journal article·2017-05

Two new medium bandgap asymmetric copolymers based on thieno[2,3-f]benzofuran for efficient organic solar cells

Lixia Qiu, Jun Yuan, Dingjun He, Zhi-Guo Zhang, Yongfang Li, Yingping Zou

Dyes and Pigments· Volume 140
Publisher page

Abstract

Abstract Two new medium bandgap, alkoxyphenyl substituted thieno[2,3- f ]benzofuran (TBFPO) and alkoxyl substituted thieno[2,3- f ]benzofuran (TBFP)-based polymers were designed, synthesized and applied in polymer solar cells (PSCs), namely, TBFPO-BDD and TBFO-BDD, respectively. Their thermal, optical, electronic properties and photovoltaic performances were systematically investigated. The PSCs prepared using o-dichlorobenzene as solvent, with the single layer device structure of ITO/PEDOT:PSS/TBFPO-BDD:PC 71 BM (1:1; w / w )/perylene diimide (PDI) derivative (PDINO)/Al, exhibited a promising power conversion efficiency (PCE) of 6.58% under the illumination of AM 1.5G, 100 mW/cm 2 , without any post-treatment. While the devices based on TBFO-BDD showed an enhanced PCE of 3.07% with 1 vol% 1,8-diodooctane (DIO) as additive. This study demonstrates that TBFPO-BDD is a promising polymer for organic electronics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
2. Efficient organic solar cells processed from hydrocarbon solvents10.1038/nenergy.2015.27 ↗
3. Highly efficient tandem polymer solar cells with a photovoltaic response in the visible light range10.1002/adma.201404525 ↗
4. Importance of the donor:fullerene intermolecular arrangement for high-efficiency organic photovoltaics10.1021/ja502985g ↗
5. Influences of the non-covalent interaction strength on reaching high solid-state order and device performance of a low bandgap polymer with axisymmetrical structural units10.1002/adma.201300098 ↗
6. Effect of fluorine content in thienothiophene-benzodithiophene copolymers on the morphology and performance of polymer solar cells10.1021/cm500953e ↗
7. Influence of the backbone conformation of conjugated polymers on morphology and photovoltaic properties10.1039/C3PY01231J ↗
8. Color control in π-conjugated organic polymers for use in electrochromic devices10.1021/cr900129a ↗
9. Roles of flexible chains in organic semiconducting materials10.1021/cm4018776 ↗
10. Side chain engineering in solution-processable conjugated polymers10.1021/cm4020805 ↗
11. Tuning the electronic properties of poly(thienothiophene vinylene)s via alkylsulfanyl and alkylsulfonyl substituents10.1021/ma402018n ↗
12. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole-based polymer solar cells10.1002/adma.201304360 ↗
13. Thiophene-thiazolothiazole copolymers: significant impact of side chain composition on backbone orientation and solar cell performances10.1002/adma.201303059 ↗
14. Photocurrent enhancement from diketopyrrolopyrrole polymer solar cells through alkyl-chain branching point manipulation10.1021/ja406934j ↗
15. Side-chain tunability of furan-containing low-band-gap polymers provides control of structural order in efficient solar cells10.1021/ja2089662 ↗
16. Optimization of side chains in alkylthiothiophene-substituted benzo[1,2-b:4,5-b′]dithiophene-based photovoltaic polymers10.1039/C5PY00071H ↗
17. New conjugated alternating benzodithiophene-containing copolymers with different acceptor units: synthesis and photovoltaic application10.1039/C3TA12967E ↗
18. Conjugated and nonconjugated substitution effect on photovoltaic properties of benzodifuran-based photovoltaic polymers10.1021/ma301254x ↗
19. Thieno[3,2-b]thiophene-substituted benzo[1,2-b:4,5-b′]dithiophene as a promising building block for low bandgap semiconducting polymers for high-performance single and tandem organic photovoltaic cells10.1021/cm4035903 ↗
20. Ring substituents mediate the morphology of pbdttpd-pcbm bulk-heterojunction solar cells10.1021/cm500172w ↗
21. Development of a new benzo(1,2-b:4,5-b')dithiophene-based copolymer with conjugated dithienylbenzothiadiazole-vinylene side chains for efficient solar cells10.1039/c1cc12851e ↗
22. Efficient polymer solar cells based on terpolymers with a broad absorption range of 300–900 nm10.1039/c4ta00020j ↗
23. Enhanced performance of white polymer light-emitting diodes using polymer blends as hole-transporting layers10.1063/1.2360248 ↗
24. Alkylthio-substituted polythiophene: absorption and photovoltaic properties10.1002/marc.200800785 ↗
25. High performance polymer solar cells based on a two dimensional conjugated polymer from alkylthienyl-substituted benzodifuran and benzothiadiazole10.1039/C4PY00392F ↗
26. New alkoxylphenyl substituted benzo[1,2-b:4,5-b′] dithiophene-based polymers: synthesis and application in solar cells10.1039/c3ta11968h ↗
27. Incorporation of fluorine onto different positions of phenyl substituted benzo[1,2-b:4,5-b′]dithiophene unit: influence on photovoltaic properties10.1021/acs.macromol.5b00564 ↗
28. Organic solar cells based on a 2D-benzo[1,2-b:4,5-b']difuran-conjugated polymer with high-power conversion efficiency10.1002/adma.201503023 ↗
29. A new two-dimensional donor/acceptor copolymer based on 4,8-bis(2′-ethylhexylthiophene)thieno[2,3-f]benzofuran for high-performance polymer solar cells10.1039/c4tc00738g ↗
30. Synthesis and photovoltaic properties of two new alkoxylphenyl substituted thieno[2,3-f]benzofuran based polymers10.1039/C5CP02127H ↗
31. Two new fluorinated copolymers based on thieno[2,3-f]benzofuran for efficient polymer solar cells10.1039/C6RA09791J ↗
32. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
33. Effect of fluorination and symmetry on the properties of polymeric photovoltaic materials based on an asymmetric building block10.1039/C6RA21407J ↗
34. An asymmetric small molecule based on thieno[2,3-f]benzofuran for efficient organic solar cells10.1016/j.orgel.2016.05.010 ↗
35. Synthesis, properties, and photovoltaic performances of donor–acceptor copolymers having dioxocycloalkene-annelated thiophenes as acceptor monomer units10.1021/ma300742r ↗
36. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
37. New alkylthio-thieno[3,2-b]thiophene-substituted benzodithiophene-based highly efficient photovoltaic polymer10.1039/C5TC00627A ↗
38. Systematic investigation of benzodithiophene- and diketopyrrolopyrrole-based low-bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
39. Design rules for donors in bulk-heterojunction tandem solar cells towards 15 % energy-conversion efficiency10.1002/adma.200702337 ↗
40. Electric-field and temperature dependence of the hole mobility in poly (p-phenylene vinylene)10.1103/PhysRevB.55.R656 ↗
41. Electrical characteristics and efficiency of single-layer organic light-emitting diodes10.1103/PhysRevB.58.R13411 ↗
42. All-polymer solar cells from perylene diimide based copolymers: material design and phase separation control10.1002/anie.201005408 ↗
43. Control of miscibility and aggregation via the material design and coating process for high-performance polymer blend solar cells10.1002/adma.201303170 ↗
44. All-polymer solar cell with high near-infrared response based on a naphthodithiophene diimide (ndti) copolymer10.1021/mz5004272 ↗
45. Achievement of high Voc of 1.02 V for P3HT-based organic solar cell using a benzotriazole-containing non-fullerene acceptor10.1002/aenm.201602269 ↗
46. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
47. Competition between recombination and extraction of free charges determines the fill factor of organic solar cells10.1038/ncomms8083 ↗