A conjugated polymer based on alkylthio-substituted benzo[1,2-c:4,5-c’]dithiophene-4,8-dione acceptor for polymer solar cells
Source abstract
Abstract
Abstract In this work, the 2,5-di(alkyl)thiophene unit was replaced with a 2,5-di(alkylthio)thiophene moiety on benzo [1,2-c:4,5-c’]dithiophene-4,8-dione (BDD) unit. The di(alkylthio) substituted BDD was used to obtain a novel copolymer PSBDB-T via Stille polymerization. PSBDB-T shows good solubility and excellent thermal stability. The opto-electronic properties of PSBDB-T were investigated. PSBDB-T has a broad absorption range from 300 nm to 700 nm and deep highest occupied molecular orbital (HOMO) level due to the alkylthio units, which can improve the open-circuit voltage. A solar cell based on PSBDB-T as donor and a near infrared absorbing non-fullerene acceptor achieves a power conversion efficiency (PCE) of 5.0%, which is lower than its analogous polymer PBDB-T with a PCE of 8.8%. The studies of organic field-effect transistors and space charge limited current (SCLC) measurement indicate that PSBDB-T shows a significantly low hole mobility, which is responsible for the low photocurrent and fill factor in solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
2. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
3. Design of a new small-molecule electron acceptor enables efficient polymer solar cells with high fill factor10.1002/adma.201704051 ↗
4. Diketopyrrolopyrrole-based conjugated polymers with perylene bisimide side chains for single-component organic solar cells10.1021/acs.chemmater.7b02534 ↗
5. Multifunctional diketopyrrolopyrrole-based conjugated polymers with perylene bisimide side chains10.1002/marc.201700611 ↗
6. “Double-Cable” conjugated polymers with linear backbone toward high quantum efficiencies in single-component polymer solar cells10.1021/jacs.7b10499 ↗
7. Three-bladed rylene propellers with three-dimensional network assembly for organic electronics10.1021/jacs.6b04368 ↗
8. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
9. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
10. New developments in non-fullerene small molecule acceptors for polymer solar cells10.1039/C6QM00247A ↗
11. Star-shaped small molecule acceptors with a subphthalocyanine core for solution-processed non-fullerene solar cells10.1016/j.dyepig.2018.07.050 ↗
12. Non-fullerene small molecular acceptors with a carbazole core for organic solar cells with high open-circuit voltage10.1016/j.dyepig.2017.07.014 ↗
13. Polymer solar cells with diketopyrrolopyrrole conjugated polymers as the electron donor and electron acceptor10.1002/adma.201305910 ↗
14. The design of highly efficient polymer solar cells with outstanding short-circuit current density based on small band gap electron acceptor10.1016/j.dyepig.2017.12.017 ↗
15. An electron acceptor with porphyrin and perylene bisimides for efficient non-fullerene solar cells10.1002/anie.201612090 ↗
16. Triplet tellurophene-based acceptors for organic solar cells10.1002/anie.201712011 ↗
17. Achieving high-performance ternary organic solar cells through tuning acceptor alloy10.1002/adma.201603154 ↗
18. Star-Shaped electron acceptor based on naphthalenediimide-porphyrin for non-fullerene organic solar cells10.3866/PKU.WHXB201709112 ↗
19. Simple non-fullerene electron acceptors with unfused core for organic solar cells10.1016/j.cclet.2018.09.014 ↗
20. Ethynyl-linked perylene bisimide based electron acceptors for non-fullerene organic solar cells10.1016/j.cclet.2017.08.016 ↗
21. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
22. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
23. Mapping polymer donors toward high-efficiency fullerene free organic solar cells10.1002/adma.201604155 ↗
24. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
25. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
26. Effect of alkyl side chains of conjugated polymer donors on the device performance of non-fullerene solar cells10.1021/acs.macromol.6b01326 ↗
27. Non-fullerene organic solar cells based on diketopyrrolopyrrole polymers as electron donors and ITIC as an electron acceptor10.1039/C7CP00494J ↗
28. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
29. Organic solar cells with an efficiency approaching 15%
30. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
31. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells10.1039/C7CP04780K ↗
32. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
33. An alkylated indacenodithieno[3,2-b]thiophene-based nonfullerene acceptor with high crystallinity exhibiting single junction solar cell efficiencies greater than 13% with low voltage losses10.1002/adma.201705209 ↗
34. Realizing small energy loss of 0.55 eV, high open-circuit voltage >1 V and high efficiency >10% in fullerene-free polymer solar cells via energy driver10.1002/adma.201605216 ↗
35. Boosting the performance of non-fullerene organic solar cells via cross-linked donor polymers design
36. A polythiophene derivative with superior properties for practical application in polymer solar cells10.1002/adma.201401494 ↗
37. Recent advances in wide-bandgap photovoltaic polymers10.1002/adma.201605437 ↗
38. Effect of mono alkoxy-carboxylate-functionalized benzothiadiazole-based donor polymers for non-fullerene solar cells
39. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
40. Halogenated conjugated molecules for ambipolar field-effect transistors and non-fullerene organic solar cells10.1039/C7QM00025A ↗
41. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
42. Fine-tuning of the chemical structure of photoactive materials for highly efficient organic photovoltaics10.1038/s41560-018-0263-4 ↗
43. Low band-gap conjugated polymers with strong interchain aggregation and very high hole mobility towards highly efficient thick-film polymer solar cells10.1002/adma.201305092 ↗
44. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
45. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
46. Achieving over 9.8% efficiency in nonfullerene polymer solar cells by environmentally friendly solvent processing10.1021/acsami.7b11488 ↗
47. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
48. The crucial role of chlorinated thiophene orientation in conjugated polymers for photovoltaic devices10.1002/anie.201807865 ↗
49. High-performance polymer solar cells based on a 2D-conjugated polymer with an alkylthio side-chain10.1039/C5EE03684D ↗
50. Synthesis and photovoltaic properties of D-A copolymers based on alkylthio-thiophene or alkylthio-selenophene-BDT donor unit and DPP acceptor unit10.1016/j.orgel.2016.02.040 ↗
51. Influence of polymer side chains on the photovoltaic performance of non-fullerene organic solar cells10.1039/C6TC04983D ↗