journal article·2019-01

Alkyl side-chain and fluorination engineering in the indeno[1,2-b]fluorene-based small-molecule acceptors for efficient non-fullerene organic solar cells

Zhijing Lin, Kunxiang Huang, Zhaolong Wang, Xianjie Chen, Jing Sun, Zheng Xu, Tian He, Shouchun Yin, Miaomiao Li, Qian Zhang, Huayu Qiu

Dyes and Pigments· Volume 160
Publisher page

Abstract

Abstract A series of non-fullerene acceptors based on the indeno[1,2-b]fluorene central moiety, with thiophene or 3-octylthiophene as π-bridge and either non-fluorinated or fluorinated 2-(3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile as end-capping groups (namely ICBF-O, ICBF, FICBF-O and FICBF), have been designed and synthesized. The effect of alkylation of the π-bridge and fluorination of the end-capping groups on the absorption spectra, energy levels, active layer morphology and photovoltaic performance were systematically investigated. Alkylation upshifts the molecular LUMO levels and thereby a high open circuit voltage (Voc) of 1.06 V was obtained. However, the larger band gap induced by alkylation led to lower short circuit current (Jsc). Fluorinated acceptors display lower Voc but higher Jsc and FF compared with non-fluorinated acceptors, coinciding with their lower LUMO levels, narrower band gaps and favourable morphology. As a result, the non-fullerene solar cells (NFSCs) based on FICBF showed the highest PCE of 7.41% among these four acceptors. The ICBF based device delivered a comparatively high Voc of 0.99 V and a PCE of 6.07%. The results demonstrated that indeno[1,2-b]fluorene is a promising building block for efficient NFSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Fullerene Chemistry and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Outlook brightens for plastic solar cells10.1126/science.332.6027.293 ↗
2. Fluorination-enabled optimal morphology leads to over 11% efficiency for inverted small-molecule organic solar cells10.1038/ncomms13740 ↗
3. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
4. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
5. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
6. Recent advances in nonfullerene acceptors for organic solar cells10.1002/marc.201700555 ↗
7. Recent progress on non-fullerene small molecule acceptors in organic solar cells (OSCs)10.1039/C6TC05066B ↗
8. Critical review of the molecular design progress in non-fullerene electron acceptors towards commercially viable organic solar cells
9. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
10. Nonfullerene acceptor molecules for bulk heterojunction organic solar cells10.1021/acs.chemrev.7b00535 ↗
11. PDI derivative through fine-tuning the molecular structure for fullerene-free organic solar cells10.1021/acsami.7b08282 ↗
12. A perylene diimide (PDI)-based small molecule with tetrahedral configuration as a non-fullerene acceptor for organic solar cells10.1039/C5TC00865D ↗
13. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
14. Ternary nonfullerene polymer solar cells with efficiency >13.7% by integrating the advantages of materials and two binary cells10.1039/C8EE01107A ↗
15. A Wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
16. Dithieno[3,2‐b:2′,3′‐d]pyrrol fused nonfullerene acceptors enabling over 13% efficiency for organic solar cells10.1002/adma.201707150 ↗
17. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
18. Energy-level modulation of non-fullerene acceptors to achieve high-efficiency polymer solar cells at a diminished energy offset10.1039/C7TA01554B ↗
19. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
20. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
21. Dithienosilole-based non-fullerene acceptors for efficient organic photovoltaics10.1039/C7TA10957A ↗
22. Design, synthesis, and structural characterization of the first dithienocyclopentacarbazole-based n-type organic semiconductor and its application in non-fullerene polymer solar cells10.1039/C7TA01143A ↗
23. Thieno[3,2-b]pyrrolo fused pentacyclic benzotriazole based acceptor for efficient organic photovoltaics10.1021/acsami.7b10995 ↗
24. Near-infrared absorbing non-fullerene acceptors with selenophene as pi bridge for efficient organic solar cells10.1039/C8TA00783G ↗
25. Non-fullerene polymer solar cells based on a selenophene-containing fused-ring acceptor with photovoltaic performance of 8.6%10.1039/C6EE00315J ↗
26. Efficient nonfullerene polymer solar cells enabled by a novel wide bandgap small molecular acceptor10.1002/adma.201606054 ↗
27. Generating a three-dimensional non-fullerene electron acceptor by combining inexpensive spiro[fluorene-9,9’-xanthene] and cyanopyridone functionalities10.1039/C8QM00067K ↗
28. High-Efficiency non-fullerene organic solar cells enabled by a difluorobenzothiadizole-based donor polymer combined with a properly matched small molecule acceptor10.1039/C4EE02990A ↗
29. A simple small molecule as an acceptor for fullerene-free organic solar cells with efficiency near 8%10.1039/C6TA04358E ↗
30. A new nonfullerene electron acceptor with a ladder type backbone for high-performance organic solar cells10.1002/adma.201604964 ↗
31. A Nonfullerene small molecule acceptor with 3D interlocking geometry enabling efficient organic solar cells10.1002/adma.201504010 ↗
32. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
33. A large-bandgap small-molecule electron acceptor utilizing a new indacenodibenzothiophene core for organic solar cells10.1039/C7QM00403F ↗
34. Molecular engineering of highly efficient small molecule nonfullerene acceptor for organic solar cells10.1002/adfm.201603820 ↗
35. A fluorene-core-based electron acceptor for fullerene-free BHJ organic solar cells-towards power conversion efficiencies over 10%10.1039/C7CC08440D ↗
36. Ladder-type oligo-p-phenylene-containing copolymers with high open-circuit voltages and ambient photovoltaic activity10.1021/ja909111p ↗
37. Alternating narrow band gap copolymers derived from indeno[1,2‐b]fluorene and thiophene‐cored‐thieno[3,4‐b]pyrazine derivatives-Synthesis, characterization and comparative studies of photochemical stability10.1002/pola.24735 ↗
38. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
39. Side-Chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
40. Energy level modulation of non-fullerene acceptors enables efficient organic solar cells with small energy loss10.1039/C7TA10763C ↗
41. Subtle side-chain tuning on terminal groups of small molecule electron acceptors for efficient fullerene-free polymer solar cells10.1039/C7TA04431C ↗
42. Design and synthesis of a low bandgap small molecule acceptor for efficient polymer solar cells10.1002/adma.201602642 ↗
43. Enhancing performance of non-fullerene organic solar cells via side chain engineering of fused-ring electron acceptors10.1016/j.dyepig.2016.12.065 ↗
44. Exploiting noncovalently conformational locking as a design strategy for high performance fused-ring electron acceptor used in polymer solar cells10.1021/jacs.7b00566 ↗
45. Non-fullerene organic small molecule electron-acceptors10.6023/cjoc201311041 ↗