Fabrication of stable perovskite-based near-infrared light emitting devices for noninvasive bioimaging applications
Source abstract
Abstract
Perovskite light-emitting diodes (PeLEDs) with their increasingly higher external quantum efficiencies (EQEs) have attracted continuous attention from the academic field. Perovskite near-infrared light-emitting diodes (PeNIRLEDs) have shown great potential for bioimaging, particularly in imaging and diagnosing blood arteries due to their superior advantage of higher depth penetration and lower scattering compared with visible light. But its stability always affects its performance. In the present study, we prepared FAPbI 3 Perovskite doped with varying amounts of 5-Aminovaleric acid (5-AVA: 1-6 mg). We found that the doping of 5-AVA in FAPbI 3 Perovskite significantly impact its structural and optical properties, resulting in improvement in stability, PL and EQE. Our manufactured device exhibits and output photoluminescence emission peak at 850 nm with full width half maximum (FWHM) of 64 nm. A maximum radiance of 108 W sr −1 m −2 with low turn-on voltage of 1.7 V and high EQE of 9.5% were obtained, so our fabricated device is well qualified for in vivo applications such as subcutaneous deep vein imaging, blood flow visualization, tumor illumination, telecommunications, night vision cameras and environmental monitoring.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Luminescence Properties of Advanced Materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Metal halide perovskite for next-generation optoelectronics: progresses and prospects10.1186/s43593-022-00033-z ↗
2. Metal halide perovskite nanostructures for optoelectronic applications and the study of physical properties10.1038/s41578-019-0080-9 ↗
3. Layered hybrid formamidinium lead iodide perovskites: challenges and opportunities10.1021/acs.accounts.0c00879 ↗
4. A review on theoretical studies of structural and optoelectronic properties of FA‐based perovskite materials with a focus on FAPbI310.1002/er.8008 ↗
5. Size-dependent lattice structure and confinement properties in CsPbI3 perovskite nanocrystals: negative surface energy for stabilization10.1021/acsenergylett.9b02395 ↗
6. Guanidium iodide treatment of size-controlled CsPbI3 quantum dots for stable crystal phase and highly efficient red LEDs10.1016/j.cej.2023.144578 ↗
7. Quantum dot–induced phase stabilization of α-CsPbI3 perovskite for high-efficiency photovoltaics10.1126/science.aag2700 ↗
8. Nanocrystals of cesium lead halide perovskites (CsPbX3, X= Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut10.1021/nl5048779 ↗
9. Controlling the nucleation and growth kinetics of lead halide perovskite quantum dots10.1126/science.abq3616 ↗
10. Ligand-engineered bandgap stability in mixed-halide perovskite LEDs10.1038/s41586-021-03217-8 ↗
11. Ultra-bright, efficient and stable perovskite light-emitting diodes10.1038/s41586-022-05304-w ↗
12. Designer phospholipid capping ligands for soft metal halide nanocrystals10.1038/s41586-023-06932-6 ↗
13. Abe, H., et al., Boosting the stability of FAPbI3 perovskite nanocrystal near-infrared light‐emitting diodes with aromatic ligands and organic host dispersion. Small: p. 2501159.
14. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
15. Efficient light-emitting diodes based on nanocrystalline perovskite in a dielectric polymer matrix10.1021/acs.nanolett.5b00235 ↗
16. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes10.1002/adma.201405217 ↗
17. Highly efficient large-area quantum dot near-infrared light-emitting device for advanced non-invasive bioimaging10.1016/j.nanoen.2025.111316 ↗
18. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
19. Opportunities and challenges in perovskite light-emitting devices10.1021/acsphotonics.8b00745 ↗
20. Boosting the stability of FAPbI3 perovskite nanocrystal near-infrared light‐emitting diodes with aromatic ligands and organic host dispersion10.1002/smll.202501159 ↗
21. Improving the efficiency of near-IR perovskite LEDs via surface passivation and ultrathin interfacial layers
22. Achieving order in disorder: stabilizing red light-emitting α-Phase formamidinium lead iodide10.3390/nano13233049 ↗
23. Enhanced α-phase stability of formamidinium lead iodide with addition of 5-ammonium valeric acid chloride10.1039/D4YA00527A ↗
24. Enhancing stability and photovoltaic performance of perovskite solar cells via 5‐Ammonium acid additive10.1002/adfm.202402056 ↗
25. Amino acids for perovskite light‐emitting diodes: conformations, mechanisms, and applications10.1002/adom.202401920 ↗
26. Jackson · 2007
27. Solubility of hybrid halide perovskites in DMF and DMSO10.3390/molecules26247541 ↗
28. Stable and high performance all-inorganic perovskite light-emitting diodes with anti-solvent treatment10.3788/COL202119.030005 ↗
29. Large-area near-infrared perovskite light-emitting diodes10.1038/s41566-019-0559-3 ↗