journal article·2019-11

Correlating crystallinity to photovoltaic performance in single-component organic solar cells via conjugated backbone engineering

Shijie Liang, Yunhua Xu, Xudong Jiang, Cheng Li, Weiwei Li

Dyes and Pigments· Volume 170
Publisher page

Abstract

Abstract Single-component organic solar cells (SCOSCs) show high stability and simplified fabrication process compared to two-component bulk-heterojunction solar cells, but their photovoltaic performance is far to be optimized. The control of nanophase separation in single-component conjugated materials is one important factor to realize high performance. In this work, we design three double-cable conjugated polymers with distinct backbones, and we showed how the crystallinity of conjugated backbones controlled the nanophase separation in the polymers. The polymers contain diketopyrrolopyrrole-based conjugated backbone and perylene bisimide side units, in which the copolymerized units were varied from one thiophene to two and three thiophenes. With the structural variations, we found that, the more thiophenes on the backbone, the better crystallinity of double-cables can be obtained, resulting in better charge transport. As consequence, the power conversion efficiencies can be varied from 0.59% to 2.12%. Our results reveal that by controlling the crystallinity of conjugated backbone, the nanophase separation of double-cable polymers can be improved, and hence high PCEs will be obtained in SCOSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The dawn of single material organic solar cells10.1002/advs.201801026 ↗
2. Double-cable conjugated polymers and their application in single-component organic solar cells
3. Crystalline conjugated polymers for organic solar cells: from donor, acceptor to single-component10.1002/tcr.201800131 ↗
4. Advances toward the effective use of block copolymers as organic photovoltaic active layers10.1039/C7PY01878A ↗
5. Challenges and opportunities in the development of conjugated block copolymers for photovoltaics10.1021/acs.macromol.5b00112 ↗
6. 25th anniversary article: No assembly required: recent advances in fully conjugated block copolymers10.1002/adma.201302677 ↗
7. Top-down meets bottom-up: organized donor–acceptor heterojunctions for organic solar cells10.1039/c2jm33756h ↗
8. Donor–acceptor block copolymers for photovoltaic applications10.1039/c0jm00665c ↗
9. Linear [small pi]-conjugated systems derivatized with C60-fullerene as molecular heterojunctions for organic photovoltaics10.1039/b415941c ↗
10. Single-material organic solar cells based on electrospun fullerene-grafted polythiophene nanofibers10.1021/acs.macromol.7b00857 ↗
11. “Double-Cable” conjugated polymers with linear backbone toward high quantum efficiencies in single-component polymer solar cells10.1021/jacs.7b10499 ↗
12. High-performance polymer solar cell with single active material of fully conjugated block copolymer composed of wide-band gap donor and narrow-band gap acceptor blocks10.1021/acsami.8b03580 ↗
13. Single-Junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
14. Achieving over 16% efficiency for single-junction organic solar cells
15. Achieving over 15% efficiency in organic photovoltaic cells via copolymer design10.1002/adma.201808356 ↗
16. 25th anniversary article: rise to power – OPV-based solar parks10.1002/adma.201302031 ↗
17. Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing10.1038/ncomms14541 ↗
18. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
19. Stability of polymer solar cells10.1002/adma.201104187 ↗
20. Single component organic solar cells based on oligothiophene-fullerene conjugate10.1002/adfm.201702474 ↗
21. Evidencing excellent thermal- and photostability for single-component organic solar cells with inherently built-in microstructure10.1002/aenm.201900409 ↗
22. The first “charm bracelet” conjugated polymer: an electroconducting polythiophene with covalently bound fullerene moieties10.1002/anie.199606481 ↗
23. A novel polythiophene with pendant fullerenes: toward donor/acceptor double-cable polymers10.1039/b008072l ↗
24. Photoinduced electron transfer and photovoltaic devices of a conjugated polymer with pendant fullerenes10.1021/ja015614y ↗
25. Soluble polythiophenes with pendant fullerene groups as double cable materials for photodiodes10.1002/1521-4095(200112)13:24<1871::AID-ADMA1871>3.0.CO;2-3 ↗
26. Synthesis and photovoltaic properties of a Donor−Acceptor double-cable polythiophene with high content of C60 pendant10.1021/ma070052+ ↗
27. Controlled synthesis of fullerene-attached poly(3-alkylthiophene)-based copolymers for rational morphological design in polymer photovoltaic devices10.1021/ma300376m ↗
28. Diketopyrrolopyrrole-based conjugated polymers with perylene bisimide side chains for single-component organic solar cells10.1021/acs.chemmater.7b02534 ↗
29. Multifunctional diketopyrrolopyrrole-based conjugated polymers with perylene bisimide side chains10.1002/marc.201700611 ↗
30. A new strategy for designing polymer electron acceptors: electronrich conjugated backbone with electron-deficient side units10.1007/s11426-018-9241-0 ↗
31. An isoindigo-based “Double-Cable” conjugated polymer for single- component polymer solar cells10.1002/cjoc.201800009 ↗
32. Monodisperse Co-oligomer approach toward nanostructured films with alternating donor-acceptor lamellae10.1021/ja905980w ↗
33. Introduction of a conjugated side chain as an effective approach to improving donor–acceptor photovoltaic polymers10.1039/c2ee23383e ↗
34. Design of diketopyrrolopyrrole (DPP)-Based small molecules for organic-solar-cell applications10.1002/adma.201600013 ↗
35. Conjugated materials containing dithieno[3,2-b:2′,3′-d]pyrrole and its derivatives for organic and hybrid solar cell applications10.1039/C8TA09383K ↗
36. A diketopyrrolopyrrole-based low bandgap polymer with enhanced photovoltaic performances through backbone twisting10.1039/C6TA08130D ↗
37. Hybrid corannulene–perylene dyes: facile synthesis and optoelectronic properties10.1002/asia.201600490 ↗
38. Effect of alkyl side chains of conjugated polymer donors on the device performance of non-fullerene solar cells10.1021/acs.macromol.6b01326 ↗
39. Polymer solar cells: solubility controls fiber network formation10.1021/jacs.5b07228 ↗
40. Relating open-circuit voltage losses to the active layer morphology and contact selectivity in organic solar cells10.1039/C8TA01195H ↗
41. Performance limitations in thieno[3,4-c]pyrrole-4,6-dione-based polymer:ITIC solar cells10.1039/C7CP04780K ↗
42. Improving electron transport in a double-cable conjugated polymer via parallel perylenetriimide design
43. Diketopyrrolopyrrole-based conjugated materials for non-fullerene organic solar cells10.1039/C9TA01976F ↗