journal article·2019-07

Impact of an electron withdrawing group on the thiophene-fused benzotriazole unit on the photovoltaic performance of the derived polymer solar cells

Xiu Jiang, Jiacheng Wang, Wei Wang, Yang Yang, Xiaowei Zhan, Xingguo Chen

Dyes and Pigments· Volume 166
Publisher page

Abstract

Abstract In this work, two new donor-acceptor (D-A) copolymers (P32 and P33) for non-fullerene polymer solar cells (PSCs) have been synthesized based on a thiophene-fused benzotriazole (BTAZT) unit and thiophene substituted benzodithiophene (BDTT) unit, in which two different electron-withdrawing groups (i.e., fluorine and ester groups) have been introduced at the side of BTAZT unit, respectively. It is found that P32 with a long alkyl chain ester group shows a more redshifted intramolecular charge transfer absorption, and also exhibits a better complementary absorption spectrum with a small molecular acceptor based on the dithienocyclopentathieno[3,2-b]thiophene core end-capped with 1,1-dicyanomethylene-3-indanone unit (IHIC) than P33. Moreover, P32:IHIC blended film shows higher and more balanced hole/electron charge mobilities as well as better morphologies with more suitable phase separation scale for efficient charge separation and transport than P33:IHIC blended film. Thus, the P32:IHIC based PSC device exhibits the higher power conversion efficiency of 8.35% with higher short-circuit current density (JSC = 16.77 mA cm−2) and fill factor (FF = 64.89%) compared with the P32:IHIC based PSC device, indicating that the different electron-withdrawing side groups at BTAZT unit exerts a significant influence on the properties of the polymers as well as the photovoltaic performances of the PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. Efficient photodiodes from interpenetrating polymer networks10.1038/376498a0 ↗
2. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
3. Ultrathin and lightweight organic solar cells with high flexibility10.1038/ncomms1772 ↗
4. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
5. Synthesis and photovoltaic properties of a series of narrow bandgap organic semiconductor acceptors with their absorption edge reaching 900 nm10.1021/acs.chemmater.7b03928 ↗
6. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
7. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency
8. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
9. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗
10. Non-fullerene-acceptor-based bulk-heterojunction organic solar cells with efficiency over 7%10.1021/jacs.5b06414 ↗
11. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
12. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra‐narrow band gap10.1002/anie.201610944 ↗
13. Covalently bound clusters of alpha-substituted PDI: rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
14. New wide band gap donor for efficient fullerene-free all-small-molecule organic solar cells10.1021/jacs.6b11612 ↗
15. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells10.1002/adma.201704904 ↗
16. Balanced partnership between donor and acceptor components in nonfullerene organic solar cells with> 12% efficiency10.1002/adma.201706363 ↗
17. Fine-tuning of molecular packing and energy level through methyl substitution enabling excellent small molecule acceptors for nonfullerene polymer solar cells with efficiency up to 12.54%10.1002/adma.201706124 ↗
18. Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
19. High-performance solution-processed non-fullerene organic solar cells based on selenophene-containing perylene bisimide acceptor10.1021/jacs.5b11149 ↗
20. Ladder-type dithienonaphthalene-based small-molecule acceptors for efficient nonfullerene organic solar cells10.1021/acs.chemmater.7b02887 ↗
21. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
22. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-withdrawing core10.1016/j.joule.2019.01.004 ↗
23. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
24. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
25. Mapping polymer donors toward high-efficiency fullerene free organic solar cells
26. Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments10.1021/ja409881g ↗
27. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
28. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
29. Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer− fullerene solar cells10.1021/ja1112595 ↗
30. Conjugated side-chain-isolated D−A copolymers based on benzo[1,2-b:4,5-b]']dithiophene-alt-dithienylbenzotriazole: synthesis and photovoltaic properties10.1021/cm3017006 ↗
31. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
32. Dithieno [3, 2-b:2’,3’-d] pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells
33. Polymer solar cells with 90% external quantum efficiency featuring an ideal light‐and charge‐manipulation layer
34. Carbon-oxygen-bridged ladder-type building blocks for highly efficient nonfullerene acceptors
35. Effect of isomerization on high-performance nonfullerene electron acceptors10.1021/jacs.8b04027 ↗
36. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors
37. An alkylated indacenodithieno [3, 2‐b] thiophene‐based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
38. Fused hexacyclic nonfullerene acceptor with strong near-infrared absorption for semitransparent organic solar cells with 9.77% efficiency
39. A planar electron acceptor for efficient polymer solar cells10.1039/C5EE02477C ↗
40. A facile planar fused-ring electron acceptor for as-cast polymer solar cells with 8.71% efficiency10.1021/jacs.6b00853 ↗
41. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
42. Enhancing the performance of polymer solar cells via core engineering of NIR‐absorbing electron acceptors10.1002/adma.201706571 ↗
43. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
44. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
45. Enhancing performance of nonfullerene acceptors via side‐chain conjugation strategy
46. Naphthodithiophene‐based nonfullerene acceptor for high‐performance organic photovoltaics: effect of extended conjugation
47. Fused tris (thienothiophene)‐Based electron acceptor with strong near‐infrared absorption for high‐performance as‐cast solar cells
48. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
49. Highly efficient nonfullerene polymer solar cells enabled by a copper (I) coordination strategy employing an 1, 3, 4‐oxadiazole‐containing wide‐bandgap copolymer donor10.1002/adma.201800737 ↗
50. High‐performance polymer solar cells based on a wide‐bandgap polymer containing pyrrolo [3, 4-f] benzotriazole‐5, 7‐dione with a power conversion efficiency of 8.63%10.1002/advs.201600032 ↗
51. Eco‐friendly solvent‐processed fullerene‐free polymer solar cells with over 9.7% efficiency and long‐term performance stability10.1002/aenm.201700566 ↗
52. Structures and properties of conjugated Donor-Acceptor copolymers for solar cell applications10.1039/c2jm14951f ↗
53. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
54. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor
55. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
56. High-performance non‐fullerene polymer solar cells based on fluorine substituted wide bandgap copolymers without extra treatments10.1002/solr.201700020 ↗
57. Green solvent-processed efficient non-fullerene organic solar cells enabled by low-bandgap copolymer donors with EDOT Side chains10.1039/C8TA10882J ↗
58. Carboxylate substitution position influencing polymer properties and enabling non-fullerene organic solar cells with high open circuit voltage and low voltage loss10.1039/C8TA04935A ↗
59. High‐performance wide bandgap copolymers using an EDOT modified benzodithiophene donor block with 10.11% efficiency10.1002/aenm.201602773 ↗
60. Poly (isothianaphthene)10.1021/jo00192a027 ↗
61. Regioregular oligomer and polymer containing thieno [3, 4-b] thiophene moiety for efficient organic solar cells10.1021/ma8023969 ↗
62. Series of quinoidal methyl-dioxocyano-pyridine based π-extended narrow-bandgap oligomers for solution-processed small-molecule organic solar cells10.1021/acs.chemmater.5b01350 ↗
63. Thiophene-fused benzothiadiazole: a strong electron-acceptor unit to build D–A copolymer for highly efficient polymer solar cells10.1021/cm501052a ↗
64. Constructing D–A copolymers based on thiophene-fused benzotriazole units containing different alkyl Side-chains for non-fullerene polymer solar cells10.1039/C7TC02098H ↗
65. Design of a thiophene-fused benzotriazole unit as an electron acceptor to build D–A copolymers for polymer solar cells10.1039/C7TC00083A ↗
66. Fluorinated thieno [2',3':4, 5] benzo [1, 2-d][1, 2, 3] triazole: new acceptor unit to construct polymer donors10.1021/acsomega.8b02053 ↗
67. Narrow bandgap non-fullerene acceptor based on a thiophene-fused benzothiadiazole unit with a high short-circuit current density of over 20 mA cm-210.1039/C8TA00704G ↗
68. Balancing high open circuit voltage over 1.0 V and high short circuit current in benzodithiophene-based polymer solar cells with low energy loss: a synergistic effect of fluorination and alkylthiolation
69. Fluorinated and alkylthiolated polymeric donors enable both efficient fullerene and nonfullerene polymer solar cells
70. Relating open-circuit voltage losses to the active layer morphology and contact selectivity in organic solar cells10.1039/C8TA01195H ↗
71. Can morphology tailoring improve the open circuit voltage of organic solar cells?10.1063/1.3672221 ↗