journal article·2015-01

Increasing thiophene spacers between thieno[3,2-b]thiophene and benzothiadiazole units in backbone to enhance photovoltaic performance for their 2-D polymers

Pei Zhou, Dongfeng Dang, Jiang Fan, Wenjing Xiong, Chuncheng Yang, Hua Tan, Yafei Wang, Yu Liu, Weiguo Zhu

Dyes and Pigments· Volume 112
Publisher page

Abstract

Abstract In order to investigate the effect of thiophene spacers in backbone between electron-rich thieno[3,2- b ]thiophene (TT) and electron-deficient benzothiadiazole (BT) units on the photovoltaic properties, novel two-dimensional (2-D) polymers with appending conjugated dioctylthiophene units in the 3,6-positions of TT were designed and synthesized, in which one or two thiophene spacers were embedded between TT and BT, respectively. The polymer with two thiophene spacers exhibited a broader absorption and higher power conversion efficiency in the bulk hetero-junction polymer solar cells. The best performance with efficiency up to 3.34% and short-circuit current values of 12.6 mA/cm 2 was obtained, which are 2.1 and 3.0 times higher than those corresponding values for the polymer with only one thiophene spacer. Our work indicates that increasing the numbers of thiophene spacers between TT and BT moieties in the backbone is an efficient method to enhance the photovoltaic performance of their 2-D polymers in polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
3. Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
4. Processable low-bandgap polymers for photovoltaic applications10.1021/cm1021855 ↗
5. Molecular design and ordering effects in π-functional materials for transistor and solar cell applications10.1021/ja2073643 ↗
6. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
7. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
8. Synthesis and photovoltaic effect in dithieno[2,3-d:2′,3′-d′]benzo[1,2-b:4,5-b′]dithiophene- based conjugated polymers10.1002/adma.201204238 ↗
9. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b]thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
10. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b: 2′, 3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
11. Donor–acceptor type low band gap polymers: polysquaraines and related systems10.1039/B204251G ↗
12. Effects of π-conjugated bridges on photovoltaic properties of donor-π-acceptor conjugated copolymers10.1021/ma202656b ↗
13. Structure-property relationships of oligothiophene-isoindigo polymers for efficient bulk-heterojunction solar cells10.1039/C3EE42989J ↗
14. A facile method to enhance photovoltaic performance of benzodithiophene-isoindigo polymers by inserting bithiophene spacer10.1002/aenm.201301455 ↗
15. Replacing alkoxy groups with alkylthienyl groups: a feasible approach to improve the properties of photovoltaic polymers10.1002/anie.201103313 ↗
16. Application of two-dimensional conjugated benzo[1,2-b:4,5-b′]dithiophene in quinoxaline-based photovoltaic polymers10.1021/ma300060z ↗
17. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications10.1002/adma.201203827 ↗
18. Efficient polymer solar cells with a high open circuit voltage of 1 volt10.1002/adfm.201201535 ↗
19. Significantly improved photovoltaic performances of the dithiophene-benzothiadiazole-alt-fluorene copolymers by incorporating carbazole units in fluorene moiety10.1002/pola.24825 ↗
20. Synthesis of a 4,8-dialkoxy-benzo[1,2-b:4,5-b′]difuran unit and its application in photovoltaic polymer10.1039/c2cc17708k ↗
21. Naphtho[1,2-b:5,6-b′]dithiophene-based donor-acceptor copolymer semiconductors for high-mobility field-effect transistors and efficient polymer solar cells10.1021/ma400177w ↗
22. Solution-processed ambipolar field-effect transistor based on diketopyrrolopyrrole functionalized with benzothiadiazole10.1002/adfm.201101820 ↗
23. Improved photovoltaic performance of two-dimensional low band-gap conjugated polymers with thieno[3,2-b]thiophene and diketopyrrolo-pyrrole units by altering pendent position of conjugated side chain10.1016/j.dyepig.2014.04.041 ↗
24. Synthesis and photovoltaic properties of D–A copolymers based on dithienosilole and benzo- triazole10.1021/ma201673m ↗
25. A novel benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymer with a pendant diketopyrrolopyrrole unit for high-performance solar cells10.1021/ma302243r ↗
26. Synthesis and photovoltaic performances of benzo[1,2-b:4,5-b′] dithiophene-alt-2,3-diphenyl- quinoxaline copolymers pending functional groups in phenyl rings10.1002/pola.26477 ↗
27. Structural design of benzo[1,2-b:4,5-b′]dithiophene-based 2D conjugated polymers with bithienyl and terthienyl substituents toward photovoltaic applications10.1021/ma401846n ↗
28. Electrochemical considerations for determining absolute frontier orbital energy levels of conjugated polymers for solar cell applications10.1002/adma.201004554 ↗
29. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗