journal article·2021-02Open access

Nonfullerene acceptors from thieno[3,2-b]thiophene-fused naphthalene donor core with six-member-ring connection for efficient organic solar cells

Siying Du, Nannan Yao, Shungang Liu, Yongzhuo Xu, Jiamin Cao, Wenliu Zhuang, Junting Yu, Nong Wang, Donghong Yu, Fengling Zhang, Ergang Wang

Dyes and Pigments· Volume 185

Abstract

Comprehensive design ideas on the fused-ring donor-core in state-of-the-art acceptor-donor-acceptor (A-D-A) nonfullerene acceptors (NFAs) are still of great importance for regulating the electron push-pull effect for the sake of optimal light-harvesting, frontier molecular orbital levels, and finally their photovoltaic properties. Herein, thieno[3,2-b]thiophenes were fused in bay-area of naphthalene via six-member-ring connection, resulting in the formation of dihydropyrenobisthieno[3,2-b]thiophene based octacyclic ladder-type donor core, which was flanked by two 1,1-dicyanomethylene-3-indanone (IC) acceptor motifs with and without 5,6-diflourination, namely PTT-IC and PTT-2FIC, respectively, as novel efficient A-D-A fused-ring electron acceptors (FREAs). Compared with PTT-IC, fluorinated PTT-2FIC possesses narrower optical bandgap of 1.48 eV, better π-π stacking, and its PBDB-T:PTT-2FIC blend film exhibited better morphology, and better hole and electron mobility. As a result, nonfullerene solar cells using PBDB-T:PTT-2FIC as the active layer achieved a decent PCE of 10.40%, with an open-circuit voltage (VOC) of 0.87 V, a fill factor (FF) of 0.65, and a much higher short-circuit current (JSC) of 18.26 mA/cm2. Meanwhile, the PBDB-T:PTT-IC cells delivered a lower JSC of 12.58 mA/cm2 but a higher VOC of 0.99 V, thus resulting in a PCE of 7.39% due to its wider optical bandgap of 1.58 eV and higher LUMO energy level. These results demonstrated that NFAs based on fused-ring donor core from fusing thieno[3,2-b]thiophenes with naphthalene via six-member-ring connection are promising for organic photovoltaic applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
2. Fullerene derivatives for the applications as acceptor and cathode buffer layer materials for organic and perovskite solar cells10.1002/aenm.201601251 ↗
3. Development of isomer-free fullerene bisadducts for efficient polymer solar cells10.1039/C6EE01026A ↗
4. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
5. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
6. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
7. High-performance fullerene-free polymer solar cells with 6.31% efficiency10.1039/C4EE03424D ↗
8. Carbon-oxygen-bridged ladder-type building blocks for highly efficient nonfullerene acceptors10.1002/adma.201804790 ↗
9. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
10. All-small-molecule organic solar cells with over 14% efficiency by optimizing hierarchical morphologies10.1038/s41467-019-13292-1 ↗
11. Reduced energy loss enabled by a chlorinated thiophene-fused ending-group small molecular acceptor for efficient nonfullerene organic solar cells with 13.6% efficiency10.1002/aenm.201900041 ↗
12. Development of small-molecule materials for high-performance organic solar cells10.1007/s11426-015-5418-6 ↗
13. Asymmetric nonfullerene small molecule acceptors for organic solar cells
14. Mechanically robust all-polymer solar cells from narrow band gap acceptors with hetero-bridging atoms10.1016/j.joule.2020.01.014 ↗
15. A new electron acceptor with meta-alkoxyphenyl side chain for fullerene-free polymer solar cells with 9.3% efficiency10.1002/advs.201700152 ↗
16. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
17. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
18. Thiolactone copolymer donor gifts organic solar cells a 16.72% efficiency10.1016/j.scib.2019.10.002 ↗
19. 17% efficiency organic photovoltaic cell with superior processability10.1093/nsr/nwz200 ↗
20. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
21. Single-junction polymer solar cells with 16.35% efficiency enabled by a Platinum(II) complexation strategy10.1002/adma.201901872 ↗
22. A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency10.1039/C9EE01890E ↗
23. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
24. A trialkylsilylthienyl chain-substituted small-molecule acceptor with higher LUMO level and reduced band gap for over 16% efficiency fullerene-free ternary solar cells10.1021/acs.chemmater.9b02943 ↗
25. High efficiency polymer solar cells with efficient hole transfer at zero highest occupied molecular orbital offset between methylated polymer donor and brominated acceptor10.1021/jacs.9b09939 ↗
26. Solvent additive-free ternary polymer solar cells with 16.27% efficiency10.1016/j.scib.2019.03.024 ↗
27. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
28. Fine-tuning energy levels via asymmetric end groups enables polymer solar cells with efficiencies over 17%10.1016/j.joule.2020.03.023 ↗
29. 16.5% efficiency ternary organic photovoltaics with two polymer donors by optimizing molecular arrangement and phase separation10.1016/j.nanoen.2020.104447 ↗
30. Improving the photovoltaic performance of ladder-type dithienonaphthalene-containing copolymers through structural isomerization10.1039/C4TA02585G ↗
31. Naphthobischalcogenadiazole conjugated polymers: emerging materials for organic electronics10.1002/adma.201605218 ↗
32. A hexacyclic ladder-type building block for high-performance D-A copolymers10.1039/C5TA07942J ↗
33. Enhancing the performance of a fused-ring electron acceptor via extending benzene to naphthalene10.1039/C7TC04520D ↗
34. Naphthodithiophene-based nonfullerene acceptor for high-performance organic photovoltaics: effect of extended conjugation
35. Ladder-type dithienonaphthalene-based small-molecule acceptors for efficient nonfullerene organic solar cells10.1021/acs.chemmater.7b02887 ↗
36. Synergistic modifications of side chains and end groups in small molecular acceptors for high efficient non-fullerene organic solar cells10.1002/solr.201800053 ↗
37. Panchromatic ternary photovoltaic cells using a nonfullerene acceptor synthesized using C-H functionalization10.1021/acs.chemmater.7b04499 ↗
38. New small-molecule acceptors based on hexacyclic naphthalene(cyclopentadithiophene) for efficient non-fullerene organic solar cells10.1039/C7TA05809H ↗
39. Naphthalene core-based noncovalently fused-ring electron acceptors: effects of linkage positions on photovoltaic performances10.1039/C9TC05013B ↗
40. Dihydropyreno[1,2-b:6,7-b']dithiophene based electron acceptors for high efficiency as-cast organic solar cells10.1039/C9TA00614A ↗
41. Facile synthesis of polycyclic aromatic hydrocarbon (PAH)-based acceptors with fine-tuned optoelectronic properties: toward efficient additive-free nonfullerene organic solar cells
42. Dithienopicenocarbazole-based acceptors for efficient organic solar cells with optoelectronic response over 1000 nm and an extremely low energy loss10.1021/jacs.7b13239 ↗
43. Z-Shaped fused-chrysene electron acceptors for organic photovoltaics10.1021/acsami.9b10834 ↗
44. The role of connectivity in significant bandgap narrowing for fused-pyrene based non-fullerene acceptors toward high-efficiency organic solar cells10.1039/D0TA00520G ↗
45. Chemical properties and self-assembled-ordered structures of π-conjugated cooligomers consisted of 2,6-dialkoxynaphthalene-1,5-diyl, 2,1,3-benzothiadiazole-4,7-diyl, and 1,4-phenylenediethynylene units10.1007/s00289-017-2117-9 ↗
46. Microwave-assisted synthesis of 1,5- and 2,6-linked naphthylene-based ladder polymers10.1021/ma048595w ↗
47. A pentacyclic building block containing an azepine-2,7-dione moiety for polymer solar cells10.1039/C6PY00082G ↗
48. Insertion of double bond π-bridges of A-D-A acceptors for high performance near-infrared polymer solar cells10.1039/C7TA07049G ↗
49. D-A copolymers based on lactam acceptor unit and thiophene derivatives for efficient polymer solar cells10.1016/j.dyepig.2016.12.014 ↗
50. Breaking 10% efficiency in semitransparent solar cells with fused-undecacyclic electron acceptor10.1021/acs.chemmater.7b04251 ↗
51. Molecular engineering of central fused-ring cores of non-fullerene acceptors for high-efficiency organic solar cells10.1039/C8TA12465E ↗
52. A pentacyclic aromatic lactam building block for efficient polymer solar cells10.1039/c3ee41948g ↗
53. An efficient strategy to supervise absorption, mobility, morphology of photovoltaic molecule by inserting a D-A unit10.1016/j.dyepig.2019.03.050 ↗
54. New m-alkoxy-p-fluorophenyl difluoroquinoxaline based polymers in efficient fullerene solar cells with high fill factor10.1016/j.orgel.2017.07.005 ↗
55. Wavefunction and reactivity study of benzo[a]pyrene diol epoxide and its enantiomeric forms10.1007/s11224-014-0430-6 ↗
56. Terminal π-π stacking determines three-dimensional molecular packing and isotropic charge transport in an A-π-A electron acceptor for non-fullerene organic solar cells10.1039/C7TC01310H ↗
57. Isomer-free: precise positioning of chlorine-induced interpenetrating charge transfer for elevated solar conversion10.1016/j.isci.2019.06.033 ↗
58. Design of a highly crystalline low-band gap fused-ring electron acceptor for high-efficiency solar cells with low energy loss10.1021/acs.chemmater.7b02853 ↗
59. Narrow bandwidth luminescence from blends with energy transfer from semiconducting conjugated polymers to Europium complexes10.1002/(SICI)1521-4095(199911)11:16<1349::AID-ADMA1349>3.0.CO;2-W ↗
60. Small-molecule acceptor based on the heptacyclic benzodi(cyclopentadithiophene) unit for highly efficient nonfullerene organic solar cells10.1021/jacs.7b01170 ↗
61. High performance all-polymer solar cells by synergistic effects of fine-tuned crystallinity and solvent annealing10.1021/jacs.6b04822 ↗
62. Imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
63. Unveiling the important role of non-fullerene acceptors crystallinity on optimizing nanomorphology and charge transfer in ternary organic solar cells10.1016/j.orgel.2018.07.001 ↗
64. 26 mA cm-2 Jsc from organic solar cells with a low-bandgap nonfullerene acceptor10.1016/j.scib.2017.10.017 ↗