The effect of halogenation on PBDTT-TQxT based non-fullerene polymer solar cells – Chlorination vs fluorination
Source abstract
Abstract
The rapid advancement in the development of non-fullerene acceptors has led to single-junction polymer solar cells with efficiencies over 18%. Even with these novel acceptor materials, the choice of the donor polymer remains important. Tuning of the donor and acceptor compatibility in terms of absorption, frontier orbital energy levels, mixing enthalpy and charge carrier mobility is routinely performed by side chain variation. Fluorination presents an additional powerful approach to optimize these parameters. Although significantly less studied, chlorination can give rise to similar effects, while donor-acceptor phase separation due to fluorophobic interactions is less of an issue. Moreover, from a material synthesis point of view, the introduction of chlorine groups is in many cases much more straightforward. In this work, we present a series of push-pull type benzo[1,2-b:4,5-b']dithiophene-alt-quinoxaline donor polymers and compare the behavior of the non-halogenated, fluorinated and chlorinated derivatives in polymer solar cells when combined with small molecule and polymer type non-fullerene acceptors. The solar cell efficiencies vary from 2.4 to 8.4%, elucidating the large impact of these small structural variations. Best results are achieved for the chlorinated donor polymer, affording a high open-circuit voltage, balanced charge carrier mobilities and favorable donor-acceptor interactions. Combined with the easier synthesis of chlorinated materials, this suggests that more emphasis should be put on chlorination as a valuable approach to tune the properties of organic semiconductors for solar cell blends (and other optoelectronic applications).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%10.1007/s11426-019-9669-3 ↗
2. Optimisation of processing solvent and molecular weight for the production of green-solvent-processed all-polymer solar cells with a power conversion efficiency over 9%10.1039/C7EE00619E ↗
3. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
4. Impact of the photo-induced degradation of electron acceptors on the photophysics, charge transport and device performance of all-polymer and fullerene–polymer solar cells10.1039/C7TA07535A ↗
5. Comparative study of thermal stability, morphology, and performance of all-polymer, fullerene–polymer, and ternary blend solar cells based on the same polymer donor10.1021/acs.macromol.7b00834 ↗
6. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
7. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
8. A generic green solvent concept boosting the power conversion efficiency of all-polymer solar cells to 11%10.1039/C8EE02863J ↗
9. Efficient all-polymer solar cells based on a new polymer acceptor achieving 10.3% power conversion efficiency10.1021/acsenergylett.8b02114 ↗
10. Life cycle analyses of organic photovoltaics: a review10.1039/c3ee42653j ↗
11. Toward bulk heterojunction polymer solar cells with thermally stable active layer morphology10.1117/1.JPE.4.040997 ↗
12. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
13. Roll-coated fabrication of fullerene-free organic solar cells with improved stability10.1002/advs.201500096 ↗
14. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
15. 11.2% Efficiency all-polymer solar cells with high open-circuit voltage10.1007/s11426-019-9466-6 ↗
16. Aggregation-induced multilength scaled morphology enabling 11.76% efficiency in all-polymer solar cells using printing fabrication10.1002/adma.201902899 ↗
17. Morphology optimization via molecular weight tuning of donor polymer enables all-polymer solar cells with simultaneously improved performance and stability10.1016/j.nanoen.2019.103931 ↗
18. Thermally stable All-polymer solar cells with high tolerance on blend ratios10.1002/aenm.201800029 ↗
19. Flexible, highly efficient all-polymer solar cells10.1038/ncomms9547 ↗
20. Molecular design of benzodithiophene-based organic photovoltaic materials10.1021/acs.chemrev.6b00176 ↗
21. Recent advances in high performance donor-acceptor polymers for organic photovoltaics10.1016/j.progpolymsci.2017.03.003 ↗
22. Importance of 2D conjugated side chains of benzodithiophene-based polymers in controlling polymer packing, interfacial ordering, and composition variations of all-polymer solar cells10.1021/acs.chemmater.7b03495 ↗
23. Alkylthienyl substituted asymmetric 2D BDT and DTBT-based polymer solar cells with a power conversion efficiency of 9.2%10.1039/C7TA10247J ↗
24. Quinoxaline-Containing nonfullerene small-molecule acceptors with a linear A2-A1-D-A1-A2 skeleton for poly(3-hexylthiophene)-based organic solar cells10.1021/acsami.8b00216 ↗
25. Introducing fluorine and sulfur atoms into quinoxaline-based p-type polymers to gradually improve the performance of fullerene-free organic solar cells10.1021/acsmacrolett.9b00368 ↗
26. Side chain engineering of quinoxaline-based small molecular nonfullerene acceptors for high-performance poly(3-hexylthiophene)-based organic solar cells10.1007/s11426-019-9618-7 ↗
27. Recent development of quinoxaline based polymers/small molecules for organic photovoltaics10.1002/aenm.201700575 ↗
28. Simultaneous enhancement of solar cell efficiency and stability by reducing the side chain density on fluorinated PCPDTQx copolymers10.1021/acs.macromol.5b00035 ↗
29. Fluorinated conjugated polymers in organic bulk heterojunction photovoltaic solar cells10.1016/j.progpolymsci.2015.04.007 ↗
30. Impact of backbone fluorination on π-conjugated polymers in organic photovoltaic devices: a review10.3390/polym8010011 ↗
31. Face-on orientation of fluorinated polymers conveyed by long alkyl chains: a prerequisite for high photovoltaic performances10.1039/C8TA04127J ↗
32. Fluorination as an effective tool to increase the open-circuit voltage and charge carrier mobility of organic solar cells based on poly(cyclopenta[2,1-b:3,4-b′]dithiophene-alt-quinoxaline) copolymers10.1039/C4TA06054G ↗
33. Fluoro-substituted n-type conjugated polymers for additive-free all-polymer bulk heterojunction solar cells with high power conversion efficiency of 6.7110.1002/adma.201501214 ↗
34. Chlorinated wide bandgap donor polymer enabling annealing free non-fullerene solar cells with the efficiency of 11.510.1021/acs.jpclett.8b03247 ↗
35. Over 14% efficiency in polymer solar cells enabled by a chlorinated polymer donor10.1002/adma.201800868 ↗
36. Chlorine effects of heterocyclic ring‐based donor polymer for low‐cost and high‐performance nonfullerene polymer solar cells10.1002/solr.201970071 ↗
37. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
38. Highly selective Palladium-catalyzed Suzuki coupling reaction toward chlorine-containing electroluminescence polymers10.1016/j.dyepig.2015.03.031 ↗
39. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
40. Highly efficient photovoltaic polymers based on benzodithiophene and quinoxaline with deeper HOMO levels10.1021/acs.macromol.5b00829 ↗
41. Fluorinated and non-fluorinated conjugated polymers showing different photovoltaic properties in polymer solar cells with PFNBr interlayers10.1016/j.orgel.2015.11.001 ↗
42. Efficient charge transfer and fine-tuned energy level alignment in a THF-processed fullerene-free organic solar cell with 11.3% efficiency10.1002/adma.201604241 ↗
43. Optimizing the conjugated side chains of quinoxaline based polymers for nonfullerene solar cells with 10.5% efficiency10.1039/C7TA10262C ↗
44. Hexafluoroquinoxaline based polymer for nonfullerene solar cells reaching 9.4% efficiency10.1021/acsami.7b03947 ↗
45. Achieving over 10% efficiency in a new acceptor ITTC and its blends with hexafluoroquinoxaline based polymers10.1039/C7TA02486J ↗
46. High-efficiency all polymer solar cell with a low voltage loss of 0.56 V10.1021/acsaem.8b00453 ↗
47. Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages10.1038/s41467-019-10351-5 ↗
48. A near-infrared absorption small molecule acceptor for high-performance semitransparent and colorful binary and ternary organic photovoltaics10.1002/cssc.201903087 ↗
49. Effects of halogenation in B ← N embedded polymer acceptors on performance of all-polymer solar cells10.1021/acsami.9b20214 ↗
50. Reduced energy loss enabled by a chlorinated thiophene‐fused ending‐group small molecular acceptor for efficient nonfullerene organic solar cells with 13.6% efficiency10.1002/aenm.201900041 ↗
51. Naphthalene diimide-based polymeric semiconductors. Effect of chlorine incorporation and n-channel transistors operating in water10.1557/mrc.2016.4 ↗
52. Recent progress in molecular design of fused ring electron acceptors for organic solar cells10.1002/smll.201900134 ↗
53. The impact of fluorination on both donor polymer and non-fullerene acceptor: the more fluorine, the merrier10.1007/s12274-019-2362-3 ↗
54. Side chain engineering on medium bandgap copolymers to suppress triplet formation for high-efficiency polymer solar cells10.1002/adma.201703344 ↗
55. Synthesis and characterization of fluorine atom substituted new BDT-based polymers for use in organic solar cells10.1016/j.synthmet.2015.10.013 ↗
56. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
57. A polybenzo[1,2-b:4,5-b']dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
58. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
59. Regioirregular ambipolar naphthalenediimide-based alternating polymers: synthesis, characterization, and application in field-effect transistors10.1002/pola.28747 ↗
60. Phthalimide-based π-conjugated small molecules with tailored electronic energy levels for use as acceptors in organic solar cells10.1039/C5TC01877C ↗
61. High-performance fluorine-containing BDT-based copolymer for organic solar cells with a high open circuit voltage10.1002/pola.28643 ↗
62. “All that glisters is not gold”: an analysis of the synthetic complexity of efficient polymer donors for polymer solar cells10.1021/ma501894w ↗
63. Elucidating batch-to-batch variation caused by homocoupled side products in solution-processable organic solar cells10.1021/acs.chemmater.6b04143 ↗
64. On the “true” structure of push-pull-type low-bandgap polymers for organic electronics10.1002/aelm.201700481 ↗
65. High-performance all-polymer solar cells based on fluorinated naphthalene diimide acceptor polymers with fine-tuned crystallinity and enhanced dielectric constants10.1016/j.nanoen.2018.01.012 ↗
66. Frisch · 2016
67. Zhao · Theor Chem Acc · 2008 · 120 · 21510.1007/s00214-007-0310-x ↗
68. Aggregation in a high-mobility n-type low-bandgap copolymer with implications on semicrystalline morphology10.1021/ja306844f ↗
69. On the origin of the open-circuit voltage of polymer-fullerene solar cells10.1038/nmat2548 ↗