Structure-performance correlation of indacenodithiophene-based narrow band-gap polymers with pendant diketopyrrolopyrrole units
Source abstract
Abstract
Abstract Two novel indacenodithiophene (IDT) based narrow band-gap polymers (PIDT-BDTDPP and PIDT-TDPP) with pendant diketopyrrolopyrrole (DPP) units onto different main chains were designed and synthesized. The structures and properties of these main chain donor-side chain acceptor D-A copolymers were fully characterized. The PIDT-TDPP with pendant DPP units onto thiophene (T) units exhibited better light-harvesting properties and charge transport properties. While the PIDT-BDTDPP with pendant DPP units onto benzo[1,2- b :4,5- b ′]dithiophene (BDT) units displayed lower the highest occupied molecular orbital energy levels (HOMO). By blending these polymers as light-harvesting electron donors with (6,6)-phenyl-C 61 -butyric acid methyl ester (PC 61 BM) electron acceptors in bulk heterojunction solar cells, it was found that the PIDT-TDPP-based PSCs shown better photovoltaic performance and a power conversion efficiency (PCE) of 3.62%, an open-circuit voltage ( V OC ) of 0.79 V, a short-circuit current ( J SC ) of 9.27 mA cm −2 and a fill factor ( FF ) of 49.7% were achieved. The PCE level is 1.88 times higher than that in the PIDT-BDTDPP-based PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Influence of processing parameters and molecular weight on the morphology and properties of high-performance PffBT4T-2OD: PC71BM organic solar cells10.1002/aenm.201501400 ↗
2. Terthiophene-based D-A polymer with an asymmetric arrangement of alkyl chains that enables efficient polymer solar cells10.1021/jacs.5b08556 ↗
3. Single-junction polymer solar cells with high efficiency and photovoltage10.1038/nphoton.2015.6 ↗
4. Dithieno[3,2-b:2′,3′ -d]pyridin-5(4h)-one based d-a type copolymers with wide bandgaps of up to 2.05 ev to achieve solar cell efficiencies of up to 7.33%10.1039/C6SC01791F ↗
5. Design and synthesis of copolymers of indacenodithiophene and naphtho[1,2-c:5,6- c]bis(1,2,5-thiadiazole) for polymer solar cells10.1021/ma400355w ↗
6. A new polythiophene derivative for high efficiency polymer solar cells with PCE over 9%10.1002/aenm.201600430 ↗
7. New alkylfuranyl-substituted benzo[1,2-b:4,5-b′]dithiophene-based donor-acceptor polymers for highly efficient solar cells10.1021/ma3025738 ↗
8. Synthesis and photovoltaic performance of N-dioctylmethyl-2,7-carbazole-alt-5,7-bis(thiophen- 2-yl)-2,3-biphenyl-thieno[3,4-b]pyrazine copolymeric derivatives appending various donor units in phenyl moieties10.1007/s11426-014-5284-7 ↗
9. Asymmetric diketopyrrolopyrrole conjugated polymers for field-effect transistors and polymer solar cells processed from a nonchlorinated solvent10.1002/adma.201504272 ↗
10. Synthesis, characterization and photovoltaic properties of two dimensional conjugated polybenzodithiophene derivatives appending diketopyrrolopyrrole units as side chain10.1016/j.polymer.2014.07.055 ↗
11. A novel benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymer with a pendant diketopyrrolopyrrole unit for high-performance solar cells10.1021/ma302243r ↗
12. Synthesis and photovoltaic properties of copolymers based on benzo[1,2- b:4,5-b′]dithiophene and thiophene with different conjugated side groups10.1021/ma202399n ↗
13. Synthesis and characterization of novel indacenodithiophene- based narrow band-gap polymers with pendant isoindigo units for polymer solar cells10.1016/j.eurpolymj.2016.06.013 ↗
14. Synthesis and photovoltaic properties of copolymers based on benzo [1,2-b:4,5-b′]dithiophene and thiazole with different conjugated side groups10.1039/c3py00614j ↗
15. Synthesis, characterization, and photovoltaic properties of carbazole-based two- dimensional conjugated polymers with donor-π-bridge-acceptor side chains10.1021/cm1027157 ↗
16. Synthesis and photovoltaic properties of two-dimensional benzodithiophene-thiophene copolymers with pendent rational naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole side chains10.1039/C5TA07205K ↗
17. Synthesis and photovoltaic properties of conjugated copolymers with benzo[1,2-b:4,5- b′]dithiophene and thiadiazolo[3,4-c]pyridine moieties10.1016/j.eurpolymj.2013.06.008 ↗
18. Synthesis and photovoltaic properties of the copolymers based on 3-ethylrhodanine side group10.1016/j.eurpolymj.2015.03.049 ↗
19. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
20. Molecular design strategies for voltage modulation in highly efficient polymer solar cells10.1002/pi.4895 ↗
21. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
22. Effect of π-conjugated bridges of TPD-based medium bandgap conjugated copolymers for efficient tandem organic photovoltaic cells10.1039/C4EE02318H ↗
23. High mobility diketoprrolopyrrole (DPP)-based organic semiconductor materials for organic thin film transistors and photovoltaics10.1039/c3ee00015j ↗
24. Diketopyrrolopyrrole (DPP)-based materials for organic photovoltaics10.1039/c2cc17886a ↗
25. Improving photovoltaic performance of the linear A-Ar-A-type small molecules with diketopyrropyrrole arms by tuning the linkage position of the anthracene core10.1021/acsami.5b03338 ↗
26. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗