and better design simple-structure NF-SMAs, in this work, a novel simple SMA of BTz1 with an A (π-A′-A″)2 framework was synthesized and characterized, in which a unfused-ring weak acceptor (A) of bithiazole and two adjacent strong acceptors of A′-A″ are used as molecular central and terminal units, respectively. And the UV absorption, energy level, crystallinity, mobility, morphology and photovoltaic per-formance of BTz1 were studied systematically. It is found that BTz1 exhibits similar molecular conformations and photophysical properties, but a low HOMO and high LUMO energy level in comparison with its analogue of TTz1 based on thiazolothiazole center. Furthermore, significant different photovoltaic properties are observed in the BTz1 and TTz1 based PSCs using polymer J71 as donor in an inverted device structure. The BTz1-based OSCs exhibit an ascending open-circuit voltage (Voc) of 0.96 V, but TTz1-based devices display a significantly increasing power conversion efficiency (PCE) of 8.77%. The better film morphology of photoactive layer makes the TTz1-based OSCs exhibit higher PCE than the BTz1-based OSCs. This work indicates that tuning electron-withdrawing central structure is crucial to construct simple-structure and high-efficiency NF-SMAs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
2. Effects of the number of bromine substitution on photovoltaic efficiency and energy loss of benzo [1, 2-b: 4, 5-b′] diselenophene-based narrow-bandgap multibrominated nonfullerene acceptors10.1002/solr.201800250 ↗
3. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
4. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
5. Highly efficient organic solar cells based on S, N-heteroacene non-fullerene acceptors10.1021/acs.chemmater.8b02276 ↗
6. Single-junction polymer solar cells with 16.35% efficiency enabled by a platinum (II) complexation strategy10.1002/adma.201901872 ↗
7. Eco-compatible solvent-processed organic photovoltaic cells with over 16% efficiency10.1002/adma.201903441 ↗
8. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
9. Over 16% efficiency organic photo- voltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
10. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
11. New anthracene-fused nonfullerene acceptors for high-efficiency organic solar cells: energy level modulations enabling match of donor and acceptor10.1002/aenm.201803541 ↗
12. Reduced energy loss enabled by a chlorinated thiophene-fused ending-group small molecular acceptor for efficient nonfullerene organic solar cells with 13.6% efficiency10.1002/aenm.201900041 ↗
13. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
14. Environmentally friendly solvent-processed organic solar cells that are highly efficient and adaptable for the blade‐coating method10.1002/adma.201704837 ↗
15. An alkylated indacenodithieno [3, 2-b] thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
16. A fused ring electron acceptor with decacyclic core enables over 13.5% efficiency for organic solar cells10.1002/aenm.201802050 ↗
17. Fine-tuned photoactive and interconnection layers for achieving over 13% efficiency in a fullerene-free tandem organic solar cell10.1021/jacs.7b01493 ↗
18. A tandem organic solar cell with PCE of 14.52% employing subcells with the same polymer donor and two absorption complementary acceptors10.1002/adma.201804723 ↗
19. Soluble dicyanodistyrylbenzene-based non-fullerene electron acceptors with optimized aggregation behavior for high-efficiency organic solar cells10.1002/aenm.201400929 ↗
20. An unfused-core-based nonfullerene acceptor enables high-efficiency organic solar cells with excellent morphological stability at high temperatures10.1002/adma.201705208 ↗
21. Simple-structured small molecule acceptors constructed by a weakly electron-deficient thiazolothiazole core for high-efficiency non-fullerene organic solar cells10.1039/C8TA09370A ↗
22. Revealing the effects of molecular packing on the performances of polymer solar cells based on A-D-C-D-A type non-fullerene acceptors10.1039/C8TA03753A ↗
23. F-substituted oligothiophenes serve as nonfullerene acceptors in polymer solar cells with open-circuit voltages > 1 V10.1039/C8TA02781A ↗
24. Synthesis and photovoltaic properties of a simple non-fused small molecule acceptor10.1016/j.orgel.2018.04.005 ↗
25. Combining fused-ring and unfused-core electron acceptors enables efficient ternary organic solar cells with enhanced fill factor and broad compositional tolerance10.1002/solr.201900317 ↗
26. Simple bithiophene-rhodanine-based small molecule acceptor for use in additive-free nonfullerene OPVs with low energy loss of 0.51 eV10.1002/aenm.201804021 ↗
27. Simple and versatile non-fullerene acceptor based on benzothiadiazole and rhodanine for organic solar cells10.1021/acsami.9b09256 ↗
28. Simple-structured NIR-absorbing small molecule acceptors with thiazolothiazole core: multiple noncovalent conformational locks and D-A effect for efficient OSCs10.1021/acsami.9b16686 ↗
29. Simple non-fused electron acceptors for efficient and stable organic solar cells10.1038/s41467-019-10098-z ↗
30. Enhancing the Jsc of P3HT-based OSCs via a thiophene-fused aromatic heterocycle as a “π-bridge” for A-π-D-π-A-type acceptors10.1021/acsami.9b08007 ↗
31. Highly efficient halogen-free solvent processed small-molecule organic solar cells enabled by material design and device engineering10.1039/C7EE00805H ↗
32. Small molecule acceptors with indaceno dithiophene-benzodithiophene-indacenodithiophene as donating cores for solution-processed non- fullerene solar cells10.1016/j.cplett.2019.04.024 ↗
33. Significant enhancement of photovoltaic performance through introducing S⋯N conformational locks10.1039/C7TA05774A ↗
34. Enhanced efficiency of polymer solar cells by improving molecular aggregation and broadening the absorption spectra10.1016/j.dyepig.2019.03.014 ↗
35. 15% efficiency tandem organic solar cell based on a novel highly efficient wide-bandgap nonfullerene acceptor with low energy loss10.1002/aenm.201803657 ↗
36. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
37. End group tuning in acceptor-donor-acceptor nonfullerene small molecules for high fill factor organic solar cells10.1002/adfm.201808429 ↗
38. An effective heteroatom-substituted strategy on photovoltaic properties of D (A-Ar)2 small molecules for efficient organic solar cells10.1016/j.dyepig.2019.107595 ↗
39. Non-toxic green food additive enables efficient polymer solar cells through adjusting phase composition distribution and boosting charge transport10.1039/C9TC06571G ↗
40. The comprehensive utilization of the synergistic effect of fullerene and non-fullerene acceptors to achieve highly efficient polymer solar cells10.1039/C9TA04286E ↗
41. Significant influence of the benzothiophene ring substitution position on the photovoltaic performance of benzodithiophene-based donor polymers10.1039/C9TC06594F ↗
42. An A-D-D-A-type non-fullerene small-molecule acceptor with strong near-infrared absorption for high performance polymer solar cells10.1039/C9TC04898G ↗
43. Revealing the position effect of an alkylthio side chain in phenyl-substituted benzodithiophene-based donor polymers on the photovoltaic performance of non-fullerene organic solar cells10.1021/acsami.9b07112 ↗
44. Spirobifluorene-cored wide bandgap non-fullerene small molecular acceptor with 3D structure for organic solar cells10.1016/j.dyepig.2018.11.016 ↗
45. Wan · J Mater Chem A · 2019 · 7 · 1180210.1039/C9TA03177D ↗
46. Modulation of end groups for low-bandgap nonfullerene acceptors enabling high-performance organic solar cells10.1002/aenm.201801203 ↗
47. Achieving both enhanced voltage and current through fine-tuning molecular backbone and morphology control in organic solar cells10.1002/aenm.201901024 ↗