Single and double branched organic dyes based on carbazole and red-absorbing cationic indolium for p-type dye-sensitized solar cells: A combined experimental and theoretical investigation
Source abstract
Abstract
Abstract A series of novel single and double branched carbazole-based red-absorbing cationic dyes without (CSI and CDI) and with (CST and CDT) a thiophene spacer have been synthesized for p-type dye-sensitized solar cells ( p -DSSCs). The introduction of the red-absorbing cationic acceptor/thiophene spacer led to the broadening and bathochromic shift of the absorption maxima from an onset of 600 nm for CSI to 800 nm for CDT as well as improved molar absorptivity. The introduction of the double branching/thiophene spacer lowered the lowest unoccupied molecular orbital (LUMO) levels of CDI, CST, and CDT, making their potentials more positive than that of CSI. Among these, the double branched CDI exhibited the highest conversion efficiency of 0.112%. Furthermore, all of the dyes examined outperformed the standard C343 dye (0.062%), measured under similar fabrication conditions. Despite the decreased photovoltaic performance as a result of the introduction of the thiophene spacer, overall, the double branched dyes exhibited better interfacial charge transfer that led to higher J SC and V OC values compared to those of singly branched dyes. Electrochemical impedance spectroscopy analysis showed that double branched dyes have much lower charge transfer resistance and increased hole lifetime than single branched dyes. Density functional theory (DFT) and time-dependent DFT calculations were performed to theoretically characterize the optical and electrochemical properties of the synthesized dyes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
2. Dye-sensitized solar cells10.1021/cr900356p ↗
3. Sensitizer molecular structure-device efficiency relationship in dye sensitized solar cells10.1039/B920664G ↗
4. Kinetic and energetic paradigms for dye-sensitized solar cells: moving from the ideal to the real10.1021/ar900145z ↗
5. New photovoltaic devices based on the sensitization of p-type semiconductors: challenges and opportunities10.1021/ar900275b ↗
6. Highly-efficient dye-sensitized solar cells with collaborative sensitization by silyl-anchor and carboxy-anchor dyes10.1039/C5CC06759F ↗
7. Dye-sensitized solar cells with 13% efficiency achieved through the molecular engineering of porphyrin sensitizers10.1038/nchem.1861 ↗
8. Design of high-efficiency organic dyes for titania solar cells based on the chromophoric core of cyclopentadithiophene-benzothiadiazole10.1039/c3ee42331j ↗
9. Functionalized styryl bipyridine as a superior chelate for a ruthenium sensitizer in dye sensitized solar cells10.1039/c2dt30688c ↗
10. Comparative study on the photovoltaic characteristics of A–D–A and D–A–D molecules based on Zn-porphyrin; a D–A–D molecule with over 8.0% efficiency10.1039/C6TA09408B ↗
11. Recent advances and future directions to optimize the performances of p-type dye-sensitized solar cells10.1016/j.ccr.2012.04.017 ↗
12. Improving the performance of dye-sensitized solar cells with electron-donor and electron-acceptor characteristic of planar electronic skeletons10.1039/C5EE03309H ↗
13. Highly efficient photocathodes for dye-sensitized tandem solar cells10.1038/nmat2588 ↗
14. Synthesis, photophysical and photovoltaic investigations of acceptor-functionalized perylene monoimide dyes for nickel oxide p-type dye-sensitized solar cells10.1039/c1ee01148k ↗
15. KuQuinones as sensitizers for NiO based p-type dye-sensitized solar cells10.1039/C6NJ03466G ↗
16. Modulated charge injection in p-type dye-sensitized solar cells using fluorene-based light absorbers10.1021/am405610b ↗
17. A p-type NiO-based dye-sensitized solar cell with an open-circuit voltage of 0.35 V10.1002/anie.200900423 ↗
18. D–A–π–A featured sensitizers containing an auxiliary acceptor of benzoxadiazole: molecular engineering and co-sensitization10.1039/C5TA01371B ↗
19. Synthesis and properties of push-pull porphyrins as sensitizers for NiO based dye-sensitized solar cells10.1039/C4TA05974C ↗
20. Beneficial effect of electron-withdrawing groups on the sensitizing action of squaraines for p-type dye-sensitized solar cells10.1021/acs.jpcc.6b03965 ↗
21. Promoting charge-separation in p-type dye-sensitized solar cells using bodipy10.1039/C3CC46133E ↗
22. p-Type dye-sensitized solar cells with a CdSeS quantum-dot-sensitized NiO photocathode for outstanding short-circuit current10.1002/ppsc.201500174 ↗
23. Synthesis and investigation of the donor effect in novel hemicyanine organic dyes for p-type dye-sensitized solar cells10.1166/sam.2016.2511 ↗
24. Dye-sensitized nanostructured tandem cell-first demonstrated cell with a dye-sensitized photocathode10.1016/S0927-0248(99)00168-3 ↗
25. Polymer based photocathodes for panchromatic tandem dye-sensitized solar cells10.1039/C4EE01315H ↗
26. Thiolate/disulfide based electrolytes for p-type and tandem dye-sensitized solar cells10.1016/j.electacta.2015.09.026 ↗
27. Discrete photoelectrodes with dyes having different absorption wavelengths for efficient cobalt based tandem dye-sensitised solar cells10.1038/s41598-017-02480-y ↗
28. Increased photocurrent in a tandem dye-sensitized solar cell by modifications in push-pull dye-design10.1039/C4CC10230D ↗
29. Photophysical and electrochemical properties, and molecular structures of organic dyes for dye-sensitized solar cells10.1002/cphc.201200218 ↗
30. Novel carbazole-based dye outperformed the benchmark dye N719 for high efficiency dye-sensitized solar cells (DSSCs)10.1039/c2jm35267b ↗
31. Substituted carbazole dyes for efficient molecular photovoltaics: long electron lifetime and high open circuit voltage performance10.1039/b905831a ↗
32. Improved molecular architecture of D–π–A carbazole dyes: 9% PCE with a cobalt redox shuttle in dye sensitized solar cells10.1039/C5TA06548H ↗
33. Fabrication of a high-performance dye-sensitized solar cell with 12.8% conversion efficiency using organic silyl-anchor dyes10.1039/C5CC00464K ↗
34. Organic dyes containing carbazole as donor and π-linker: optical, electrochemical, and photovoltaic properties10.1021/am404948w ↗
35. Influence of different electron acceptors in carbazole-based organic sensitizers on the performance of dye-sensitized solar cells10.1166/jnn.2017.14077 ↗
36. Red-absorbing cationic acceptor dyes for photocathodes in tandem solar cells10.1021/jp4119937 ↗
37. Influence of the anchoring number in a carbazole-based photosensitizer on the photovoltaic performance of p-type NiO dye sensitized solar cells10.1039/C4RA08271K ↗
38. Synthesis and investigation of number of anchoring and spacer effect in triphenylamine-based organic dyes for p-type dye sensitized solar cells10.1166/sam.2017.2455 ↗
39. Squaraine-arylamine sensitizers for highly efficient p-type dye-sensitized solar cells10.1021/ol301860w ↗
40. Enhanced performance of the dye-sensitized solar cells with phenothiazine-based dyes containing double D−A branches10.1021/ol2000167 ↗
41. Multi-anchored sensitizers for dye-sensitized solar cells10.1039/C7SE00141J ↗
42. Effect of the linkage location in double branched organic dyes on the photovoltaic performance of DSSCs10.1039/C4TA05652C ↗
43. Thiophene-bridged double d-π-a dye for efficient dye-sensitized solar cell10.1021/cm302250y ↗
44. A comparison of the optical and photovoltaic properties of novel double branched organic dyes in dye sensitized solar cells10.1016/j.synthmet.2015.02.016 ↗
45. Alkyl chain length dependence of the charge-transfer, recombination and electron diffusion length on the photovoltaic performance in double donor-acceptor-based organic dyes for dye sensitized solar cells10.1016/j.dyepig.2016.05.035 ↗
46. Frisch · 2009
47. Density-functional thermochemistry. III. The role of exact exchange
48. Density-functional thermochemistry. IV. A new dynamic correlation functional and implications for exact-exchange mixing
49. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
50. Electrostatic interaction of a solute with a continuum. A direct utilization of ab initio molecular potentials for the prevision of solvent effects10.1016/0301-0104(81)85090-2 ↗
51. Ab initio study of solvated molecules: a new implementation of the polarizable continuum model10.1016/0009-2614(96)00349-1 ↗
52. Investigation of the photoinduced electron injection processes for p-type triphenylamine-sensitized solar cells10.1039/c1ee01638e ↗
53. Theoretical studies on POM-based organic–inorganic hybrids containing double D–A1–π–A2 chains for high-performance p-type, dye-sensitized solar cells (DSSCs)10.1039/C4CP04890C ↗
54. Substantial errors from time-dependent density functional theory for the calculation of excited states of large π systems10.1002/cphc.200390047 ↗