Synthesis and photovoltaic properties of the acceptor pended push–pull conjugated polymers incorporating thieno[3,2–b] thiophene in the backbone chain or side chains
Source abstract
Abstract
Abstract Two novel acceptor pended push–pull conjugated polymers PTT–DTBT and PT–DTTBT ,incorporating thieno[3,2– b ] thiophene in the backbone chain and conjugated side chains respectively, were designed and synthesized. The effects of the location of thieno[3,2– b ]thiophene units on the thermal, photophysical, electrochemical and photovoltaic properties of the polymers were investigated. Compared to the polymer PTT–DTBT , the polymer PT–DTTBT with thieno[3,2– b ]thiophene units in the side chains shows more broadened and red–shifted absorption, smaller band gap and higher hole mobility. Bulk heterojunction solar cells with the polymers as electron donors and (6,6)–phenyl–C 61 –butyric acidmethyl ester as the electron acceptor were fabricated, and the PT–DTTBT –based device exhibits a higher power conversion efficiency of 4.07% than that of the PTT–DTBT –based device (3.05%) without any processing additives or posttreatments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Molecular design toward highly efficient photovoltaic polymers based on two–dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
2. Importance of the donor:fullerene intermolecular arrangement for high–efficiency organic photovoltaics10.1021/ja502985g ↗
3. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
4. Aggregation and morphology control enables multiple cases of high–efficiency polymer solar cells10.1038/ncomms6293 ↗
5. Mobility guidelines for high fill factor solution–processed small molecule solar cells10.1002/adma.201401725 ↗
6. Design rules for donors in bulk–heterojunction solar cells—towards 10 % energy–conversion efficiency10.1002/adma.200501717 ↗
7. Chemically doped and cross–linked hole–transporting materials as an efficient anode buffer layer for polymer solar cells10.1021/cm2024235 ↗
8. Enhanced power–conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
9. Homocoupling defects in diketopyrrolopyrrole–based copolymers and their effect on photovoltaic performance10.1021/ja505574a ↗
10. Fluorinated benzothiadiazole–based conjugated polymers for high–performance polymer solar cells without any processing additives or post–treatments10.1021/ja409881g ↗
11. Single–junction polymer solar cells exceeding 10% power conversion efficiency10.1002/adma.201404535 ↗
12. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT–C–T/PC71 BM10.1002/adma.201400411 ↗
13. Eleven–membered fused–ring low band–gap polymer with enhanced charge carrier mobility and photovoltaic performance10.1002/adfm.201303953 ↗
14. Improved charge transport and absorption coefficient in indacenodithieno[3,2–b]thiophene–based ladder–type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
15. High performance polymer solar cells based on a two dimensional conjugated polymer from alkylthienyl–substituted benzodifuran and benzothiadiazole10.1039/C4PY00392F ↗
16. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
17. 10.2% power conversion efficiency polymer tandem solar cells consisting of two identical sub–cells10.1002/adma.201300964 ↗
18. Highly efficient solar cell polymers developed via fine–tuning of structural and electronic properties10.1021/ja901545q ↗
19. Understanding low bandgap polymer PTB7 and optimizing polymer solar cells based on it10.1002/adma.201400384 ↗
20. Systematic investigation of benzodithiophene– and diketopyrrolopyrrole–based low–bandgap polymers designed for single junction and tandem polymer solar cells10.1021/ja301460s ↗
21. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency10.1002/anie.201005451 ↗
22. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%10.1002/adma.201301494 ↗
23. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
24. An easy and effective method to modulate molecular energy level of the polymer based on benzodithiophene for the application in polymer solar cells10.1002/adma.201304631 ↗
25. Synthesis and photovoltaic properties of copolymers based on benzo[1,2–b:4,5–b′]dithiophene and thiophene with different conjugated side groups10.1021/ma202399n ↗
26. Synthesis and photovoltaic performances of conjugated copolymers with 4,7–dithien–5–yl–2,1,3–benzothiadiazole and di(p–tolyl)phenylamine side groups10.1039/c2jm33886f ↗
27. Synthesis and photovoltaic properties of conjugated copolymers with benzo[1,2–b:4,5–b′]dithiophene and thiadiazolo[3,4–c]pyridine moieties10.1016/j.eurpolymj.2013.06.008 ↗
28. Enhancing photovoltaic performance of copolymers containing thiophene unit with D–A conjugated side chain by rational molecular design10.1021/ma401886a ↗
29. Synthesis and photovoltaic properties of conjugated polymers with an asymmetric 4–(2–ethylhexyloxy)–8–(2–ethylhexylthio)benzo[1,2– b:4,5–b']dithiophene unit10.1016/j.dyepig.2014.12.012 ↗
30. Effects of fluorination on the properties of thieno[3,2–b]thiophene–bridged donor–π–acceptor polymer semiconductors10.1039/C3PY00940H ↗
31. Improved photovoltaic performance of two–dimensional low band–gap conjugated polymers with thieno[3,2–b]thiophene and diketopyrrolopyrrole units by altering pendent position of conjugated side chain10.1016/j.dyepig.2014.04.041 ↗
32. Liquid–crystalline semiconducting polymers with high charge–carrier mobility10.1038/nmat1612 ↗
33. Thieno[3,2–b]thiophene–diketopyrrolopyrrole–containing polymers for high–performance organic field– effect transistors and organic photovoltaic devices10.1021/ja110619k ↗
34. Alkyl–substituted thieno[3,2–b]thiophene polymers and their dimeric subunits10.1021/ma049107n ↗
35. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
36. Side–chain engineering of high–efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
37. Electrochemical properties of luminescent polymers and polymer light–emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
38. Charge–transfer and energy–transfer processes in π–conjugated oligomers and polymers: a molecular picture10.1021/cr040084k ↗
39. Electrical characteristics and efficiency of single–layer organic light–emitting diodes10.1103/PhysRevB.58.R13411 ↗
40. Mobility and fill factor correlation in geminate recombination limited solar cells10.1063/1.3609079 ↗